F61 error can be cause by faulty regulator IC. Shorting pcon to ground with a jumper will turn on the regulator board, you can then check the voltages listed on the main board. Mine was missing 9v for the cassette and 3.3v. The 9volts from the regulator chip was missing. I think the gf hit the tape button, cassette motors maybe seized, blew the 9v. Added a three terminal 9v regulator next to the main regulator to just supply the 9v. Cut the wire that supplies the 9v to the cassette and works like a charm. 3.3v came back with the 9 volts fixed, don’t use the cassette any more all good 👍
I have the same panasonic sound system Recently it is not turning on, Red color light on the power button comes on while connecting to the power supply. Clicking the power button nothing happens, just a click sound appears. Do you have any suggestions ?
I'm getting the F61 error. It's the 2nd best system I've had. It turns on, it says welcome, but no sound, I switch to CD, Tape, nothing. It stays on for a bit, then the error pops up. I had CDs in the player, so I removed them before I may not be able to get them out. Is it worth getting fixed? Panasonic no longer makes this type.
Hello Brother, cd changer in my ak 88 does not respond. Whenever i turn it on it shows cd change to disc 1 but nothing happens. I have tried putting the ribbon onve again but no luck. Any idea what could be the reason?
@@CABohol mechanical parts are ok, the problem is motor does not even give a try to move the changer. I have 3 systems of same model and all 3 have the same problem. I tried swapping the changers but no luck 😪
@@chakreshniit maybe the problem is the mainboard... Try to find a service manual of that model, some stereo system has a reset or factory settings function.
I was able to re-solder some connections on the power IC amp. Fortunately my panasonic sa vk550 back to life. But how to test if the cooler fan is defective. When i power on it didnt turn. Is this the main reason when the volume+ to i think 22db f61 appears again
@@CABohol as far as i can remember when you power on the component then its cooler fan starts and then It went off again. If temperature rises automatically cooler fan switch on
I too had same blinking light problem I opened now there is no power supply comes till transform but relay doesn't switch on what could be the fault please advise
I have a Panasonic SA AK 75 with a 50+1 cd player; I went to turn the cd player on and all of a sudden it says ERROR. I doubt that it's the same problem. I went to school for this and was going to give it to my nephew because how loud it can go; but I can't fix it. Opened it up and the shuffle won't move and I attempted to put a cd in manually to no avail ( no cd's are in there)... don't know what to do
Sir saan ka sa negros? Sayang ang panasonic ko sa vk550 lng to pero maganda sound neto. Already cold solder ang ilang connector. Gumana na sya. Pero i think ang cooling fan sguro sira. Nacheck ko if pgpower on di sya umiikot. Pano matest if sira ang cooling fan?
I have same model of Panasonic SC AK 177..is not getting powered ON..red light near soft power switch is remain ON but no display and system is OFF...no Error showing of course...as a technical person I checked power supply ( Fuse) found OK...nothing burn parts and all clean..kindly help me out please..Thank you so much.
Check first the Audio IC,.. The F61 means audio amplifier failure,.. And also try to check and clean the fan,.. If the fan is not turning the system will send error message...
This is what happened I was playing it then the ac wire got accidentally plugged out then when I plugged back in it gave that message and was a loud humming from the speakers
@@CABohol yes my service manual po ako sir ng probs po hangang pasok lmg sa sound processor ic la napo indication ng aux signal palabas. Puede po makuha fb mo po?
@@toto073081 Possible defective na ang AD Converter nyan Sir, modefied nyo nalang po ang circuit... sa Tuner nalang po kayo kumuha para sa AUX input.. langyan nyolang po ng DPDT na switch para magamit Rin ang tuner... same lang po name ng FB ko.
Omg kuya ito po yung problema ng component namen, kapag pinakita ko po ito sa tech pisible po alam na nila ang gagawin? Baka lokohin na naman po kasi kami. Anu po ba sasabihin kapag dinala dun Hindi ko po kasi alam tawag sa ganyan sira eh, pero ganyan po lumalabas sa screen din ng component lalu kapag malakas na ang sound nag ooff po siya tas ganyan sa screen nakikita. Sana ma help at ma advice mo po kami. Maraming salamat po.
