*SPARK GO BLUE TOOTH DISCONNECTING* There seems TO be another issue with the Spark Go disconnecting from Bluetooth on Android phones/tablets. After doing some digging, one common resolution is to change the display refresh rate of your device to 60hz. Why? Heck if I know, but it's worth a shot.
Sounds better plugged into a stereo or an amp . But honestly for the price , a practice amp . Worth it because I get right to it wherever I'm at . I'm thinking of starting a channel specifically for patches on different modelers. I've got a few real good ones for the " spark go" . I'll admit it wasn't easy , the little speaker and limited shaping options , tends to sound harsh and brittle by nature.
The crackle sound is real, the hi output setting helps, but it does it with every guitar I own, single coil, humbuckers, all of them. But yet it doesnt crackle when I blast music from youtube or spotify. I dunno, seems like the speaker should be able to handle anything the amp can throw at it. I also own the Spark 40 and it doesnt have this issue. It has other issues, but not a crackle issue. The saving grace is the Go can be used as a effects pedal jacked in to a real amp.
I gave up on trying to make it sound good at high volume and sold it. It's doesn't have as many settings, but I found the NUX Mighty Air to sound much better.
I don't have the mini and haven't tried one, but I was going to buy one before I got this. The mini is probably going to sound bigger and better. There are a ton of people that are truly disappointed with the go. I don't mind it, but I do wish it was louder.
Be careful with the headphone jack. It is very sensitive easy to break. Mine failed after 7 months, trying to get warrantee service. The new cabinet will require connection via the headphone jack I believe with the Go. Man, I can’t see this jack holding up to that!
Was so frustrated with the issues I had with this amp I returned it and bought a NU-X. Tried all the documented tweaks and fixes but still couldn’t cure the cut outs and general lack of sustain on notes.
I used mine for silent practice, i.e. through headphones so volume not to much of an issue, just couldn’t replicate those bb king bends and sustain, just died😂. Liking the NU-X though, does what I want just fine👍
Super bummed, mine seems to be completely dead on arrival. Can't get it to turn on no matter what I do. Guess I have to go through the Amazon return rigmarole 😮💨
@@Guitarnivore Appreciate the reply. They have one coming in today 🙌 I just have to take the original one back to Whole Foods within a month. Not going to lie, I'm concerned of the long-term term reliability if they're coming off the production line faulty but we'll see.
I have 2 of them and both have the same issue where it sounds like a cable or a wire issue like if I have a super high distortion lead it’s gonna sound clean but like the signal is being lost…I know both my guitar jack and the guitar aren’t the problem as I have no suck issue when plugging the guitar in my other amps…only my 2 sparks go sound like this it’s super annoying and driving me crazy… Both work fine with music through Bluetooth too…
I ended up selling mine. I just couldn't get on with it. Even with the Hi-z turned on, it still sounded horrible with high gain and even clean stuff. I may get a mini some time, I don't know.
@@Guitarnivore Mine sounds OK now. It's set on balanced and mono. Hi-z kept off otherwise it's sounds kind of weak. Maybe it got a software update as well, I didn't do it manually. What a mess 😅
I found one for sale. The owner says it´s not working because he tried to flash the wrong firmware update in it. There is any way to solve it? He is selling it for 60 bucks.
Hi - I am using an S23 Ultra connected via bluetooth - Running the latest firmware update, it keeps disconnecting from the amp whenever I go into a pedal or amp to adjust something. Have you run into this? Thanks for the great video BTW! I just subscribed!
Every now and then on my older 2016 Samsung tablet but not on my phone. I wonder if it's an app issue or an amp issue.🤔 I think more firmware updates will be coming in the near future.
my spark go only works when there's something plugged in the headphone jack, meaning there's no sound out of the speaker unless the headphones are plugged in. It's never happened before. Now in order to hear out of the amp I have to plug in head phones. Then of course i cant use headphones. What happened? Thanks!
That's a new one. Have you tried a factory reset? If that doesn't work, I would try to get up with Positive Grid on that and see if it's a warranty issue.
I had the same shit happen but if I knock or squeezed it I got it to cut in n out real fast . I guess I gotta open it up but I can find shit on opening it or anything with the internals . I figured atleast the Modders would have done something but it really needs a vid for it … if I can’t find anything I guys I can butcher mine like hellen keller trying to navigate a open heart surgery. Atleast the autopsy maybe help some one else , this is such a fuhqn bummer
I can control the settings through my app and hear my guitar but it will not play other audio. I have no issues with my Spark 40 but my spark go will not connect via Bluetooth audio. Driving me crazy.
