Connect ANY IP Camera, Video Device into your Hikvision NVR Plug & play Onvif & RTSP Virtual Host

Поділитися
Вставка
  • Опубліковано 16 січ 2025

КОМЕНТАРІ • 81

  • @NiNjaTurtLe697
    @NiNjaTurtLe697 2 роки тому +1

    very very very helpful, thank you. I'll try to add my foscam soon.

  • @damindakankanamalage372
    @damindakankanamalage372 3 роки тому

    Thank you . I was looking for this Information .

  • @engenhocasdegaragem5896
    @engenhocasdegaragem5896 Рік тому

    What a nice! Do you know witch Hikvision NVR can support RSTP?

  • @Expressclean1
    @Expressclean1 Рік тому

    I have a hikvision IP camera on a zkteco NVR and POE switch. I have been finding it difficult to get the camera online. Could you assist me ?

  • @wyattoutlaw2370
    @wyattoutlaw2370 3 роки тому +1

    Anyone know if hanwha cameras have onvif or must you use rtsp?

    • @securityguru407
      @securityguru407  3 роки тому +1

      Hanwha is samsung which should have ONVIF unless its a super old camera. I dont think Hanwha has been out for that long for it to only have RSTP

  • @josephmcnamee1132
    @josephmcnamee1132 3 роки тому +1

    Gosh ive been trying to get this going for days now i could cry.

  • @engenhocasdegaragem5896
    @engenhocasdegaragem5896 Рік тому

    Also, my mother’s house has a IP camera that supports RSTP (she has a public IP address). can this NVR open my mother’s house camera? the NVR will be installed at my house, I want to bring the video over the internet. Also I will have some cameras in my house, but I can use Onvif.

  • @matthampson1466
    @matthampson1466 9 місяців тому

    I have a Hikvision DS-7608NXI-I2 / 8P/S NVR with 8 POE channels, 4 of these are being used by Colorvu IP cameras. I want to add an Akuvox E18c door intercom system which is ONVIF compatible, it is powered by POE, can I plug it straight into one of the 4 spare POE's on the back of my NVR and configure it to work as in the instructions in your video?

  • @hendrysumaswanto4567
    @hendrysumaswanto4567 2 роки тому

    Have you tried the wyze v3 rtsp function?

    • @securityguru407
      @securityguru407  2 роки тому

      Yes it works but you need to update the firmware with RTSP compatibility.

  • @paatiling
    @paatiling 4 роки тому

    Hi there thanks for all the helpful vids. can you help with or is there a way to view a dahua nvr 4 Chanel system on the hik connect app I'm having trouble getting tbe gdmss app to work on a hisense smart TV

    • @securityguru407
      @securityguru407  4 роки тому

      GDMSS is for a Dahua DVR or NVR you need to you IVMS-4500 if you have Hikvision or OEM Hikvision

  • @elkwise1
    @elkwise1 Рік тому

    I am trying to add a Ubiquiti G4 to Hikvision 7108 getting an error on the network test. The ubiquit is connected to a ubiquiti 8 port poe switch and the wan port of the nvr is connected to the same switch. NVR is not detecting camera stream

    • @elkwise1
      @elkwise1 Рік тому

      Also trying to add a Toshiba IK-WB16A to NVR

  • @shawnphillips1220
    @shawnphillips1220 3 роки тому

    Any ideas why I can add an IP camera by onvif to my first nvr but can't add it to a second NVR on the same network for a dual recording with the exact same set up and camera configurations that worked for the 1st NVR?

  • @michael_andretti93
    @michael_andretti93 3 роки тому

    Hello, i have a plan to install 4 pcs Hikvision Ipcam (2cd1121) in my office and i want to connect one of the ipcam to 4 different NVR. Is that possible?

    • @securityguru407
      @securityguru407  3 роки тому

      Yes, this should not be a problem. As long as your NVR is onvif compatible which is the generic IP protocol.

  • @McLunaX
    @McLunaX 3 роки тому

    i can put ip camera LOREX 4K into Hikvision NVR 1080p?

