Outstanding job! I would have liked to seen more detail and not had the fade to next angle been so quick. Thank you for sharing. One of the nicest Revell kit builds of this ship that I have seen!
CONGRATS ON A NICE BUILD ,, SHE LOOKS GREAT ,, CUTTY SARK IS MY NEXT BUILD ,, IN THE MIDDLE OF THE HELLER HMS VICTORY KIT AT PRESENT WHICH IS A MAJOR TASK , HAVENT DONE A REVELL KIT IN A LOOONG TIME ,, BUT SHE LOOKS THE BUISNESS :))
Several suggestions. You put a lot of good work into this model. I'd have replaced the plastic sails with very fine silk or linen cloth. Then, I'd have removed the preformed deadeyes and installed wood ones, with proper lines. And, not used the plastic ratlines. One final note. The lashings on the yardarms should be black, not white.
Thanks for the comments. It's in time. I am going to restore this model. I have a lot of mistakes. I will correct them. Not so long ago I shot a video of the original clipper from a camera and a drone. ua-cam.com/video/OVV88ToOkWs/v-deo.html Hope it helps.
Sergej Babenko Hi. Redoing the deadeyes will be a very challenging job. Very challenging, indeed. I guarantee that she will look much, much better. Putting real shrouds with ratlines will be another challenge, but again she will look much better. Since you are going to restore the model, you should take off all the running rigging as well, or making the ratlines will be quite difficult. am finishing a big wood Constitution and put cloth sails, and they look good. For the edges of the sails, don't try to fold and hem them with sewing. Use a laundry iron to iron on a special thin transparent tape on the edge of the sail without folding the edge of the sail. Any fabric store will know about this product. You cut the sail cloth without the cloth unraveling, if you are gentle and careful. You can use very light pencil markings for the seams. The results are very good. Good luck!
Yes, I will change all the rigging. Replacing the sails is not a problem. I have good experience with material. But ... I wouldn't want to touch them because I really like their texture. It looks realistic and the lower sails cannot be inflated like that. It's a light breeze. I loved the pencil idea. Thanks for your comment. I will try to correct all complaints. In this video, the bad resolution is 720 only. The other will be in 4K and you can see it.
@@babenko100 If you redo the rigging, think of the braces of the mizzen mast. Because the're missing too. You got a comment about the color of the thread used. Indeed, a distinction is made between the running rigging (light color) and the standing rigging (dark color).
@@АлександрШевченко-ш7у Tak u Vas estj svoj kanal, prosto neoformlennyj. Zajdite v youtube. Prosto nazmite na svoj znachek A, i otkrojte " tvorcheskaja studija youtube", Daljshe po podskazkam, tam vse legko. U Vas vse poluchitsja.Dazhe esli ne xotite vykladyvatj video, mozhete vse ostavljatj na kanale i delitjsja ssylkami. Tozhe udobno.
Tryed putting this model together while sailing on the ore boats of the great Lakes , winter came before I was half done. Had to give it up ,it was years ago , Today I have a model of the Constitution.
Las "alas" y "rastreras" están mal colocadas, esas velas van extendidas hacia afuera y primero se extendían los botalones, antes de largar las velas, así que en esa posición nunca iban. En la imagen de tapa están en la posición correcta!
Hi, i Just bought that model and im going to make it but I dont kbow how wide is it, i know that length is almost 100cm and height is almost 6o but I dont know how wide it is, can you measure it for me?
Tochno ne pomnju. gde to 72 sm.v dlinnu i 24-26 v shirinu. ja v Londone pokupal. dolzhni bitj esche. modelj populjarnaja, no malo kto do konca sobiraet. (Revel. 1:96 Cutty Sark.na EBAY estj.)
Nice she’s beautiful. I just got my kit yesterday learning all I can. Just found out about EZ line and a few other things. Any tips would be highly appropriated. Did you use the line from the kit or is that something else?
Thanks for the feedback. Yes, I used EZ, wire, threads from a set. Some twisted with a drill and painted. There may be problems with the case. Use epoxy glue and bandage. Revel will not do! He will burst.
Sergej Babenko I have a question. Is there any way to sand down the bottom of the ships heel without damaging the detail? Or should I just go for it and level it. I’m trying to smooth out the edges and it seems impossible to hide without affecting the bottom
@@Will-216 Hi Doc. I do not quite understand what you want to grind. If you are talking about connecting parts, then yes, you have to grind a lot on one side and on the other you have to put putty on it, close up the gap. I'm talking about connecting the deck with the hull of the ship. Only in this way will you save any geometry of the ship. Casting parts ... you see for yourself.
Nice! I built this model when I was 15. It stayed in tact and survived a major earthquake. Unfortunately, I came home one day to see that our cats had destroyed it and made a toy out of it. I bought another one to build, and one day I will get to it. One question...why is the running rigging white? Or is it just the video?
