Axial SCX10 Pro + Vitavon = AWESOME!
Вставка
- Опубліковано 5 жов 2024
- Absolutely beautiful axles!! Brass is perfect too! exocagedrc.com/
Vitavon Pro Front Axle ebay.us/H5zKzE
Vitavon Pro Rear Axle ebay.us/9V3Izx
Scx10 Pro Kit
Amain bit.ly/3Zma2hi
Horizon bit.ly/3N6cbds
Tower bit.ly/43l4dCO
Amazon amzn.to/3qlX06X
Ebay ebay.us/YWYjQf
Reefs RC RAW800
Amain bit.ly/44yZi1o
Hobbywing Fusion Pro 2300
Amain bit.ly/3TbZnTY
Flysky GT5
Amazon amzn.to/3z5VAOV
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
Amain Hobbies bit.ly/2RsdBVl
Horizon Hobby
Tower Hobbies bit.ly/3o7twsR
ArmedAmericanSupply (Clothing)
Buck Knives bit.ly/3yCoXZK
BeardBrand (BeardStuff) bit.ly/3xD6af8
HeadBanger Lures (Fishing) bit.ly/3MIFpvZ
#pro #scx10 #kit
I figured your first move to send 'Crowley' would be to tie down the front end like you've done before with rubber bands or shock cord.
Some of us don't recognize all the different tires by the tread and you didn't mention them in your breakdown. Trenchers?
Thanks for the videos. Son and I are building our first serious rock crawler. using the scx10 pro as our starting point.
These trucks are making you hard lines look to easy now. Time to build some new harder lines for them
Yup. Ther a beast
I don't know much about the chassis you have but to help the T.T rear upper links as low as possible on the chassis side and maybe a link riser for the axle. I know this helped a lot on my 10.3 straight axle build to control it more.
I love your channel and what you do. Your driving is incredible. The white plastic shelf backdrop? Not so much. Friendly tip, change it up Exo! 👍😁
Killer job Joe I could see the front being a little wider but not the rear
Love the heavy breath to start each clips...lol
Man EXO when are you going to give us a tour of all your cars because I'd love to see that and im pretty sure everyone else that watches you would to lol
That extra weight really helps glue that thing down!👍👍😁😎✌️
Dangggg... I'd really like to see vitavon offer a modular axle like the original axles are...
Thanks for sharing. When are you working on the boomracing series 3 again? 😊
It’s funny looking at the pro compared to the 410 pro. My Vanquish pro without all that brass, seems to be much more composed wenn crawling.
I still want the Axial pro though 😂
Id love to see you build a capra with those spare axle housings,i used to like watching your capra videos,those videos of yours are one of the main reasons i bought a capra,a three gear skid and maybe the west desert wheeler micro servo winch adapter would be sweet 🤙🏻
So I’m about a build like this, but it begs the question, weather the pro kit is expensive or not, why not just start with the chassis by itself and the Vitavon axels and straight build it up. I’ve stopped buying rc’s for that reason, and “mostly” just build them from scratch now. It takes longer. You don’t get the instant gratification of buying a new RC, but you save the cost of buying the stock one.
In stock form the pro is amazing. Just build and drive. Tune as needed and have fun.
I THINK A LITTLE LESS SQUAT IN THE REAR AND YOU WILL HAVE MORE PUSH TO GET WEIGHT ON THE FRONT AXLES FOR CRAWLEY.
Whooohoooo the pro heck ya....it's a super rig...what body is that ..wer from??
Have you changed your rear upper link points changing your anti-squat?
Need some heavier wheels for Crowley
Do you not sell the pro axle on your website
Why are neither Axial or Vitavon thinking to spline the axle tubes to be able to set your pinion angle and caster independently? Especially on the PRO AXLES?
Can you buy just the axle shafts, and will they fit stock housings with maybe a bearing change?
Which chassis are you running now? It doesn't look like the stock pro chassis and I know you removed the rp one. You should raise your rear upper links on the chassis side for a little more link separation. I noticed it's squatting the rear end on climbs, which transfers weight to the rear on steep climbs. Raising the links raises anti-squat, lifts the rear/pushes the front down on climbs, and will get you a little more stability on steep climbs.
Stock chassis. I couldn’t get the other one to drive well for some reason. I’ll mess with links soon. I really want to get Crowley. 😂
Heads up the price for the front axel is $220 +$19 shipping
Hi sir where I can buy that axle thank I want to change my axle like that
Put those axles on a gspeed v4
maybe stiffer springs at the back
They look super nice, i checked the price and holy shiz 370 for a set of axles 😂
Yeah they aren’t cheap.
I don’t like that the new housings are wider. In my opinion this truck likes to be narrow
What? when did this happen and where was I?
How can I stop the original shocks from leaking, the whole stocks are oily, and the whole on top is leaking as well
...Green Slime made by Associated, put some on the shock-shafts & I believe also the "o"-rings.
- Or, if you don't mind mixing parts, replace your shocks with Dravtech Shocks, or some TRX4 factory shocks, & you can pick between (4) colors, last I checked !! ✌️
what about a brass front axle and a titanium rear axle
Can you try the heavy Losi mini t springs on rear for Crowley just to see if it shoves front down ?
Nice
Porn axles 😋💥💪sweet rig man 👍
👍😁
More kraton 8S!!!! 😁 way to short video!
91👍😁