Great work! Tbh, the bike was already looking really nice. I like people restoring/customization bikes that look like they have been neglected or abused. Such transformations are much more inspiring to me.
superb work and very nice line on this bike! with a splendid rear, bravo for the exhaust pipes! giving a second life to a shadow always remains a dream...there! it is done in a beautiful way
Beautiful bike! I’m in the market for one so I’ve been looking around lately. It’s either this or a Yamaha vstar. The bobber builds are just beautiful bikes all around.
I am in the process of building a bobber now out of a 2000 shadow. If you do t mind me asking what did you use to cover the frame under the seat were you made the cuts
Very nice build, would you be okay with sharing your design for your seat, length of cut on frame and design for your fabricated seat bung mounts, appreciate your help. 11:56
Great improvement! I have to say that the VT is up there with the Virago for having the ugliest frames on bikes that you would normally want to be on show.
Très beau boulot. Un GD bravo😊 comment avez vous résolu le pb du vase d'expansion dont le tuyau de remplissage gêne pour placer la batterie a cet endroit?
this is awesome! I want to do the same as you did relocating the electronics lower. Any tips you found along the way? I'll likely be replacing with a smaller battery as well.
Hey I just got a vt600 shadow and I have a question, where the frame was cut it hits the fork and they dent each other, i don’t know why, I mean these are stock parts I think there should be some sort of end stop when the shock also is fully compressed and the frame should have a minimum of clearance. If you have an email to give me I’d like to send you some pic to make you understand better. Thanks
I didn't like the end result, a vehicle in which I can't ride with my wife is something inconceivable to me. The fenders were very close to the wheels, but the color was beautiful and the exhaust pipes were also beautiful, certainly. Anyway, congratulations on the work. ✌
Vraiment belle !! Petite question, je compte faire des modifications sur une virago, avez vous souvent a faire a des contrôles/amendes concernent la plaque d'immatriculation noir et les rétroviseurs embouts de guidon qui sont pas homologué je suppose ? Merci beaucoup
Pour la plaque en noir j'ai pris un petit risque les effecitvement se n'est pas homologuer je me suis deja fait arreter une fois j'ai juste pris un avertissement pour me dire de changer la plaque....sinon c'est 90€ d'amande donc si vous ne voulez pas etre embeter rester sur une plaque standart....pour les retroviseur par contre pas de soucis j'ai posée directement la question au gendarme quand il m'on arreter et pas de soucis de se coter il m'on affirmer que j'avais le droit de les mettres
Para mí gusto le faltó alguna tapa lateral, así no se ven los cables y la batería. Luego unos escapes más cómodos a la hora de conducir y que no se vean las soldaduras. Y por último en vez de hacer publicidad a una marca de whisky pondría otra cosa o directamente nada
Nice but only cut down rear fender added a springer seat, new pipes, probably rejet carb and paint. If you do a complete teardown make it a Lil more "custom". But I don't know your budget.
@@Arthur-osama i have a Kawasaki Vulcan 800 Well my VN is at mechanic for like a month now, should be done next week FINALLY Till i get it back a friend borrowed me his Sym Husky 125 😂 so slow,a scooter basically 🛵💨 but better than nothing :P
Ahahaha been 2 months and I'm still a pedestrian İt was the starter clutch the problem after all İ HOPE Had to order it from Japan... could not find it here in Romania Ordered it 2 weeks ago should arrive this week and hopefully next week i get on my bike İ rly need it in June for a couple bike fests
@@Arthur-osama yes I wouldn't mind doing that to get the look! I've got a buddy here in Texas that's gonna do it so I'm referencing your video to him ! Great context! Is there a specific carb kit you used ?
Great work! Tbh, the bike was already looking really nice. I like people restoring/customization bikes that look like they have been neglected or abused. Such transformations are much more inspiring to me.
superb work and very nice line on this bike! with a splendid rear, bravo for the exhaust pipes! giving a second life to a shadow always remains a dream...there! it is done in a beautiful way
Thank you so much for yout comment ! I'm glad you like this restoration 🙏🙏😁😁😁😁
That sound is awesome.
Killer work! The exhaust sounds as good as it looks!😎👍
Thank you my friend 🙏🙏😁😁
Beautiful bike! I’m in the market for one so I’ve been looking around lately. It’s either this or a Yamaha vstar. The bobber builds are just beautiful bikes all around.
