Good day dear Sir. Can you advise, please, why "Manual update list" disappeared? I haven't push "CLEAR ALL" button, but the List has gone. note: The Manual Update objects still exist on the chart and I can check their properties by Pic Report.
Hello, after updating the manual, my list of updates disappeared, although the updates on the card were saved, “clear all” did not press, can you tell me what could be the reason?
Hi. Thank you for writing to us. Did you delete the old license of GB800001 before you loaded the new license? Have you tried to delete the chart and install it again? Brgds Furuno Maritime Training
Hi Blackpearl Thank you so much for your great feedback, and thanks for writing to us. The great question you have asked, is very comprehensive, so i would like to make a video about again. take care of yourself and have a great day. Kind regards Morten
Hi Thank you so much for watching our videos. And for writing to us with suggestions for more videos. Can you be more specific about what you want to know about NAVAREA, Thank you so much? Take care and have a great day 😊 🙏
Good day, can you advice how to plot sounding as the manual update by using function (copy from the chart), when I plot it is not displayed on big scales of enc only the scale which is displayed the natural object?
Hi Thank you so much for writing to us and sorry for the late reply. To answer your question. Right-click the object you wish to copy to show the context-sensitive menu, then click [Manual Update] and [Copy From Chart]. The Copy Chart dialog box appears. Click the object to copy, then click [Copy]. The object is copied to the [Manual Update] dialog box. Click the [Commit] button to add the object to the chart. I hope my answer could help you. Take care of yourself, and have a great day Kind regards Morten
@@furunomaritimetraining Good day, please advice also, if i am copy the objects, as you stated below.. how can I change the SCAMIN settings of this object that it will displayed on all ENC Scales.. if I am changing scale minimum settlings or fully delete the setting nothing will change, the object will be displayed with initial SCAMIN Settings
Hi Johninson Thank you so much writing to us, and for watching our videos that is really great. The explanation is a litle to extensive here to write, so i will make a brush up on youtube. basically you read the text in the T&P and find out if it has an effect on your routeplan. if it does then you use the Manual update to put the T&P in the chart. Please just write if you have more questions or suggestions Take care of yourself Kind regards Morten
Hi Mali Thanks for watching our videoes, that is really great. Thank you for asking that relevant question I never thought of that :) Well if you look in Symbol display menu on the general tab. Here you can see a text that says True outlines shown if. Then you can choose either length or beam width. then you can see own ship limit is 3 millimeter. so if the ship symbol becomes less then 3 millimeter when you zoom out then it turns into two rings and when you zoom in again it turns to a ship symbol when it reach the limit. Hope this answered your question. please if more questions just write :) Have a wonderfull day brgds Morten
Hi, thank you for watching. We really appreciate your question. We will look into making new videos about this topic. To be notified please subscribe to our youtube channel: ua-cam.com/channels/OLVLDswuZrdmLIYR2m-u2Q.html
Hi Thank you so much for keep watching our videos, and for writing to us. And for asking your super relevant question. In the Manual Update dialogue box, click the List tab, then click the object to hide/delete, then click the Remove button. The selected item is hidden from the chart display. Please do write if you have suggestions and more questions for us. Take care and have a great day 😊🙏
@@furunomaritimetraining Hello, after updating the manual, my list of updates disappeared, although the updates on the card were saved, “clear all” did not press, can you tell me what could be the reason?
Hi Vijay. Thank you so much for watching our videos, it is really great of you. We will make sure of that in the future, thank you for the feedback. please take care of yourself kind regards Morten
How about to modify an existing light. For example we want to change the nominal range only?
Is it possible to correct Vector charts and Raster charts ?
Is it possible to correct Vector manual updates?
Good day dear Sir. Can you advise, please, why "Manual update list" disappeared? I haven't push "CLEAR ALL" button, but the List has gone.
note: The Manual Update objects still exist on the chart and I can check their properties by Pic Report.
Hello, after updating the manual, my list of updates disappeared, although the updates on the card were saved, “clear all” did not press, can you tell me what could be the reason?
Hi
Thank you for writing to us.
The manual updates disappear if you do a reconvert of your charts, did you do that?