Hi nice vid. When i'm on the music menu and i click on smart jam one pop up says "Download resources" i click download and then it says "Resources downloading" BUT it doesn't ... and i can't use the smart jam feature.. need help :(
Hi mate when I got my amp the other day it said something about the firmware up date I didn’t go ahead with that as I don’t have a lap top, anyways I was using my Gibson Les Paul custom through, it when I wasnt playing volume still on there was a hum sound from the amp, is this normal?
I need help mine just came in and when i hold it to turn on nothing happens but when i hold it for 10 seconds i get a white light flashing do i need to charge it or what?
@@andr3w694 the light should flash green when it's charging. Sounds like you might have to send it back. Before you do that, have you tried the factory reset steps? Holding the preset button and power button and see if the power light turns white. If and once it turns white, release both buttons and then press and hold the gold preset button until the preset lights all flash red once and then release. If all that happens, try powering it on again.
I've been trying to connect for past couple of days emailing back and forth with positive grid. My PC just isn't seeing the spark GO amp at all. Seems it's just charging up instead.
@@Guitarnivore Seems I'm having trouble doing that. When I try to download it it goes directly to Google Drive and says No Preview Available. Has a download option but it doesn't download. I think I have to turn off something in Google Drive but haven't figured that out yet.
I updated the firmware and was excited to change the EQ setting but when I try to change the EQ scenario it says "Unable to Reach Spark Amp" and disconnects my bluetooth connection..
Try this. Forget it from your tablet or phone and do a factory reset. You won't have to update the firmware again, so don't worry about that. Once the factory reset is complete, try changing the EQ again. Let me know if that works for you.
@@Guitarnivore thank you for your reply! I "forgot" the Spark Go on my phone, did the factory reset as per Positive Grid instructions and repaired it with my phone and the App. It's still giving me the same Unable to Reach Spark Amp message and disconnects my bluetooth, unfortunately.
@@annettebrosin8032 I find the issue happens every now and then on my tablet, but I notice when it says that, that its no connected in the Spark go menu, it's still connected and I can still make the changes. Do you have another bluetooth device you can try? A tablet or another phone, maybe?
I just got mine today. Straight away I need to update firmware. I don’t have a computer to do this and firmware cannot be updated by Bluetooth, iPhone or iPad. What the F??? I now have to buy a computer to update the firmware????
As soon as I connected it to the app and saw it needed a firmware update, I said, "That's gonna piss people off." You know anyone with a computer that can help you out?
@@Guitarnivore Thanks for the reply, I’ll be back in Phoenix in a couple months back in band practice where someone can help me out. Meanwhile I planned on travelling with this GO but I’ll leave it alone for now and use my other headphone amp with headless travel guitar.
hello Guitarnivore. Tone Control in Spark Go App has green checkmark but Bluetooth Audio has no green checkmark. Updated firmware, did factory reset, iPhone 13 has latest iOS 17.0.3. restart iPhone & Spark Go. Backing track music plays from iPhone. guitar plays from amp. Thanks!
Hello all, I just got mine on yesterday and it worked fine for the day. It was getting later in the day so I plugged in headphones. Went back to it this morning and now I only get sound when the head phones are plugged in. I can’t hear my guitar all the sudden unless I plug in my headphones. I haven’t updated the firmware yet as I was sure that was a requirement. I have done a factory reset but still get the same issue. Only headphones. Any ideas?
@@Guitarnivore thanks. I submitted a ticket so we’ll see what they say. Worked like a charm yesterday no indication it would suddenly turn out to be a lemon.
@@Guitarnivore ok damn it worekd..30 minutes noise non stop tho, do u think it damaged it ? Btw: do yours have very low bass too? like its normal and not just mine right xd?
@@cechichan Glad to hear. I doubt it damaged it. There isn't a lot of bass to this little thing. You could probably adjust the EQ, but too much bass makes it rattle. One thing I did find that made it sound better in a room is turning it up toward the ceiling.
@@Guitarnivore Yess it does, or towards you but having something in the back sounds nice too. Overall is a great little thing, compared to my quad cortex( ignoring the "lack" of lower end) its up there especially in feel, really impressive overall ;D Making me consider the Mini tho i fear it will defeat its purpose of extra portability.
