Thank you very much for placing this video !! - I wonder though about reinstalling the new pads; as I see some form of spring-retainer fixed onto the back-edge of each pad. Additionally, how are the second set of caliper retaining bolts fitted, yet still able to spring in and out (you greased these) while they are tightened (I assume) ?
Igor Dimoski , I have problem with right side disk brake.When I press to pedal for stop it makes sound like "tak or tukk".it is same when I want to go after braking.Tomorrow I want to look for the problem.Have you seen that problem yet?
Igor Dimoski , thanks for your helps.Today I have found the problem.The problem is on brake pad.İt has a sheet metal label behind of pad.This label has been left from pad surface.So when I use brake pedal it makes noise.I took it away and the problem solved.best wishes from İstanbul.
@@mechanicigor Thank you, your instruction was great and has helped me now change both pads then discs and pads, thanks mate!!! keep up the great work!! xxx
@@mechanicigor Thank you very much for your fast reaction. To my second comment, just under this one, I don't have an answer, but I suppose I should just start and see how it goes. My son tells me though that this is an earlier model and therefore a bit different.
Thank you very much for placing this video !! - I wonder though about reinstalling the new pads; as I see some form of spring-retainer fixed onto the back-edge of each pad.
Additionally, how are the second set of caliper retaining bolts fitted, yet still able to spring in and out (you greased these) while they are tightened (I assume) ?
Good job but you could show that how you have been assembly the pads
Ali Titiz it's very easy to install the pads sorry for didn't show them
Igor Dimoski ,
I have problem with right side disk brake.When I press to pedal for stop it makes sound like "tak or tukk".it is same when I want to go after braking.Tomorrow I want to look for the problem.Have you seen that problem yet?
It's possible pistons that hold the caliper to have bigger tolerance or ball joint on that wheel
Igor Dimoski , thanks for your helps.Today I have found the problem.The problem is on brake pad.İt has a sheet metal label behind of pad.This label has been left from pad surface.So when I use brake pedal it makes noise.I took it away and the problem solved.best wishes from İstanbul.
Ali Titiz glad to help
What size trox to remove brake disc please?
I think was torx 30
@@mechanicigor Thank you, your instruction was great and has helped me now change both pads then discs and pads, thanks mate!!!
keep up the great work!! xxx
Thank you can you please chec this
ua-cam.com/video/dSB2HfG1ayE/v-deo.html
Који је момент затезања шрафова (19 mm) који држе носач кочионих клешта?
105 Nm? Надам се да могу да мењам дискове без скидања носача клешта (Sandero 1.4).
Moras da go izvadis nosacot a jas gi stegnav na raka bez kilazen kluc ne znam kolku treba Ali 105 nm mislam deka e previse
@@mechanicigor Хвала.
There are 7 Comments they say, but I only see two ?
There are 2 comments but with one of them I have been chatting so you can see the reply on the square icon below the comment
@@mechanicigor Thank you very much for your fast reaction.
To my second comment, just under this one, I don't have an answer, but I suppose I should just start and see how it goes.
My son tells me though that this is an earlier model and therefore a bit different.
@@MrGregHiller sorry I don't respond I don't understand the question correctly that's why I didn't answer
@@mechanicigor OK, anyhow, thanks all the same.