    • @securityguru407
      @securityguru407  2 роки тому

      Yes, but you will have to login into the Lorex camera change the resolution to 1920 x 1080 before you add it as ONVIF. The NVR will not read it if it is set to 4K, unless your NVR is a 4K NVR

  • @kirkgrey3146
    @kirkgrey3146 3 роки тому

    Hello @SecurityGuru, can you tell me what model NVR that is. I have two colorvu hikvision camera, 1 Amcrest and will be adding more cameras. I like using different cameras for different applications. Also if you can recommend a nvr that doesn't require a lot of bandwidth, I need that one for my food truck. Thank you

    • @securityguru407
      @securityguru407  3 роки тому

      This one was a 32ch IPS-32NVR16P, I doubt you would need this for your food truck. lol Go to our sponsor's website www.ipsecuritycctv.com/ Basically any of their NVRs are good since the main PoE is built in you wont use any internet bandwidth and if you do watch in remotely in the future the app can be set to stream in super low bandwidth. Quality will be less remotely but it wont affect the recording resolution. Perfect for monitoring your business that has limited bandwidth. I can also help you with the setup and such. Say you came from SecurityGuru for some discounts. Thank you!

  • @voltronLion1
    @voltronLion1 3 роки тому

    Hi, on the 3rd options does my ip camera have to be plug in via router or external POE switch or it can be plug-in directly to my NVR? Thanks and great video!

    • @securityguru407
      @securityguru407  3 роки тому

      It has to be outside the built in PoE. Then you have to custom do custom protocol.

    • @voltronLion1
      @voltronLion1 3 роки тому

      @@securityguru407 OK thanks for the tip!

  • @HedroomMax
    @HedroomMax Рік тому

    Is it possible for a HikVision NVR to capture events from an XMEYE ONVIF camera?
    I've been trying for two weeks now, and I can only see the video streams!
    ONVIF 2.0 Port 8899 ;
    RTSP Port 554 ;
    HTTP Port 80;
    Media Port 34567
    Please help!

    • @securityguru407
      @securityguru407  Рік тому +1

      That shouldn't be a problem you guys have to add it as ONVIF port: 8899 and put the user name and password. Make the port none plug and play, to be able to enter these information. If you need remote support we do offer it. Please visit: securitycameratechsupport.com/ and give us a call or schedule a call. Thank you!

  • @mikealonge7388
    @mikealonge7388 4 роки тому

    Great. I have a question. Pls how can I link a camera that does not have english language.

    • @securityguru407
      @securityguru407  4 роки тому

      Language dont really matter as long as you know the IP address RTSP string or Ovif port and the password.

  • @tonicop8729
    @tonicop8729 3 роки тому

    does xiaomi hualai dual lens has onvif ? if it doesn't have. what its rstp ? thanks.

    • @securityguru407
      @securityguru407  3 роки тому

      What is the model exact of your camera. I can check for you.

  • @yudimagnipratama5950
    @yudimagnipratama5950 2 роки тому

    I want to ask about the nvr I have Hikvision
    iDS-7732NXI-I4 / X and the camera I use Milesight MS-C5372-FPB of course this is a different brand, I want to use the protocol but I don't want to use the onvif protocol, can you help me to provide the Milesight url . thank you

    • @securityguru407
      @securityguru407  2 роки тому

      I noticed your camera is a motorized camera. You can use the RTSP string for the video and if it has audio, but you wont be able to control the lens of the camera. It's kinda a waste. But if you want to still try it via RTSP here is the RTSP string for that camera.
      rtsp://username:password@IP:554/main

  • @bryan7993
    @bryan7993 3 роки тому

    hi, i just got hikvision nvr, i have 5 toshiba ip cam devices, is there anyway to check the model number? i have access to the cam remotely, but cant seem to find the model number and find the rtsp. They all say Version: 0100c . please help, thanks

    • @bryan7993
      @bryan7993 3 роки тому

      i have a panasonic BL-C1A too

    • @securityguru407
      @securityguru407  3 роки тому

      It should be in the same area for the model that version is probably is the firmware.

  • @siricepick
    @siricepick 3 роки тому

    I've been trying to add an Amcrest IP5M-B1186EW-28MM to my Hikvision NVR. I've tried everything I'm aware of and have read a few sites where many have not had any luck. I've tried different ports, and protocols, but the camera won't connect. I haven't tried RTSP yet, but I'm trying to avoid it. Any thoughts?