Thank. I can imagine how much fun the cats were. I sympathize. The rigging is beige. Yes, the video is not of good quality. I got new video equipment. I'm planning to reshoot it. Thanks for the feedback.
Well done Sergej. I've got two of those kits in their boxes just behind me. How long did it take you to build it? For such an old kit, it still does the real ship justice.
Hi Doron Ron. nice to see first comment. Im spend more than 7 mounth for him. Thank you. Quality casting detals is no god. Its Revell. Need time for fix them.
Yes. Maybe. This is my first job. I am planning to redo it because the rating is good. Subscribe and you will be able to see the restored CattY Sark in 4K video and the best music soon.
I built this model in 1960 and still have it !
Great job! I would really love for some manufacturer to upgrade this kit and make it a really, turly outstanding model.
Outstanding job! I would have liked to seen more detail and not had the fade to next angle been so quick. Thank you for sharing. One of the nicest Revell kit builds of this ship that I have seen!
Thanks for the comment. This summer I will restore. I will make a new video with the restoration. I hope you will like it.
Built it 20 years ago while recovering from Back surgery! Not as impressive as this one but still beautiful!
I just don't understand how you get the patience or the time to do all that rigging and rope work! Incredible :)
I have dreamed of doing it since childhood.
Спасибо за ссылку
Ваша модель Катти Сарк лучшая
I dont can imagine how many hours it takes to build this one. Very impressiv !
Great work. I just bought this and an going to build it soon. Great inspiration.
Amazing work on this kit, very impressive 😎👍. would love to build this kit one day.
CONGRATS ON A NICE BUILD ,, SHE LOOKS GREAT ,, CUTTY SARK IS MY NEXT BUILD ,, IN THE MIDDLE OF THE HELLER HMS VICTORY KIT AT PRESENT WHICH IS A MAJOR TASK , HAVENT DONE A REVELL KIT IN A LOOONG TIME ,, BUT SHE LOOKS THE BUISNESS :))
I built one of them back in the 70’s . My mom knocked it off the shelf while dusting. I cried for a month
I still have 3 Revell cutty sharks from the early 60s just about to start one, getting needed stuff 1st !
Sehr sauber gebautes Modell. Mein Glückwunsch dazu.....
Que bellesa esta muy bonito saludos desde
Honduras
Beautiful! How did you get the fore and aft staysails to be at that angle?
Thank you. This is a white painted wire.
Nice build...well done.
Dobra robota. Ładny model, pogratulować.
Majstorski ! 😮
Great model work! Congratulations and I’m inspired.
Thanks for the feedback. Very nice.
Great work 👍👍👍👍
Nicely done ! 10 out of 10 for patience.
Fantastic
Que bonito tengo uno lo compre en una tienda de segunda en california
Nice one! I’m busy doing the same model!
Several suggestions. You put a lot of good work into this model. I'd have replaced the plastic sails with very fine silk or linen cloth. Then, I'd have removed the preformed deadeyes and installed wood ones, with proper lines. And, not used the plastic ratlines. One final note. The lashings on the yardarms should be black, not white.
Thanks for the comments. It's in time.
I am going to restore this model. I have a lot of mistakes. I will correct them. Not so long ago I shot a video of the original clipper from a camera and a drone. ua-cam.com/video/OVV88ToOkWs/v-deo.html Hope it helps.
Sergej Babenko Hi. Redoing the deadeyes will be a very challenging job. Very challenging, indeed. I guarantee that she will look much, much better. Putting real shrouds with ratlines will be another challenge, but again she will look much better. Since you are going to restore the model, you should take off all the running rigging as well, or making the ratlines will be quite difficult. am finishing a big wood Constitution and put cloth sails, and they look good. For the edges of the sails, don't try to fold and hem them with sewing. Use a laundry iron to iron on a special thin transparent tape on the edge of the sail without folding the edge of the sail. Any fabric store will know about this product. You cut the sail cloth without the cloth unraveling, if you are gentle and careful. You can use very light pencil markings for the seams. The results are very good. Good luck!
Yes, I will change all the rigging. Replacing the sails is not a problem. I have good experience with material. But ... I wouldn't want to touch them because I really like their texture. It looks realistic and the lower sails cannot be inflated like that. It's a light breeze. I loved the pencil idea. Thanks for your comment. I will try to correct all complaints. In this video, the bad resolution is 720 only. The other will be in 4K and you can see it.
@@babenko100 If you redo the rigging, think of the braces of the mizzen mast. Because the're missing too. You got a comment about the color of the thread used. Indeed, a distinction is made between the running rigging (light color) and the standing rigging (dark color).
@@MJMC57 Thank you. I'm working on this. I'll finish it soon.
