#42 Woodturning How to Stain and Colour an 11" Sycamore Bowl
Вставка
- Опубліковано 29 сер 2024
- It's been a while since I did any bowl turning or colouring, so it was great to get back in the workshop this week and turn a sycamore bowl from Ed Oliver at Oliver's Woodturning in Kent, UK.
You can see the great collection of blanks available at Oliver's Woodturning at www.oliverswood.... He has just taken in loads of sycamore, so why not grab a blank or two and have a go at colouring like this...let me know I sent you!
See Below for useful links to stuff used in this project.
At www.msabansmith..., you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list!
Hampshire Sheen: Find your nearest retailer: www.hampshiresh...
Something else of interest: Read my FREE newspaper at www.turnersrest...
The UK & Ireland Woodturning Symposium:
www.ukiws.co.uk
Useful Amazon links to related products used in this project. These links will take you to pages appropriate for your location:
Kits and Finishes
Wood Blanks: geni.us/1pZC
Airbrush and Compressor: geni.us/3zfB
Pyrography Machine: geni.us/Sjz
Watercolour Pencils: geni.us/3vIj
Spirit Stain: geni.us/7G2
Liberon Gilt Creams: geni.us/3Fxi
Powdered Metals: geni.us/3fZ7
Pen Kits: geni.us/3raA
Project Kits: geni.us/1Kbf
Blow Torch: geni.us/2VhP
Dremel 3000: geni.us/15xa
Dremel Burrs: geni.us/3zqw
Lathes Tools and Accessories
Lathes: geni.us/VIu
Scroll Chucks: geni.us/v7C
Jacobs (Drill) Chuck: geni.us/3KGt
Box Set of Tools: geni.us/4AhX
Thin Parting Tool: geni.us/ym7
Captive Ring Tool: geni.us/BnF
Spiralling Tool: geni.us/2MKd
Bench Sharpening Grinder: geni.us/qBX
Fingernail Jig: geni.us/429R
Centre Finder: geni.us/3XLh
Live Centre: geni.us/AiI
Pen Mandrels: geni.us/C8C
Personal Safety
Face Shield: geni.us/3OrM
Respirator: geni.us/Z44
Keep up with my socially!
Facebook: / msabansmith
Twitter: / msabansmith
Google+: plus.google.co...
Instagram: / msabansmith
*** Small Print and Disclaimer: Woodturning can be dangerous. The project in this video is a demonstration of a woodturning project suitable for beginners and is not intended to replace a physical lesson from an experienced woodturner.
At all times, you are responsible for your own safety, that of your workshop and other people in it. Ensure you wear suitable personal safety equipment at all times.
This is my way of turning this project - Other turners may turn it differently and you may find your own way of reaching the same result.
By copying these techniques, you do so at your own risk.
Please note that I am not sponsored by any of the companies or products linked to in the 'Useful Links' section. Nor do I necessarily endorse them.
Thank you for your understanding. - Навчання та стиль
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
Another brilliant demo
Who the hell dislikes this video!? You may not like the finished product but you have to admire the skill and artistry that goes into it. I think it’s superb and off to buy some colour!
I love it when the professional guys like yourself are willing to share the fact that you don’t always get it right first time...it gives us novices a real sense of reality rather than always feeling inadequate and stupid. My professional tutor is exactly the same and puts up with my inabilities! I am sure I can hear him scream in the garden when I am at his place.
Hey Kevin. Thanks for the comment. No-one's perfect, and if I can help people through my mistakes and help prevent them making the same ones, then the job's a good'un.
Thanks Martin. Good learning skills..:>
I am from North Carolina,USA, i just starting and I really love your work,it is beautiful!
Hi Martin, you are a natural communicator and an excellent teacher. Brilliant videos.
that looks incredible!!! the more i watch your videos the more i want to give turning a go and have just decided that in the new year i will purchase a lathe :) Thanks Martin :)
***** will do, i will post them on my channel :) thanks again :)
Beautiful Platter Martin!! you cant beat a bit of old school colouring!! came out stunning mate!! Steve.
You certainly came back with a bang mate, that is absolutely stunning. Thank you for taking us through the process you use, and showing the techniques you employ. Excellent video.
Take care
Mike
Beautiful job Martin. That grain just pops. Keep it up brother.
I love your creative way of thinking about woodturning! I hope that someday I will create something as beautiful as your crafts and I will be able to earn for a living by woodturning. Have a nice day Martin and continue making so great videos!:)
Martin, that turned out great. I enjoyed watching the process that you took to get the colors just right. Your work paid off, that's a beautiful piece. And yes, you succeeded in making it both interesting and inspirational.
@17:21 "Oh, yeah!" Gotta love that feeling.
It’s nice to see I’m not the only one who takes several tries to get the desired look just right. I would be shocked if my finishing ever came out just right on the first try.
Hi Joe. It's never a bad thing to go over something again if you're not happy with it. I play with stuff regularly until I'm happy with it.
All the best,
Martin
Hi Martin, I have never thought about burning just the inside of rim of the platter before. I really like the effect. I also like how you burn the outside and brought it in to meet the interior burning. I struggle with selecting and applying colors. You have inspired me. Thanks, Tina in St Augustine Florida
Good morning Tina. Thank you for your kind comment. It's a privilege to be able to inspire people through UA-cam.