    • @securityguru407
      @securityguru407  3 роки тому +1

      When you put Onvif are you using port 80?

    • @siricepick
      @siricepick 3 роки тому

      @@securityguru407 Yes, sir. I've tried to change ports in the camera itself to 80 as well, but nada.

    • @securityguru407
      @securityguru407  3 роки тому +1

      @@siricepick Hmmm weird, then there is no choice but to run RTSP on it. I know that this camera does have ONVIF capabilities and obviously the NVR does as well. Just to confirm that the camera does have ONVIF as well as possibly see which port it is using download this scanner. sourceforge.net/projects/onvifdm/
      If it doesnt scan that means it doesnt have ONVIF support or its turned off.

    • @siricepick
      @siricepick 3 роки тому

      Thanks! I'll run the tool and report back.

  • @ALIDIY007
    @ALIDIY007 4 роки тому

    Hey brother I have hikvision nvr 8 channel and seven poe camera i try using a netgear unmanage poe switch but when I plug two or more cameras to the poe switch my nvr is only displaying one cameras on screen please help how do I go about and configure this???

    • @jarmizee
      @jarmizee 4 роки тому

      Hello, you cannot put a switch into the PoE swtich. The only way to get multiple cameras from the external PoE switch would be plugging the NVR's Lan into that switch. The PoE switch built in can only support 1 camera per port.

    • @Pro1er
      @Pro1er 3 роки тому

      You need to manually assign the camera's IP address for each camera running through the Netgear switch, just make sure none of the cameras on the NVR is not already using the same IP address you plan to assign.

  • @anthonyr640
    @anthonyr640 4 роки тому

    Hello. Thanks for your videos.
    How do I go about hooking up an ONVIF Wifi IP camera to a HikVision NVR? (It's not in the automatically supported list of camera makers)
    I can set the camera up wired, but the far corner of my yard needs to be wireless. DS-7616NI-K2/16P
    Thanks

    • @jarmizee
      @jarmizee 4 роки тому +2

      Hi, you just need to scan the cameras with a ONVIF camera scanner get the IP address, then add it into camera management within the NVR.

    • @anthonyr640
      @anthonyr640 4 роки тому

      @@jarmizee Thanks

  • @isnhart
    @isnhart 3 роки тому

    does this work on any hikvision nvr?

    • @securityguru407
      @securityguru407  3 роки тому

      Yes it does. Actually majority of the DVRs, NVRs in the market will support this RTSP method.

  • @sukhjeetsinghbains741
    @sukhjeetsinghbains741 2 роки тому

    how to add axis camera to hikvision nvr

    • @securityguru407
      @securityguru407  2 роки тому

      Axis has ONVIF so you can follow the onvif steps on the video then it should go through.

  • @tobiejansenvanrensburg826
    @tobiejansenvanrensburg826 3 роки тому

    Hi
    Can one add an Onvif supported WIFI Camera to a Hikvision DVR?

    • @securityguru407
      @securityguru407  3 роки тому

      Yes you can. You just need to know its local IP address and you can follow option 2 in the video.

  • @sergefontaine3560
    @sergefontaine3560 4 роки тому

    Hi I have an Ip camera compatible Hikvision that works well with IVMS 4200, but I can't watch with wifi and remotely with IVMS 4500 on my phone, I 've got the error "hcnetsdk error 424 "with IVMS 4500. And i dont have an NVR. How can i fix it .Can you help me .Thanks a lot.

    • @securityguru407
      @securityguru407  4 роки тому

      Did you check your RTSP port? What is the model of your camera? Sometimes your camera firmware might be outdated. Let me know the model / firmware version of your camera.

    • @sergefontaine3560
      @sergefontaine3560 4 роки тому

      @@securityguru407 Hi, the RTSP port is correct(554),the model is HD Infrared Camera and here the only infos that i found for this ip camera.
      Kernel Version : Linux 3.18.30 #20 PREEMPT Wed Jan 15 12:27:54 CST 2020 armv7l
      File System Version : PG2255I_V0_BU V5.8.0_200501 build 2020-07-10 15:57:21 Thanks

    • @securityguru407
      @securityguru407  4 роки тому

      @@sergefontaine3560 This firmware looks like a Hikvision compatible camera but not Hikvision or OEM Hikvision. Tho it will work plug in play with the NVR / potentially IVMS-4200 which opperates differently than 4500, this is the reason why it is not working. Try to change the compression from h.264 or vise versa to h.265. other than that the codec might be different.