Gorgeous bike, love the exhaust. Looks like you were able to do it all pretty quickly too
Thank you kris for your comment 🙏,i finished this bike in 4 months 😁👍
love how you put the rear fenfer great job beatiful bike
Thank you my friend 😁😁🙏🙏
I am in the process of building a bobber now out of a 2000 shadow. If you do t mind me asking what did you use to cover the frame under the seat were you made the cuts
super clean, great work
love the color, it looks incredible
Looks great. I like everything except the stock air box.
Very nice build, would you be okay with sharing your design for your seat, length of cut on frame and design for your fabricated seat bung mounts, appreciate your help. 11:56
Hell of a job!!! These hondas make some nice bobbers
Thank you 😊😊yes honda bikes is good for make bobers 😁😁
Right 👍 on man.awesome bike cool music in the back ground
Bike looks beautiful. Great work!
Looks nice and sounds awesome
Thank you 😁😁😁🙏🙏🙏
Superb job. Inspirational.
Thank you 🙏🙏
Looks
Amazing
Great improvement! I have to say that the VT is up there with the Virago for having the ugliest frames on bikes that you would normally want to be on show.
She's a beauty. Good work.
Thank you 🤩🤩🤩
looks good sounds even better
Très beau boulot. Un GD bravo😊 comment avez vous résolu le pb du vase d'expansion dont le tuyau de remplissage gêne pour placer la batterie a cet endroit?
Beautiful 👏✌️
Awesome job!
Thank you so much 💪💪
Super sweet 😮
wrap those pipes cus they melt the boots
Wow incredible job!
You you cut off the rear fender mount and it seemed as if you put something back them under the seat area what is it?
Wicked finish 🔥 quick ride would be nice tho
Félicitation y'a pas a dire c'est vraiment une restauration ULTIMATE ( subaru un jour subaru toujours )
Merci skynet sa fait plaisir 😁😁😁
Exhaust note sounds great 👍
Thank you 😁😁😁
Ein Traum, habe mich verliebt in ihr..❤🤪🤪🤪🤪🤪🤪😄
Did you can spray or use a auto sprayer to paint frame ?
superrrrr motor❤
Stunning 👍
Pfouahhhhhhhh magnifique travail !!!!!!
Merci beaucoup ! 😁😁
I'm getting ready to do a similar build, when you went with open exhaust pipes did you have to reset the carburetors ?
I'm a Harley rider I build bobbers out of them but this bike is cool nice job I have seen some cool metric chops and bobbers 👍
How much cost a rework like this? If i buy an old model at 3500 € how much im gonna spend for a customisation like this?
Mhhhh i think 2000€ to 2500€ for the transformation....for exemple the exhaust cost 700€ de painting job 500€ new tire 300€..... 😅😅
this is awesome! I want to do the same as you did relocating the electronics lower. Any tips you found along the way? I'll likely be replacing with a smaller battery as well.
Beautiful, great job!
any idea what size jets you used with the drag pipe set up? cheers
Linda. Cual es el modelo del caucho o llanta trasera por favor?
Awsome!
Hey I just got a vt600 shadow and I have a question, where the frame was cut it hits the fork and they dent each other, i don’t know why, I mean these are stock parts I think there should be some sort of end stop when the shock also is fully compressed and the frame should have a minimum of clearance. If you have an email to give me I’d like to send you some pic to make you understand better. Thanks
Красавчик
Where do you get the fenders/ tanks from
Nice bro..👌👌👍
Thank you bro 🙏🙏💥💥
great job. sounds fantastic!!!👍🤙 thank you for this 15 minutes.
Keep strong bro ❤❤❤
nice work man
Thank you so much 🙏😁
Nice 😎😎
beautiful sound
Nice
Combien coûte la fabrication d’une de ces machines ?
Great job looking awesome bud, could I ask what risers and bar you used
tres bien! very nice, color looks amazing.
Merci beaucoup 😁😁
Superp bro i like it
Super taff, rien à dire une bête maintenant.