@@CABohol Hello po sir, Aahh sige po. Pinaayos na po namen before new year eh, Ganun pa din po parang di po alam nung tech kasi sabi ko F61 ang na labas sa screen. Nung inuwi namen sa bahay ganun pa din prob. Kaya ipapanuod ko na lang po ito video mo po sir tiyak makaka tulong at dagdag kaalamanan sakanya.
@@Sabrina-sc4gd May madownload naman service manual sa Net ng ganitong model ma'am, nangdon lahat ng information sa ganyang error, pero possible talaga Audio IC Chip or lost connection sira nyan.
My CD deck always says "open and take out disk" but can't take out other disk in deck two etc. Can't play radio or another things. Don't have money to buy new system 😭
Hi bro.I got the same error message with my Panasonic SA-AK75. Any suggestions what to do? It worked for me for over 20 years without any problem, until now.. Can it be fixed? Thanks
First try to reset Bro,.. Follow the manual for the procedure if the problem still exist check the electronic components and some cold solder joints. That error message means there's a problem with the audio IC or other electronic components, also check the fan if it's turning...
@@CABohol Just opened it and audio IC looks fine. I dont have the manual for reset instruction. I will take it to the servise. Im not compentent to try messing around with it any further. The CD changer is like half of complete stereo. Lol Btw, I dont see any fan inside..
Joints look ok, to me.. It happened when I accidentally pushed one more button while trying to switch to AUX from radio when I turned the system on. I might only need a reset, but dont know how exactly to do that..
I got the same problem then came here. What i did then was i just slap the radio then suddenly it’s functioning😁
Sama laa..tampar baru ok
I did that, it worked for a whole day then turned itself off. When I tried it a 2nd time I got the "F61" error notice.
F61 error can be cause by faulty regulator IC. Shorting pcon to ground with a jumper will turn on the regulator board, you can then check the voltages listed on the main board. Mine was missing 9v for the cassette and 3.3v. The 9volts from the regulator chip was missing. I think the gf hit the tape button, cassette motors maybe seized, blew the 9v. Added a three terminal 9v regulator next to the main regulator to just supply the 9v. Cut the wire that supplies the 9v to the cassette and works like a charm. 3.3v came back with the 9 volts fixed, don’t use the cassette any more all good 👍
Nice thanks for sharing.
Would it be bad sound quality if I kept only the audio section, excluding CDs and cassettes?
Nope!
how did you find out that the problem is the connector. wow
By inspecting the board and voltage test points.
This solution also works for the Panasonic SA-AK 33 ?
Just try or check the Audio IC.
Thx bro it's work
I have the same panasonic sound system
Recently it is not turning on, Red color light on the power button comes on while connecting to the power supply.
Clicking the power button nothing happens, just a click sound appears.
Do you have any suggestions ?
Check the power supply section for missing voltage.
Same here
I'm getting the F61 error. It's the 2nd best system I've had. It turns on, it says welcome, but no sound, I switch to CD, Tape, nothing. It stays on for a bit, then the error pops up. I had CDs in the player, so I removed them before I may not be able to get them out. Is it worth getting fixed? Panasonic no longer makes this type.
F61 error message means Audio IC failure. Try to resolder the IC and audio section circuit.
Hello Brother, cd changer in my ak 88 does not respond. Whenever i turn it on it shows cd change to disc 1 but nothing happens. I have tried putting the ribbon onve again but no luck. Any idea what could be the reason?
Check the mechanical part, like gear or belt.
@@CABohol mechanical parts are ok, the problem is motor does not even give a try to move the changer. I have 3 systems of same model and all 3 have the same problem. I tried swapping the changers but no luck 😪
@@chakreshniit maybe the problem is the mainboard... Try to find a service manual of that model, some stereo system has a reset or factory settings function.
I was able to re-solder some connections on the power IC amp. Fortunately my panasonic sa vk550 back to life. But how to test if the cooler fan is defective. When i power on it didnt turn. Is this the main reason when the volume+ to i think 22db f61 appears again
I think the fan will turn on automatically if the temperature of the Audio IC or heatsink rises.
