For glitter lines you don’t have to add extra glitter just add what you want then let resin sit and start to cure once it gets to a thickness you like use a fat syringe without needle like ones use for injecting marinade don’t use needle. Draw up thickened resin into syringe then squeeze out where you like . Your Geo turned out lovely .
Hello everyone! As you can see, this video is from over a year ago. I plan to do a new more detailed tutorial VERY soon. Showing how I create textures and depth. Thanks for everyone who has subscribed and tuned in! I appreciate you! ♥️ Pleas check me out on IG @livingdreamscanvas, I’m much more active there.
Hi! Thank you for watching!!! You guys definitely missed part of the process, I believe I did a few steps off camera. I spoke about it shortly after I started the glitter lines. I’m so sorry! It was my first tutorial at that time. But I added detail lines with a silver paint pen. If those are the lines you’re referring to. 😊
@@LivingDreamsCanvas I apologize.. I heard you say that after I commented, & didnt change it.. 🤷♀️🤦♀️😆 ..still would've liked to see you do that part. I actually just started my first "geode", so I've been watching these videos.. I don't want to mess up the pour part. You did a good job on the video, & the artwork.. 😉
I used a hot glue gun! Once I started pouring resin, I drizzled over that area to really secure it in place. I’m sorry for responding months after the fact! I didn’t see your comment! 🤦🏽♀️♥️
Hi there! This board was pre-primed (got from Hobby Lobby) so I didn’t paint it before starting. The boards that aren’t primed I usually give a few coats of just regular paint primer or white paint before starting. 😊
I definitely recommend working in a very well ventilated space. Make sure you wear the proper ppe. Gloves, respirator mask, skin covered etc. Also put down plastic or a tarp of some kind. 😊
Hi! Yes, I didn’t record the glass process in this video at all. I only talked about it briefly. I’ll be doing a small geode video just show the process soon because a few people are interested. 😊
Thank you so much for your comment! I appreciate your support. I stated in this video it was my first time recording a tutorial. This also was two years ago. I’ve since gotten a better device to record on and my workspace isn’t a small corner of an apartment. 🫶🏾
@@LivingDreamsCanvas I’m so sorry. I have vertigo so could not watch very far. I had a hard time focusing. I’m a new subscriber because I love your work. Hope to be better soon so little things like videos don’t matter. You are a true artist.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I’ve posted a new geode tutorial for anyone interested! Thanks for your support! 🫶🏾
Thank you for the great instruction, especially your explanation on how to get glitter lines that are not too wide or "runny!" Now I know what to do!
Your technique is amazing! Beautiful!
Nice beautiful fantastic thank you for your time and efforts 🕊️🥰
This helped me so much thank you ☺️
love how this turned out great work
Beautiful I enjoyed watching
Beautiful work Looking forward to the more detailed tutorial.
So pretty! This is definitely one of the prettier ones I’ve seen videos on. New subscribers!
Beautiful work and very helpful
AMAZING!!! Love ur work.
great work!
Good job on your first video! Colors are great! Look forward to seeing more of your work.
Just gorgeous! Great job!!
Stunning.
Beautiful!
Stunning!! Thankyou for sharing :P
This is soooo beautiful!
Very pretty!! I love making these too. Love all that blings lol
For glitter lines you don’t have to add extra glitter just add what you want then let resin sit and start to cure once it gets to a thickness you like use a fat syringe without needle like ones use for injecting marinade don’t use needle. Draw up thickened resin into syringe then squeeze out where you like . Your Geo turned out lovely .
cool tip!!!
Great idea. How do you clean it out afterwards?
@@Decopainterandtea I throw away it cost like .25 to .50 cents . I buy by the bag full on amazon
@@leelastoma5809 Ah makes sense. Thank you.
Hello everyone! As you can see, this video is from over a year ago. I plan to do a new more detailed tutorial VERY soon. Showing how I create textures and depth. Thanks for everyone who has subscribed and tuned in! I appreciate you! ♥️ Pleas check me out on IG @livingdreamscanvas, I’m much more active there.
Do more of these this net and beautiful 😍!!!
This is beautiful!!!
Thank you for your support Auntie!
Amazing!!!!!!!!!!!!!!!!!!!!!
Thank you so much!
Really pretty.. Just wondering how you made all the small dark lines that appeared? 🤔 Its like we're missing part of the process... ??
Hi! Thank you for watching!!! You guys definitely missed part of the process, I believe I did a few steps off camera. I spoke about it shortly after I started the glitter lines. I’m so sorry! It was my first tutorial at that time. But I added detail lines with a silver paint pen. If those are the lines you’re referring to. 😊
@@LivingDreamsCanvas
I apologize.. I heard you say that after I commented, & didnt change it.. 🤷♀️🤦♀️😆 ..still would've liked to see you do that part. I actually just started my first "geode", so I've been watching these videos.. I don't want to mess up the pour part. You did a good job on the video, & the artwork.. 😉
How did you stick the crystals to the canvas? 🤔
I used a hot glue gun! Once I started pouring resin, I drizzled over that area to really secure it in place. I’m sorry for responding months after the fact! I didn’t see your comment! 🤦🏽♀️♥️
It is possible to use
Ink marker ,instead of oil marker
beautiful am did you paint your board 1st if so what with thanks
Hi there! This board was pre-primed (got from Hobby Lobby) so I didn’t paint it before starting. The boards that aren’t primed I usually give a few coats of just regular paint primer or white paint before starting. 😊
@@LivingDreamsCanvas okay thanks for reply ill gave it a go
Hi ! Would it be okay if I do this on my balcony? Or outside? Or does it have to be in doors ?
I definitely recommend working in a very well ventilated space. Make sure you wear the proper ppe. Gloves, respirator mask, skin covered etc. Also put down plastic or a tarp of some kind. 😊
Which base use for it?
Mdf, acrylic board, canvas board¿??
This is a pre-primed wood panel from Hobby Lobby.
Did you add more glass off camera?
Hi! Yes, I didn’t record the glass process in this video at all. I only talked about it briefly. I’ll be doing a small geode video just show the process soon because a few people are interested. 😊
Wipe off your lenses and check focus please. Add more lighting or do it by a window next time. Your work is stunning I want to see it all. Thank you.
Thank you so much for your comment! I appreciate your support. I stated in this video it was my first time recording a tutorial. This also was two years ago. I’ve since gotten a better device to record on and my workspace isn’t a small corner of an apartment. 🫶🏾
@@LivingDreamsCanvas I’m so sorry. I have vertigo so could not watch very far. I had a hard time focusing. I’m a new subscriber because I love your work. Hope to be better soon so little things like videos don’t matter. You are a true artist.