My headphones when plugged into my spark go only ever play through the left ear I only got it recently and noticed this problem from the start and thought it was normal until my friend said his works in both ears
Having a really hard time Updating the firmware. So frustrating. Following the instructions . Downloaded upadte . Right clicked on the file but nowhere does it say "Run as administrator".
@@Guitarnivore I'm not even sure what that means. How do I find that out? Maybe us old folk shouldn't be buying there new fangled toys. I assumed this would be "plug in and play"🥸 *edit* yes I am set as an administrator
After the 1 year warranty expires I will tear this puppy up, drill a hole where that big hook screw is, make an inch wide 3D printed box, attach it to the side of the Go and wire a jack for preset footswitch and normal output ports like a stereo normal (not 3.5mm) jack and a L+R ports.
I haven't heard of any amps that you can record via bluetooth to Android or otherwise. I would assume you'd have latency issues trying to record anything with bluetooth.
@@Guitarnivore maybe so... but in that case why do they put a video module in their app ? With the Spark GO you can't even record via USB on Android ! 🫤
@@mrlionelb The video module is for playing along, I guess. Can you record via USB with iPhone? I'm just wondering. I sold My Spark Go a year ago because I just didn't think it sounded all that great.
@@Guitarnivore I don't know, I don't have an iPhone 🤷 It seems like there are quite a few disconnection issues as well, it's not really a functional tool. I'm thinking of selling mine too 😉
Did you turn on the Hi-Z option to see if that helps? I only just got mine and using Reaper. I don't think it's too hot as not seeing any clipping. The monitoring volume seems loud though and couldn't find a way to adjust it. I haven't tried with active pickups yet.
*SPARK GO BLUE TOOTH DISCONNECTING* There seems TO be another issue with the Spark Go disconnecting from Bluetooth on Android phones/tablets. After doing some digging, one common resolution is to change the display refresh rate of your device to 60hz. Why? Heck if I know, but it's worth a shot.
Refresh rate of the display? Thats weird.
@@kaptkrunchfpv It certainly is.
Thanks!!! I just got a new spark go and I'm hearing this crackling sound thought it was broken..
One of the MOST informative product vids Ive seen...thanks!
Yes its quiet, but where I use mine thats ok.
Hey, if you enjoy it, that's all that matters. I didn't enjoy mine, so I sold it and quite honestly, I'm glad you like yours.
Sounds better plugged into a stereo or an amp . But honestly for the price , a practice amp . Worth it because I get right to it wherever I'm at . I'm thinking of starting a channel specifically for patches on different modelers. I've got a few real good ones for the " spark go" . I'll admit it wasn't easy , the little speaker and limited shaping options , tends to sound harsh and brittle by nature.
The crackle sound is real, the hi output setting helps, but it does it with every guitar I own, single coil, humbuckers, all of them. But yet it doesnt crackle when I blast music from youtube or spotify. I dunno, seems like the speaker should be able to handle anything the amp can throw at it. I also own the Spark 40 and it doesnt have this issue. It has other issues, but not a crackle issue. The saving grace is the Go can be used as a effects pedal jacked in to a real amp.
I gave up on trying to make it sound good at high volume and sold it. It's doesn't have as many settings, but I found the NUX Mighty Air to sound much better.
Thanks for the review. I was having no success with the Firmware update. I will try again. Cheers.
Try running that .bat file as administrator. That was the only way I could get it to go through.
my iPhone says iPhone audio is connected to Spark Go, audio still comes out of the iPhone speakers - what gives? how to fix
I wish I had an answer for you. I would try forgetting the device, restarting the phone and try again.
Thanks for the review. I’m trying to decide between the Mini or the Go? Do you have the Mini or tried one?
I don't have the mini and haven't tried one, but I was going to buy one before I got this. The mini is probably going to sound bigger and better. There are a ton of people that are truly disappointed with the go. I don't mind it, but I do wish it was louder.
Buy another brand.
The spark go should never have left the factory like this, especially for the money it cost.
Buy something else.
@@peteywheatstraws4909You’re one of the few i’ll guess, almost everybody on YT is super positive about this small cheap practice amp.
Be careful with the headphone jack. It is very sensitive easy to break. Mine failed after 7 months, trying to get warrantee service.
The new cabinet will require connection via the headphone jack I believe with the Go. Man, I can’t see this jack holding up to that!