@@CABohol as far as i can remember when you power on the component then its cooler fan starts and then It went off again. If temperature rises automatically cooler fan switch on
I too had same blinking light problem I opened now there is no power supply comes till transform but relay doesn't switch on what could be the fault please advise
Check if there's a short circuit. Use the service manual as a reference.
I have a Panasonic SA AK 75 with a 50+1 cd player; I went to turn the cd player on and all of a sudden it says ERROR. I doubt that it's the same problem. I went to school for this and was going to give it to my nephew because how loud it can go; but I can't fix it. Opened it up and the shuffle won't move and I attempted to put a cd in manually to no avail ( no cd's are in there)... don't know what to do
Panasonic Sa ak 38 model ic repair ka kya charge he sir
tengo el mismo problema en el ak 52 cual es la solucion ?
Bai,saon pag dli mogana ang input unsa posible damage,nka cd mode ra xa,dli mausab ug aux,tuner,etc.asay e check ntu ani
Echeck ang mga tact switch Bai. Limypohi mga flex cable.
Bro f61 model sa-ns77md
Problem: i start dag then all light on and onoy 3 to 4 sec then off dag but does not power light off
I've got this system in my workshop if I leave it on standby it's fine ,but if I unplug it and the weather turns wet/damp I get this code.
Resolder the AMP Section maybe some coldsolder problem.
Ganito rin ang component ko 2001 pa binili til now ayos pa kaso nagjujump ang cd pag nagpapatugtog ano kya problema.
Try to clean and reset some flex cable.
taga bohol ka pre?
Negros island. 🏝
@@CABohol aw abihan nkog taga bohol ka, kay naa unta koy ipa ayo nga panasonic
Sir saan ka sa negros? Sayang ang panasonic ko sa vk550 lng to pero maganda sound neto. Already cold solder ang ilang connector. Gumana na sya. Pero i think ang cooling fan sguro sira. Nacheck ko if pgpower on di sya umiikot. Pano matest if sira ang cooling fan?
I have same model of Panasonic SC AK 177..is not getting powered ON..red light near soft power switch is remain ON but no display and system is OFF...no Error showing of course...as a technical person I checked power supply ( Fuse) found OK...nothing burn parts and all clean..kindly help me out please..Thank you so much.
Try to check the output voltage of power supply section and some regulators.
Bro try to switch the voltage selector at the back. What i did. fortunately my stuff went on.
hyed, can you show me how to fix amplifier panasonic su ch51 show error code U70
Just try to search the service manual, and follow the procedure of error code.
F61 error in a technics SE HD51 im pretty sure its the amplifier thing but idk how to fix it
Visual check for some burnt components. And also check some voltages it's easy if you have schematics or service manual.
i have a sa-ak77 is it the same procedure
Check first the Audio IC,.. The F61 means audio amplifier failure,.. And also try to check and clean the fan,.. If the fan is not turning the system will send error message...
This is what happened
I was playing it then the ac wire got accidentally plugged out then when I plugged back in it gave that message and was a loud humming from the speakers
@@yogie217 Try to Press "STOP/TUNE MODE" button for 5 second's,.. To clear all the error
None of these things worked imma just throw it away
Sir good am. Pahelp naman pls. Lang sound ang aux po pero my signal sa display. Pagtuner tumutunog naman ano kaya fault neto?😊
Download kapo ng schematic diagram, tapos trace mo yung connection ng aux saan papunta.
@@CABohol yes my service manual po ako sir ng probs po hangang pasok lmg sa sound processor ic la napo indication ng aux signal palabas. Puede po makuha fb mo po?
@@toto073081 Possible defective na ang AD Converter nyan Sir, modefied nyo nalang po ang circuit... sa Tuner nalang po kayo kumuha para sa AUX input.. langyan nyolang po ng DPDT na switch para magamit Rin ang tuner... same lang po name ng FB ko.
@@CABohol yan lmg sir di ko alam.
