Це відео не доступне.
Перепрошуємо.
Morris Minor Stripping out the Interior, Bonnet & Boot, Project Mildred EP 01
Вставка
- Опубліковано 16 тра 2020
- In the First episode of Project Mildred, we show you how we Strip out the Interior, Bonnet & Boot.
During the Covid lockdown of 2020 Lou & Pete decided to purchase a Morris Minor 1000 1961 1100cc. With no prior experience in vehicle restoration they decided to undertake a challenge unlike any other they had undertaken before. This is their journey.
Help Support the Chanel : / projectmildred
contact us:
Facebook: @ProjectMildred
email: axbyandhirst@hotmail.com
Check out our other youtube Chanel: / @theislandworkshop8453
The gear we use :
Wurth Pump bottle & brake fluid : amzn.to/2MNxIYf
Amtech wire brush set : amzn.to/37qgeei
3 in 1 oil : amzn.to/2UCsV06
Amtech panel body hammer kit : amzn.to/2B2RXyt
Parweld 115mm 100pk cut off discs : amzn.to/3dVMurQ
6 Rolls masking tape : amzn.to/3ffjDPx
Steel Straight edge : amzn.to/2AqM7qV
Flux core welding wire 3pk : amzn.to/30zAcSs
Hilda parts washer : amzn.to/2UxEZA0
Air Punch / flange punch : amzn.to/3fjobEP
Air Die grinder : amzn.to/2AZVMEK
Tungsten cutters : amzn.to/2UzYl7j
Wire wheel 6 inch : amzn.to/30KyoWT
Skin pin pliers : amzn.to/3fe0c9L
Skin Pins : amzn.to/37oDzg5
Spot weld cutters : amzn.to/2MMcV7w
Flap discs 115mm 10 pk : amzn.to/3hlk3G8
Parts washer / degreaser : amzn.to/3fgitTW
Air pistol/ smaller : amzn.to/30A1VCy
Valve spring compressor : amzn.to/30y3rF5
Autotek etch primer grey : amzn.to/30wRWO3
Sealed breaker bar : amzn.to/2Uy3uNa
Impact sockets 5pk : amzn.to/2MS6G1Y
Sanding discs sorted : amzn.to/3hhimtb
Engine paint enamel : amzn.to/2Uyt30G
Valve lapping kit : amzn.to/2YtMl8u
Feeler gauges : amzn.to/3dVPwMK
Torque wrench : amzn.to/30wSJP1
Stud remover : amzn.to/3hmlAeO
Haynes manual : amzn.to/3fgjYBy
Gazebo : amzn.to/3hlrRre
Peggs : amzn.to/30Cnr9x
wire wheels : amzn.to/2Ys0CCF
Welding jacket : amzn.to/30uWLHT
welding pliers : amzn.to/30xpv2x
welding tips : amzn.to/3hlmGI0
Gt85 : amzn.to/2Yp6htf
If you guys would like to help support there channel, please take a look at our new Patreon page: www.patreon.com/projectmildred
Subscribed. Looking forward to watching more!
thanks allot, we are going to be uploading every sunday
Hi pete & Lou , funny thing is them mice seem to love making a home in the back seats of classic cars my new project a car l always liked a Riley 1.5 had the remains of a nest in the back seat, and before that my Morris minor too.
oh you wait mate, in a bit we show the head liner being removed and they were in the head line as well, what a mess
Great to see the start of a restoration 👍 That’s quite a resto’ you’ve got there. Subscribed 👍
Once completed you will be in that enviable position of knowing exactly what’s what with your car 😀
Join the fb groups and a local club 👍 lots of knowledge in those forums and sometimes a good source of spares 😊
Oh yes already joined as many groups as possible, and already proved invaluable. We are allot further forward than the video. Already fully stripped out and engine striped. New videos every sunday
Also from the Island picked up your channel from The Gentleman's Motor Racing Team, now subscribed and only recently this car was always parked on the main road coming into Godshill.
yes mate thats right, it belonged to Neil Lilleys son, NDL Electrical. it came up for sale and me and the wife impulse purchased it just like a crunchy at the supermarket tills, thanks for subbing, new videos every sunday and a tool review video every friday
Great video 👍 looking forward to following your progress, lovely original colour 💗
Thanks new videos uploaded every sunday,
Looks like a big job but a great project to do. My first car was a Morris Minor, love them! Would love a genuine convertible for some summer fun but way beyond my pocket these days. I look forward to following your progress.
thanks for watching, you can get bargains out there, but i imagine this in the end will probably cost about 5k in total over say a year or so. you can get convertible kits for a standard hard top
Such a simple little car gotta Love a Minor they are a bit hard to get a hold of here in Australia
haha yer it would take a bit of effort to get one over to you, do you watch Badgertronix ? ua-cam.com/channels/oQd1dh55tqF-tbGuVnWPGg.htmlvideos i think he is based in NewZealand
Great video just subscribed :)
Crikey, you got yourself a job there!
From a fellow moggy owner.
Subscribed.
yer she was an impulse buy as well, just two weeks ago on a saturday afternoon it popped up on Facebook, my wife said what do you think, she was delivered on the sunday. lockdown madness
Project Mildred 😂👍
@@montyzumazoom1337 i will be posting the new videos every sunday night so keep a look out mate
Project Mildred Looking forward to it fella.
hope you will go for black and whiteplates when she is finished.
oh yes, it has to be doesn't it thanks for watching
Glad to see your uploads just when i am looking into owning one.Wonder how much you paid for it in that condition in USD
we paid £1130, at the end of each video we are showing a running tally of spend and hours, it drove but wasn't in great shape, the young lad that sold it to us used it as his daily driver but was going to UNI. such simple cars to work on we are total DIYers, thanks for watching, new video every sunday
@@projectmildred2940 Thanks for your response. I have subbed and will be following closely.Wishing you well in your build.
@@williemwangi4959 thank you hope you enjoy
Good luck. Have you decided to go back to the original paint colour? Looks like Filford Grey
hi mate, yes funnily enough my wife wanted to put her back to a very similar colour, maybe a bit lighter, she's the boss
I guess you need all 'british' tools for this (i'm in NZ and its been metricated since the 70's)
Are they readilly available in the UK?
is that claredon grey?
not too sure, we need to have a better look and work out the original colour, it has had a red paint job over the original and then a blue over the top of that. my wife wants basically the original colour, maybe a shade lighter, thanks for watching
dont look like morris boot hinges!
oh ok, i will be researching what bits to put back, thanks for the heads up