Good to know. This thing seems pretty problematic. I sold mine about a month ago.
Was so frustrated with the issues I had with this amp I returned it and bought a NU-X. Tried all the documented tweaks and fixes but still couldn’t cure the cut outs and general lack of sustain on notes.
I got frustrated with it as well and sold mind. It just wasn't loud enough for me.
I used mine for silent practice, i.e. through headphones so volume not to much of an issue, just couldn’t replicate those bb king bends and sustain, just died😂. Liking the NU-X though, does what I want just fine👍
Super bummed, mine seems to be completely dead on arrival. Can't get it to turn on no matter what I do. Guess I have to go through the Amazon return rigmarole 😮💨
Oh man. I hate that for you. I hope you get it squared away and have fun with it when you get an exchange.
@@Guitarnivore Appreciate the reply. They have one coming in today 🙌 I just have to take the original one back to Whole Foods within a month. Not going to lie, I'm concerned of the long-term term reliability if they're coming off the production line faulty but we'll see.
I have 2 of them and both have the same issue where it sounds like a cable or a wire issue like if I have a super high distortion lead it’s gonna sound clean but like the signal is being lost…I know both my guitar jack and the guitar aren’t the problem as I have no suck issue when plugging the guitar in my other amps…only my 2 sparks go sound like this it’s super annoying and driving me crazy…
Both work fine with music through Bluetooth too…
Thanks dude, I'll try the EQ fix because mt soynd is crackling all the time.
If it doesn't work I'll return it 😢
I ended up selling mine. I just couldn't get on with it. Even with the Hi-z turned on, it still sounded horrible with high gain and even clean stuff. I may get a mini some time, I don't know.
@@Guitarnivore Mine sounds OK now. It's set on balanced and mono. Hi-z kept off otherwise it's sounds kind of weak. Maybe it got a software update as well, I didn't do it manually. What a mess 😅
I found one for sale. The owner says it´s not working because he tried to flash the wrong firmware update in it. There is any way to solve it? He is selling it for 60 bucks.
😬I honestly don't know. I would pass.
@@Guitarnivore thanks
Hi - I am using an S23 Ultra connected via bluetooth - Running the latest firmware update, it keeps disconnecting from the amp whenever I go into a pedal or amp to adjust something. Have you run into this? Thanks for the great video BTW! I just subscribed!
Every now and then on my older 2016 Samsung tablet but not on my phone. I wonder if it's an app issue or an amp issue.🤔 I think more firmware updates will be coming in the near future.
@@Guitarnivore thanks so much. I appreciate the quick response.
Same problems, disconnect after 2 minutes
@@guypoulin8454 I read on Reddit that Positive Grid suggests checking the refresh rate of your device and set it to 60hz.
my spark go only works when there's something plugged in the headphone jack, meaning there's no sound out of the speaker unless the headphones are plugged in. It's never happened before. Now in order to hear out of the amp I have to plug in head phones. Then of course i cant use headphones. What happened? Thanks!
That's a new one. Have you tried a factory reset? If that doesn't work, I would try to get up with Positive Grid on that and see if it's a warranty issue.
I had the same shit happen but if I knock or squeezed it I got it to cut in n out real fast . I guess I gotta open it up but I can find shit on opening it or anything with the internals . I figured atleast the Modders would have done something but it really needs a vid for it … if I can’t find anything I guys I can butcher mine like hellen keller trying to navigate a open heart surgery. Atleast the autopsy maybe help some one else , this is such a fuhqn bummer
when im trying to play or listen to music on the spark go the sound only comes when i plug in my headset to it and not from the speaker
If a factory reset doesn't work, I would contact Positive Grid support. You're not the first person I've heard having this issue.
I can control the settings through my app and hear my guitar but it will not play other audio. I have no issues with my Spark 40 but my spark go will not connect via Bluetooth audio. Driving me crazy.
Hi nice vid.
When i'm on the music menu and i click on smart jam one pop up says "Download resources" i click download and then it says "Resources downloading" BUT it doesn't ... and i can't use the smart jam feature.. need help :(
Hi mate when I got my amp the other day it said something about the firmware up date I didn’t go ahead with that as I don’t have a lap top, anyways I was using my Gibson Les Paul custom through, it when I wasnt playing volume still on there was a hum sound from the amp, is this normal?