@@CABohol ngpm ako at ngrequest ng friend request. Bala msend Ng diAgram pano ba
سلام لنگ این ظبط رودارم صداشوزیادمیکنم f61میده چیکارکنم ممنون میشم راهنمای کنییدتعمیرکارهستم بایه توضیح متوجه میشم ممنونم خسته نباشین 2:15
I have the same problem, when I increase volume the device turns off and display f61
Help me please 🙏
Check the circuit for some cold solder.
keep up the good works! cheers!
Thanks Sir...
@@CABohol p
VCD stereo or only CD stereo?
CD
Omg kuya ito po yung problema ng component namen, kapag pinakita ko po ito sa tech pisible po alam na nila ang gagawin? Baka lokohin na naman po kasi kami. Anu po ba sasabihin kapag dinala dun Hindi ko po kasi alam tawag sa ganyan sira eh, pero ganyan po lumalabas sa screen din ng component lalu kapag malakas na ang sound nag ooff po siya tas ganyan sa screen nakikita. Sana ma help at ma advice mo po kami. Maraming salamat po.
Pag ganyan kasing error ma'am, possible defective ang IC Amplifier or cold solder. Alam nayan ng mga tech maam.
@@CABohol Hello po sir, Aahh sige po. Pinaayos na po namen before new year eh, Ganun pa din po parang di po alam nung tech kasi sabi ko F61 ang na labas sa screen. Nung inuwi namen sa bahay ganun pa din prob. Kaya ipapanuod ko na lang po ito video mo po sir tiyak makaka tulong at dagdag kaalamanan sakanya.
@@Sabrina-sc4gd May madownload naman service manual sa Net ng ganitong model ma'am, nangdon lahat ng information sa ganyang error, pero possible talaga Audio IC Chip or lost connection sira nyan.
@@CABohol Sige sige po. Maraming Thank you sir! More vids tutorial pa po soon. Happy new year po!!
@@Sabrina-sc4gd Welcome po ma'am, Happy new year din po! God Bless.
porque mi ak 52 se pone ni bien lo enciendo a cd y de ahi no funciona ningun control
Saan po pinagawa to
It is sure ????????????? 🤔😟
Yes, also read the service manual for all the repair details.
My CD deck always says "open and take out disk" but can't take out other disk in deck two etc.
Can't play radio or another things.
Don't have money to buy new system 😭
Bhai main jaisey CD open karta hun error dikhata gain kiu
Tengo uno igualito pero nomás no prende dice f61
Hello Greetings from India 🇮🇳 💐 Are you selling this system? If yes I would like to purchase it from you 💐 🙏 Thanks 💐
Nope.
Hi bro.I got the same error message with my Panasonic SA-AK75. Any suggestions what to do? It worked for me for over 20 years without any problem, until now.. Can it be fixed? Thanks
First try to reset Bro,.. Follow the manual for the procedure if the problem still exist check the electronic components and some cold solder joints. That error message means there's a problem with the audio IC or other electronic components, also check the fan if it's turning...
@@CABohol Just opened it and audio IC looks fine. I dont have the manual for reset instruction. I will take it to the servise. Im not compentent to try messing around with it any further. The CD changer is like half of complete stereo. Lol
Btw, I dont see any fan inside..
Joints look ok, to me.. It happened when I accidentally pushed one more button while trying to switch to AUX from radio when I turned the system on. I might only need a reset, but dont know how exactly to do that..
@@Kyirux try to download the service manual of that model and follow the procedure of how to reset the component.
@@Kyirux the reset procedure of this model is,.. Press "STOP/TUNE MODE" button for 5 second's,.. To clear all the error
Bro same system but sound is cutting in between bro any solution plz
Check the audio IC.
@@CABohol where it will be bro
How to fix as-ak177 no power displays
Check power supply section.
CA. Bohol what do you mean? Is it the cable could be different power ability?
Bro f61 error in Panasonic SA-AK88 please help bro
Check the Audio IC bro...
Bhaiya mere mein bhi aise likh raha hai kaise problem solve ho jaega
Speak English Sir,.?
We are from India we don't speak English
Tengo el mismo problema
проще промыть спиртом !!!!!!