Merci beaucoup sa fait super plaisir 😁😁
That sound👌👌
1 funky bike 🥳
Thank you 😍
I didn't like the end result, a vehicle in which I can't ride with my wife is something inconceivable to me. The fenders were very close to the wheels, but the color was beautiful and the exhaust pipes were also beautiful, certainly. Anyway, congratulations on the work. ✌
Nice!👍😎
Vraiment belle !! Petite question, je compte faire des modifications sur une virago, avez vous souvent a faire a des contrôles/amendes concernent la plaque d'immatriculation noir et les rétroviseurs embouts de guidon qui sont pas homologué je suppose ? Merci beaucoup
Pour la plaque en noir j'ai pris un petit risque les effecitvement se n'est pas homologuer je me suis deja fait arreter une fois j'ai juste pris un avertissement pour me dire de changer la plaque....sinon c'est 90€ d'amande donc si vous ne voulez pas etre embeter rester sur une plaque standart....pour les retroviseur par contre pas de soucis j'ai posée directement la question au gendarme quand il m'on arreter et pas de soucis de se coter il m'on affirmer que j'avais le droit de les mettres
@@Arthur-osama niquel alors merci pour votre réponse aussi rapide aha 😁
Show 👋👋👋👋👋
Para mí gusto le faltó alguna tapa lateral, así no se ven los cables y la batería. Luego unos escapes más cómodos a la hora de conducir y que no se vean las soldaduras. Y por último en vez de hacer publicidad a una marca de whisky pondría otra cosa o directamente nada
Nice but only cut down rear fender added a springer seat, new pipes, probably rejet carb and paint. If you do a complete teardown make it a Lil more "custom". But I don't know your budget.
😮 AMAZING 👏🏻 💚
Good job,i don't like bobbers but looks sick 👌🏻
Thank you my friend your comment makes me happy 🙏🙏😁😁
@@Arthur-osama i have a Kawasaki Vulcan 800
Well my VN is at mechanic for like a month now, should be done next week FINALLY
Till i get it back a friend borrowed me his Sym Husky 125 😂 so slow,a scooter basically 🛵💨 but better than nothing :P
Ahahaha been 2 months and I'm still a pedestrian
İt was the starter clutch the problem after all İ HOPE
Had to order it from Japan... could not find it here in Romania
Ordered it 2 weeks ago should arrive this week and hopefully next week i get on my bike
İ rly need it in June for a couple bike fests
WOW!
Stock handle bars or aftermarket? If latter, which are they ?
Very nice build and video! Did you make any changes to the carb? Like jetting it?
Thank you ! Yes little jetting upgrade like 5 points
did/does honda make a bigger displacement version of this bike?
They did a 750 and an 1100 if I remember correctly. The VT600 was my first bike back in the 90's.
kool, whats the length od yr petrol tank
Trop belle ❤❤❤❤
Merci beaucoup 😁😁😁
What rear fender is that brother?
Nice work ,the only thing thats going to spoil it is number plate
Kirrály !! (king !)
It sounds great, but it would look a lot better with a solid chrome exhaust.
Odd question but can u send me a list of all the parts you used I’m in the process of the exact same build
Nice Bike Fantastic Color.. Can u please tell the code of color to find it for my bike?
Yes the color is "isle of man green" ans the color code is C4G ;)
@@Arthur-osama thanks a lot my friend!! 🙏
What kind of bracket did you add to the frame where you cut the rear fender support? Excellent job.
I put a reinforcement tube for the frame, and integrated screws to fix the saddle
Thank you 🙏😊
Luv the exhaust! Can you share info about it ?
Tape "ice exhaust" on google ;)
In my heart and mind I would love make my Steed rear fender just like this, but unfortunately will not work on our wet road. 😭
The iron has become hot!
Hi man where did you get the back fender ?
Hii ! On TJ brutal customs website ;)
do you mind putting the link from where you got those exhaust ???
I have write the link on the description video ;)
Muy buen trabajo 👍👍
Thank you 🫶🫶
SUPERBE ...
Where is your shop !!! Got an 88 600 i wanna get done like that !!
Sorry my shop is in france 😅😅 would you cut the rear subframe ?
@@Arthur-osama yes I wouldn't mind doing that to get the look! I've got a buddy here in Texas that's gonna do it so I'm referencing your video to him ! Great context! Is there a specific carb kit you used ?
Ajusta las válvulas 💥💥💥💥
I have bad jetting setup on the video 😅😅
Тот случай, когда было лучше, чем стало....
Nice!!! What name the color green please???
Its a bmw color the name is green island ;)
hey first awesome project! but I'm just wondering how much money you've invested because I'm considering doing something like this myself
Thank you so much ! Im think arround 1500 $ 🤔
Where can I get this exhaust setup !!?
The exhaust come from poland go on google and tape "ice exhaust" ;)
just no words ahaha👌
Thank you 🙏🙏😁😁
@@Arthur-osama tchau
Looks lovely but, Do you not burn your legs on the exhaust?
No probleme with the exhaust and legs 😁😁
what color paint is that?
Its a bmw color the green island
gostei ficou mais bonita😎
❤️
geil