  • @kelvinadeline1285
    @kelvinadeline1285 3 роки тому

    How can i have the rtsp for ezviz c6cn?

    • @securityguru407
      @securityguru407  3 роки тому

      rtsp://admin: device verification code@device IP address on the LAN :554/H.264 try this, make sure there are no spaces in between the information of your cameras

  • @jchongkoon
    @jchongkoon 3 роки тому

    English:
    I've been trying to connect my Ubiquiti G3 Bullet cameras to my Hikvision NVR and no results.
    They didn't work, I tried several times for RTSP and nothing
    Español:
    Estuve tratando de conectar mis camaras G3 Bullet de Ubiquiti a mi NVR de Hikvision y no logre resultados.
    No funcionaron, intente varias veces por RTSP y nada

    • @securityguru407
      @securityguru407  3 роки тому

      Did you go to the camera menu and made sure the mode is set to "standalone"? You need to set it on that for the RTSP to work.

    • @securityguru407
      @securityguru407  3 роки тому

      Also just to confirm the RTSP url for Ubiquiti is rtsp://xxx.xxx.xxx.xxx:554/s0 . You can test it to make sure that it is working via VLC as well, because you try to get it into the NVR. Let us know the result to help the community in the future. =)

  • @macipalika
    @macipalika 2 роки тому

    The Chinese camera has been connected but does not detect movement so recording does not start.

    • @securityguru407
      @securityguru407  2 роки тому

      Yes this is a problem with the different onvif version on the camera vs the NVR. There is a work around but its not 100%. You can log into the camera directly and turn on motion on the camera itself. Try that it works 70% of the time.

    • @macipalika
      @macipalika 2 роки тому

      @@securityguru407 The camera itself works well and records motion to an sd card. I think the camera should have its own protocol, but it doesn't.

    • @securityguru407
      @securityguru407  2 роки тому

      @@macipalika Log into the camera directly you should see motion or event there. I have yet to see a camera that doesnt have this.

    • @macipalika
      @macipalika 2 роки тому

      @@securityguru407 It has it and works when recording to an sd card. The hikvision NVR does not detect motion. It is not possible to set anything on the camera in the NVR, only the PTZ control works

  • @nihadhassan4112
    @nihadhassan4112 2 роки тому

    Does someone know American Dynamics camera IP address would be? or how to connect to hikvision nvr?

  • @rome7247
    @rome7247 3 роки тому

    How to connect in encoder

  • @jchongkoon
    @jchongkoon 3 роки тому +1

    English:
    I'm trying to connect my Ubiquiti G3 Bullet camera to my Hikvision NVR via RSTP and it won't go online.
    I appreciate your help to see if I can activate it, thank you.
    Español:
    Estoy tratando de conectar mi camara Ubiquiti G3 Bullet a mi NVR Hikvision por medio de RSTP y no se pone en linea.
    Te agradezco que me de una ayuda para ver si puedo activarla, gracias.

  • @haseebbaig277
    @haseebbaig277 3 роки тому

    i want to add an ip camera which is free publicly available to my hikvision nvr 7100 recently i added successfully but deleted later, now i want to add another camera but i forgot how i managed to add firstly

    • @securityguru407
      @securityguru407  3 роки тому

      what type of camera are you speaking of? Did you make sure that the IP address is still correct / user name and password?

  • @lifebarier
    @lifebarier 10 місяців тому

    How to make onvif motion events work with hikvision nvr ?

  • @abiolaseye803
    @abiolaseye803 2 роки тому

    Can I use a vivotek,di-link and hikvision ip camera on same NVR?

    • @securityguru407
      @securityguru407  2 роки тому

      Yes as long as the cameras and the NVR supports ONVIF protocol. I would say if the cameras are within 5 years old you should be fine older than that you may have to use RTSP if it has it.