I don't think that's normal. Maybe the noise gate isn't set? All else fails, try doing a factory rest.
i have active pickups and i thought it was broken till i managed to find a tone in the app
can I use this straight to iphone so I could record sound to tiktok and duet too?
I'm sorry. I don't know. Hopefully someone else will be able to answer your question.
@@Guitarnivoreyeah no problem, yeah it would be rll nice.
iOS and Android aren't supported with it's interface capabilities
I need help mine just came in and when i hold it to turn on nothing happens but when i hold it for 10 seconds i get a white light flashing do i need to charge it or what?
You should only have to press it for a second or two to turn it on. I would try to charge it if it's not coming on.
@@Guitarnivore is there supposed to be a light on when plugged in or no cuz i had it plugged in with no light for 2 hours and it still isn’t working
@@Guitarnivore its plug in rn and no light is on but i saw flash red for a sec when i kept holding the button down
@@andr3w694 the light should flash green when it's charging. Sounds like you might have to send it back. Before you do that, have you tried the factory reset steps? Holding the preset button and power button and see if the power light turns white. If and once it turns white, release both buttons and then press and hold the gold preset button until the preset lights all flash red once and then release. If all that happens, try powering it on again.
@@Guitarnivore yes i have
I've been trying to connect for past couple of days emailing back and forth with positive grid. My PC just isn't seeing the spark GO amp at all. Seems it's just charging up instead.
Did you already install the update software?
@@Guitarnivore Seems I'm having trouble doing that. When I try to download it it goes directly to Google Drive and says No Preview Available. Has a download option but it doesn't download. I think I have to turn off something in Google Drive but haven't figured that out yet.
@@scottpull12 Can you right click on the download link and "save link as" and choose where to save it?
@@Guitarnivore Tried that and it saves it to the new spot but doesn't work when I try to open it.
@@Guitarnivore Tried another laptop and same issue.
spark go works with my eletric guitar, but with the acoustic, there is no sound coming
Have you checked the battery in your acoustic.
I updated the firmware and was excited to change the EQ setting but when I try to change the EQ scenario it says "Unable to Reach Spark Amp" and disconnects my bluetooth connection..
Try this. Forget it from your tablet or phone and do a factory reset. You won't have to update the firmware again, so don't worry about that. Once the factory reset is complete, try changing the EQ again. Let me know if that works for you.
@@Guitarnivore thank you for your reply! I "forgot" the Spark Go on my phone, did the factory reset as per Positive Grid instructions and repaired it with my phone and the App. It's still giving me the same Unable to Reach Spark Amp message and disconnects my bluetooth, unfortunately.
@@annettebrosin8032 I find the issue happens every now and then on my tablet, but I notice when it says that, that its no connected in the Spark go menu, it's still connected and I can still make the changes. Do you have another bluetooth device you can try? A tablet or another phone, maybe?
@@Guitarnivore I borrowed my partner's phone and after installing the Spark app on there, I was able to make all the changes I wanted :) Thank you!
@@annettebrosin8032 good to hear. Enjoy!
I just got mine today.
Straight away I need to update firmware.
I don’t have a computer to do this and firmware cannot be updated by Bluetooth, iPhone or iPad.
What the F???
I now have to buy a computer to update the firmware????
As soon as I connected it to the app and saw it needed a firmware update, I said, "That's gonna piss people off." You know anyone with a computer that can help you out?
@@Guitarnivore
Thanks for the reply, I’ll be back in Phoenix in a couple months back in band practice where someone can help me out.
Meanwhile I planned on travelling with this GO but I’ll leave it alone for now and use my other headphone amp with headless travel guitar.
hello Guitarnivore. Tone Control in Spark Go App has green checkmark but Bluetooth Audio has no green checkmark. Updated firmware, did factory reset, iPhone 13 has latest iOS 17.0.3. restart iPhone & Spark Go. Backing track music plays from iPhone. guitar plays from amp. Thanks!
help.positivegrid.com/hc/en-us/articles/360045697291-Bluetooth-Connection-Troubleshooting-Guide
Same issue here. Driving me crazy. No issues with my Spark 40 but my Spark Go will not connect.
Hello all, I just got mine on yesterday and it worked fine for the day. It was getting later in the day so I plugged in headphones. Went back to it this morning and now I only get sound when the head phones are plugged in. I can’t hear my guitar all the sudden unless I plug in my headphones. I haven’t updated the firmware yet as I was sure that was a requirement. I have done a factory reset but still get the same issue. Only headphones. Any ideas?