Brgds
Furuno Maritime Training
Sir I would like to know why my char GB800001 showing not up to date in cell status and Licence is valid in license window...
Hi.
Thank you for writing to us.
Did you delete the old license of GB800001 before you loaded the new license?
Have you tried to delete the chart and install it again?
Brgds
Furuno Maritime Training
Thank's for video , Great job..can you pls also expalain how to delete such mark (boy etc ) Because i can not find
Hi Blackpearl
Thank you so much for your great feedback, and thanks for writing to us.
The great question you have asked, is very comprehensive, so i would like to make a video about again.
take care of yourself and have a great day.
Kind regards
Morten
Same I also need that info on delete option..
thank you. pls make more videos
Hi
Thank you so much for watching our videos. And for writing to us
with suggestions for more videos.
Can you be more specific about what you want to know about NAVAREA, Thank you so much?
Take care and have a great day 😊 🙏
new subsciber sir. thank you so much! more videos and lectures sir. more power😊
Hi Pj
Great, thanks. We really appreciate it😊
Brgds
Morten
Good day, can you advice how to plot sounding as the manual update by using function (copy from the chart), when I plot it is not displayed on big scales of enc only the scale which is displayed the natural object?
Hi
Thank you so much for writing to us and sorry for the late reply.
To answer your question.
Right-click the object you wish to copy to show the context-sensitive menu, then
click [Manual Update] and [Copy From Chart]. The Copy Chart dialog box appears.
Click the object to copy, then click [Copy]. The object is copied to the [Manual Update]
dialog box.
Click the [Commit] button to add the object to the chart.
I hope my answer could help you.
Take care of yourself, and have a great day
Kind regards
Morten
@@furunomaritimetraining Good day, please advice also, if i am copy the objects, as you stated below.. how can I change the SCAMIN settings of this object that it will displayed on all ENC Scales.. if I am changing scale minimum settlings or fully delete the setting nothing will change, the object will be displayed with initial SCAMIN Settings
How to add T&P correction and what is the option copy from the chart in manual update.
Hi Johninson
Thank you so much writing to us, and for watching our videos that is really great.
The explanation is a litle to extensive here to write, so i will make a brush up on youtube.
basically you read the text in the T&P and find out if it has an effect on your routeplan. if it does then you
use the Manual update to put the T&P in the chart.
Please just write if you have more questions or suggestions
Take care of yourself
Kind regards
Morten
What is the meaning of 2 round circle which showing vessel position ?
Hi Mali
Thanks for watching our videoes, that is really great. Thank you for asking that relevant question
I never thought of that :)
Well if you look in Symbol display menu on the general tab. Here you can see a text that says
True outlines shown if. Then you can choose either length or beam width. then you can see own ship limit is 3
millimeter. so if the ship symbol becomes less then 3 millimeter when you zoom out then it turns into two rings
and when you zoom in again it turns to a ship symbol when it reach the limit.
Hope this answered your question. please if more questions just write :)
Have a wonderfull day
brgds
Morten
I would like to ask, how to put NO GO AREA SIGN in FURUNO FMD?
Hi, thank you for watching. We really appreciate your question. We will look into making new videos about this topic. To be notified please subscribe to our youtube channel: ua-cam.com/channels/OLVLDswuZrdmLIYR2m-u2Q.html
@@furunomaritimetraining Thank you....
How to delete a manual update? Plz reply
Hi
Thank you so much for keep watching our videos, and for writing to us.
And for asking your super relevant question.
In the Manual Update dialogue box, click the List tab, then click the object to hide/delete, then click the Remove button. The selected item is hidden from the chart display.
Please do write if you have suggestions and more questions for us.
Take care and have a great day 😊🙏
@@furunomaritimetraining Hello, after updating the manual, my list of updates disappeared, although the updates on the card were saved, “clear all” did not press, can you tell me what could be the reason?
Videos is not so clear,pls try to upload clear videos, though ur video is very useful.thanks
Hi Vijay.
Thank you so much for watching our videos, it is really great of you.
We will make sure of that in the future, thank you for the feedback.
please take care of yourself
kind regards
Morten
New subrcriber here..pls upload more sir
Hi Christopher
Thank you so much for watching, we will.
Take care