All the best,
Martin
Definitely not bored love seeing your creative mind at work
Thanks Mumma Toni. Good to hear from you again. I hope you will enjoy the next batch of videos which will be coming soon.
All the best,
Martin
M. Saban Smith Woodturning absolutely always enjoy your videos greatly as you teach me so much with the art side omethings as that fascinate me and excited me
Love it Martin!! Especially that you showed the whole trial and tribulations of coloring this stunning bowl, I'll sure try this on my own, now I've got a little scorching and even a little less coloring, under my belt. I'm going to make a series of Cypress bowls and plates to try this on, it's a light colored wood which takes well to scorching and to coloring, I might even mix some alcohol dye instead of water dye... might go crazy!! :) Thanks for sharing Martin!
Brilliant use of colour layers, lovely piece.
Must admit I've never been a big fan of it, but this (and the others you have done) is superb. You may have even persuaded me to have a go. All the best Ian.
Martin, thank you so much for the great details, you're definitely a Bob Ross of wood turning! Every time you're about to add something I think... oh man, he's gonna mess it up! Then BOOM- It turns out even better! I'm new to adding color to my wood turnings, but can't wait to try it out :)
Great project and a lovely final piece Martin! Great to see you turning again :)
Lovely bowl Martin really therapeutic to watch great end result thanks Daniel .:)
Beautiful Piece very nice video Martin! Thanks for sharing your colorizing process and being honest about it.
I have received "Big Magic - Creative living beyond fear" book for Christmas and your video fits right in! In order to to explore creativity, we need to manage fear (of messing up the work) and you do that pretty well. So this interesting video goes hand-in-hand with the topic of the book. Thanks for the video and the result is stunning.
Hello Martin,
Your projects are never boring and always interesting,
That's another beautiful bowl.
I wish I had your artistic flair.
Hope the Christmas season goes well for you.
Best wishes,
Alan,
Yet another inspirational video Martin have a great Christmas and new year
Great end look, I was not sure during the process. Merry Christmas & Happy New Year.
Very nice plate Martin, Best wishes Harry
Great piece Martin.👍 Whenever I use blue dyes my kids think I've been squashing Smurfs! 😂 Good use of gloves... might steal that idea.😉
Have a good one!
That looks great.
Best Wishes, Brendan.
Very detailed video, good work. The bowl looks great
Very cool and such great work
Brilliant day in Carpentery Store Nass yesterday with Martin
Hi Michael. Thanks for coming along to the Carpentry Store. It was a good weekend despite the weather on Friday.
Martin,
You are a real master of color. Thank you for sharing your technique with everyone.
Merry Christmas and Happy New Year
Nice video. Thanks for sharing and happy holidays.
Very nice Martin thanks for sharing
Very well done. Great work.
Brilliant, off to the workshop I go!
Enjoy!
Very nice plate my friend, congratulations! Cheers! Daniel
Just wandered over to your channel from Mike Waldt's and am so glad I did. Am new to turning so I am seeking to learn all I can from all that is offered on YT. You offer a treasure trove of info. Thanks so much and I'm, obviously, on board as a subscriber.
Thank you very much for your kind words and your subscription. I am so pleased you enjoyed the video and hope you continue to enjoy my productions.
Best wishes,
Martin
Stunning piece Martin. Time very well spent and great to see the process.
very nice Martin, Best wishes for the festive season from Deb and myself.Cheers from OzJohnny
nice one turned out super in the end :)
very good love your work, I found this video very inspiring I would like to give this a go hope I do your work justice take care and keep up the good work I love watching
thanks to show the techniques very nice
joao
Love it,absolutely love it!! Hope you get the compressor sorted out soon! Cheers Martin,and Merry Christmas, Keith.
nice job Martin.
Hi Daniel. Good to hear from you. Thanks for the comment.
All the best,
Martin
martin nice work.
Hi Martin,
I’ve been watching you on UA-cam for the last few months and trying out some of the things you have shown. It’s really great.
I’ve also been watching you make the lady with the hat video and I think you are a superb artist.
Can you tell me where you got the wood in your back yard and also a list of prices for your dyes.
Keep up the good work and updates on Hampshire Sheen.
Thanks Brian
Hi Brian. Thanks for asking, and thanks for your kind words. Sorry it's taken a while to get back to you. The wood I get comes from all sorts of places. Some I buy, some is given to me, some comes from trees around our property. The colours are available in different sizes: 15ml Sample Set of all 12 is £24.99. Full Set of 12 in 150ml Bottle is £50.00 and the individual bottles are £8.50 each. Retailers can be found here: www.hampshiresheen.com/buy.
Things have been very busy with the business I've been struggling to find the time to film stuff!
All the best,
Martin
hi Martin, would you have got the same, better or not so good results with your air brush, i was just wondering.
Thanks dave
Hi Martin I wanted to ask you how thick should a platter be I've never made one before if you could help me that would be great by the way I love your video's! Larry from the USA
Thank you for your question Larry from the USA. I have added it to my Q&A notes.Martin
It seems something has gone wrong with this video - there's no sound at all. I made sure it's not a problem on my end.
also Martin how big are your platter's? love the look! thank Larry from USA
All of my woodworks I made with wood prix. Google and try it.