I did everything according to the video and still got the 5 beeps. I fixed it by gently bending or forcing both contacts in the CMOS battery receptacle to improve the contact to it. One or both of them were not touching the battery correctly so the motherboard could not find it and beeped 5 times again anda again as if there wasn't a battery installed.
This did not fix my Pc without an extra step. I had the same error condition with the beeps. After replacing the battery the beeps were still there. I remembered having a boot up issue when I installed a SSD in my other Pc. What cleared that issue was the following: after booting up and seeing the error condition I held in the power button until the Pc shut off then, while STILL HOLDING IN THE POWER BUTTON, I unplugged the power cable, waited 5 to 10 seconds, released the power button, then plugged it back in. After this the beeps went away.
Hello, sir, I have a 280 gm3 ddr4 HP PC, I have a problem with the default beep. The Bios settings initially change the battery. Then I default the bios. Why is the long beep.
THANK YOU!!! I have been trying to fix all morning and you were the first one to tell me to replace the battery! Who knew! It worked. cheers!!
I did everything according to the video and still got the 5 beeps. I fixed it by gently bending or forcing both contacts in the CMOS battery receptacle to improve the contact to it. One or both of them were not touching the battery correctly so the motherboard could not find it and beeped 5 times again anda again as if there wasn't a battery installed.
Thanks it was the battery, i just replaced it and now my pc is working again thanks man you the best 👌
Fixed the problem directly, thank you, was almost givning up😂🙏🏼👏🏽👏🏽👏🏽
This did not fix my Pc without an extra step. I had the same error condition with the beeps. After replacing the battery the beeps were still there. I remembered having a boot up issue when I installed a SSD in my other Pc. What cleared that issue was the following: after booting up and seeing the error condition I held in the power button until the Pc shut off then, while STILL HOLDING IN THE POWER BUTTON, I unplugged the power cable, waited 5 to 10 seconds, released the power button, then plugged it back in. After this the beeps went away.
Its not working
Thanks for the solution, it is really very helpful 👍👍👍
Thank you!! This was informative!!
As a newbie builder, do i have to learn about shorting circuits And all that?
No it is only needed in very rare occasions
Wonderful video. Thanks brother
Hello, sir, I have a 280 gm3 ddr4 HP PC, I have a problem with the default beep. The Bios settings initially change the battery. Then I default the bios. Why is the long beep.
Thank you sir for your help .my board ok now
Do you have the dell vostro 270s?
Good work
Thanks ,,same problem Inspiron 660s Desktop.. this proses flow and solve this problem
Thanks :)
Even after doin these, display says no signal
Tq brother🎉🎉🎉
My pc 6 beep please tell solution
bro isme kitne karcha aa jyga plez tell me
Very well solved
so amazing, thanks a loot
Thank u
Dont help
Nhi chla