Wow. That's strange. I would try contacting Positive Grid support. Seems like a lot of people are having a lot of different problems with this thing.
@@Guitarnivore thanks. I submitted a ticket so we’ll see what they say. Worked like a charm yesterday no indication it would suddenly turn out to be a lemon.
@@lastjedii I have the same Problem. Was yours fixed by the support?
Yeah they sent me something to install and it worked after.
@@lastjedii Do you still have the link? I suppose it was a firmware update?
I changed the tremolo settings now it crashed and for the last 10minites make a white noise non stop and cant even close it
Try holding the power button for like a full minute. This is like the third time I've heard of this happening. They need some kind of reset button.
@@Guitarnivore gonna try that again then. Shirt they rly need a reset button
@@Guitarnivore ok damn it worekd..30 minutes noise non stop tho, do u think it damaged it ?
Btw: do yours have very low bass too? like its normal and not just mine right xd?
@@cechichan Glad to hear. I doubt it damaged it. There isn't a lot of bass to this little thing. You could probably adjust the EQ, but too much bass makes it rattle. One thing I did find that made it sound better in a room is turning it up toward the ceiling.
@@Guitarnivore Yess it does, or towards you but having something in the back sounds nice too. Overall is a great little thing, compared to my quad cortex( ignoring the "lack" of lower end) its up there especially in feel, really impressive overall ;D Making me consider the Mini tho i fear it will defeat its purpose of extra portability.
My headphones when plugged into my spark go only ever play through the left ear I only got it recently and noticed this problem from the start and thought it was normal until my friend said his works in both ears
Go into the settings of the app and see if the HP/Line Out is set to mono or stereo. It may be set to mono.
Having a really hard time Updating the firmware. So frustrating. Following the instructions . Downloaded upadte . Right clicked on the file but nowhere does it say "Run as administrator".
What version of Windows are you running?
@@Guitarnivore Windows 11
@@brianhackett-jl3hc is the your account set as administrator in Windows?
@@Guitarnivore I'm not even sure what that means. How do I find that out?
Maybe us old folk shouldn't be buying there new fangled toys. I assumed this would be "plug in and play"🥸
*edit* yes I am set as an administrator
@@brianhackett-jl3hc are you clicking on the folder or the .bat file? If you right click on the folder, you won't see anything about administrator.
Both my Desktop and Laptop wont detect my Spark Go
Could either be a bad cable or the unit output may be bad.
Positive grid sent me a faulty spark Go,,,still waiting for a response, buy local.
I hope they get it figured out for you.
Anyone get 'incorrect pairing code' when trying to use Bluetooth to your phone?
That's a new one. How would you even know if it was a correct code or not? That's odd.
After the 1 year warranty expires I will tear this puppy up, drill a hole where that big hook screw is, make an inch wide 3D printed box, attach it to the side of the Go and wire a jack for preset footswitch and normal output ports like a stereo normal (not 3.5mm) jack and a L+R ports.
Anyone using this and not getting bass to send anything to it?
Works with guitars but not the bass. Will have to firmware update I suppose.
I'll have to try it, but probably a good idea to change the EQ scenario to bass in the settings. I'll follow up.
Spark go won't charge
I sold mine. Regardless, have you tried another charging block or cable?
Unable to record audio via bluetooth on Android... Spark GO is to be avoided !!
I haven't heard of any amps that you can record via bluetooth to Android or otherwise. I would assume you'd have latency issues trying to record anything with bluetooth.
@@Guitarnivore maybe so... but in that case why do they put a video module in their app ?
With the Spark GO you can't even record via USB on Android ! 🫤
@@mrlionelb The video module is for playing along, I guess. Can you record via USB with iPhone? I'm just wondering. I sold My Spark Go a year ago because I just didn't think it sounded all that great.
@@Guitarnivore I don't know, I don't have an iPhone 🤷
It seems like there are quite a few disconnection issues as well, it's not really a functional tool. I'm thinking of selling mine too 😉
I don’t know why but recording with this is a bitchhhhh lmao I use reaper and for some reason the usb input is too hot
I haven't tried it yet. Reaper always has a bit of latency I don't like.
Did you turn on the Hi-Z option to see if that helps?
I only just got mine and using Reaper. I don't think it's too hot as not seeing any clipping. The monitoring volume seems loud though and couldn't find a way to adjust it.
I haven't tried with active pickups yet.