ОТЛИЧНАЯ РАБОТА!!!Я СВОЙ ДЕЛАЛ С 05 2018 ПО 01 09 2019 ПРАВДА УСЛОВИЙ НИКАКИХ
Spasibo boljshoe. Xotelosj by vashu rabotu uvidetj.
@@babenko100 НЕ ПОВЕРИШЬ НЕ ЗНАЮ КАК СБРОСИТЬ ФОТКИ. УЗНАЮ-СБРОШУ!
@@АлександрШевченко-ш7у Tak u Vas estj
svoj kanal, prosto neoformlennyj. Zajdite v youtube. Prosto nazmite na svoj znachek A, i otkrojte " tvorcheskaja studija youtube", Daljshe po podskazkam, tam vse legko. U Vas vse poluchitsja.Dazhe esli ne xotite vykladyvatj video, mozhete vse ostavljatj na kanale i delitjsja ssylkami. Tozhe udobno.
VERY WELL DONE!!!
Très belle réalisation
Thanks.
Is WILL DONE many improvements needed!
Tryed putting this model together while sailing on the ore boats of the great Lakes , winter came before I was half done.
Had to give it up ,it was years ago ,
Today I have a model of the Constitution.
I also built for 8 months. I hope you will succeed.
@@babenko100 ...переходи на дерево. Пластик - это детские забавы. Написал на почту.
Las "alas" y "rastreras" están mal colocadas, esas velas van extendidas hacia afuera y primero se extendían los botalones, antes de largar las velas, así que en esa posición nunca iban. En la imagen de tapa están en la posición correcta!
Красота
Hi, i Just bought that model and im going to make it but I dont kbow how wide is it, i know that length is almost 100cm and height is almost 6o but I dont know how wide it is, can you measure it for me?
The widest point is the bottom yard on the mast. Depending on the build. I got 21.3 cm. Rhea consists of three parts.
А какой размер модели и есть ли она щас в продаже?
Tochno ne pomnju. gde to 72 sm.v dlinnu i 24-26 v shirinu. ja v Londone pokupal. dolzhni bitj esche. modelj populjarnaja, no malo kto do konca sobiraet. (Revel. 1:96 Cutty Sark.na EBAY estj.)
Quisiera comprar el Barco soy de Bolivia y mi idioma es en español
Классно
Nice she’s beautiful. I just got my kit yesterday learning all I can. Just found out about EZ line and a few other things. Any tips would be highly appropriated. Did you use the line from the kit or is that something else?
Thanks for the feedback. Yes, I used EZ, wire, threads from a set. Some twisted with a drill and painted. There may be problems with the case. Use epoxy glue and bandage. Revel will not do! He will burst.
Sergej Babenko thank you.
Sergej Babenko I have a question. Is there any way to sand down the bottom of the ships heel without damaging the detail? Or should I just go for it and level it. I’m trying to smooth out the edges and it seems impossible to hide without affecting the bottom
@@Will-216 Hi Doc. I do not quite understand what you want to grind. If you are talking about connecting parts, then yes, you have to grind a lot on one side and on the other you have to put putty on it, close up the gap. I'm talking about connecting the deck with the hull of the ship. Only in this way will you save any geometry of the ship. Casting parts ... you see for yourself.
@@babenko100 it’s been two years… a lot has happened… I love coming back and looking at your creation. I’m rigging the sails now.
Она из пластика? Или одно дерево?
Eto plastik. Nekotorye detali- derevo, metal, fototravlenie...
And no sorry not any one for sale 😀
Nice! I built this model when I was 15. It stayed in tact and survived a major earthquake. Unfortunately, I came home one day to see that our cats had destroyed it and made a toy out of it. I bought another one to build, and one day I will get to it. One question...why is the running rigging white? Or is it just the video?
Thank. I can imagine how much fun the cats were. I sympathize. The rigging is beige. Yes, the video is not of good quality. I got new video equipment. I'm planning to reshoot it. Thanks for the feedback.
Well done Sergej. I've got two of those kits in their boxes just behind me. How long did it take you to build it? For such an old kit, it still does the real ship justice.
Hi Doron Ron. nice to see first comment. Im spend more than 7 mounth for him. Thank you. Quality casting detals is no god. Its Revell. Need time for fix them.
Flippin' eck.....Is the music really necessary?
I composed the music myself, played it, and records it. Thanks for the comment.
@@babenko100 Sergej,The music is great I just felt personally it wasnt right for the vid...no offence.
Yes. Maybe. This is my first job. I am planning to redo it because the rating is good. Subscribe and you will be able to see the restored CattY Sark in 4K video and the best music soon.
Should have added that the model is superb..well done.
Many colors were not right ..........................................
Those plastic sails are an abomination! Get rid of them! Use real deadeyes for the shrouds! Re-rig her.
Welcher Idiot drückt dislike...