Hey Claire, I saw a post where your name was used in a review for i think it was Resineers (see Daniel Coopers community post) about an air filter with a Heppa filter. They used not only your name and review but also Daniel Coopers and one other resin artist on UA-cam named Steve or Steven McDonald (sorry I don’t remember the name) so many apologies to the third person. Anywho if you didn’t try and review this product you need to say something I have never heard you mention this air purifier nor have you shown this product so please let them know how wrong this is and let us know if you were wronged!! Just looking out for you.
@jennifercriss1897 heyyyyyyy Jennifer ... you are a star thank you... I was chatting to Daniel about this yesterday when he discovered it .. I do not believe my name was used. I believe it to be Steve and Pouring your heart out ... however it is utterly shocking as the machine isn't even available to anyone at this stage. I will double check this for sure to see if I was mentioned. Thank you xxx ❤️❤️❤️❤️
I love how you still show stuff that’s gone winky wonky! Makes us all feel like if ours go wrong then we aren’t alone, especially if someone as talented as you gets it wrong too lovely xx
3:38 If you got a square washing up bowl & filled it up an inch or two deeper than the moulds deepest depth with some sand (rice may work) & push the moulds into them. Use a spirit level to insure that they are all level. It will also support the moulds shape from below.
I have loads of these moulds, from my mixed media obsession, I can see lots of fun ahead, have used them with resin but never thought about using with silicone, thanks Claire ❤❤
You don't have to apologize to us the most important thing is your still here and your in the process of healing yourself and that is more important than any videos up don't upload and when your ready to come back or decide not to we all understand and still love you ❤️ I 100% understand what your saying I have pretty bad depression, anxiety, panic attacks and have agoraphobia but I have slowly learnt I need to put me first so PLEASE don't worry about us just concentrate on you and get yourself better. Take care sending you a big hug and all my positive vibes 🩵🩵🩵🩵
Hi Claire with the worded inlays couldn’t you put them back side facing up in your mould, pour your resin once cured remove the inlay, have wrong side up use whatever chameleon powder then fill in the void where the inlay was? 🤔
Great video!! Maybe use a color in the last layer you add so you have a pop of color on what will be the bottom. Always love to watch your videos, always get inspiration from them😃
Awww bless you Claire 🤗 All that hard work you put into it 😔Thank you sooo much for still showing the video 👍 The silicone mold has turned out beautiful...Love to see what you do next 😃 Love how you always look on the bright side 🤗
Hi Claire!! Loving your videos you always sound so upbeat. I was watching Wendy At Toonpish and she had the same issue. She had success getting the inlay out again be using a heat gun to soften the resin. Hope it helps.
Great video on mold making Claire ❤ So sorry it didn't work out for you this time in resin. Looking forward to seeing your next video. Take great care ❤️
I learned the lesson you have with making a silicone piece, now if I have a piece that isn't weighted, I pour a small amount of silicone, let it set, then pour the rest. You only have to do this once to learn... : )
Hi Claire! There's still a chance you can get the mould out using heat. I had an inlay stuck even deeper, and it was a druzy so I cut my hands pretty badly trying to get it out. Heat gun helped get it out within seconds though. Good luck!
Those inlays were amazing,Ms Claire 😍😍.Love the color that you selected to add to your inlays and they did turn out beautiful.Its nice learning experience for you as well as is,that we have to use less resin from next time,but it actually gives that resin effects only 💜😅
Add a mold release spray under your inlay then a thin layer of resin with something on top of inlay to hold it down till it has cured. The mold release spray will help with the suction you want. I think the heat gun makes it come away from the bottom possibility.
Wendy had a problem with one of the seahorses floating but she used heat from her heat gun to soften the resin and got it out. It might be too late for yours by now though, but worth a try?
Wow. I was just thinking about this today and I couldn’t believe it when I saw it in your video. Yesterday I made a silicone inlay from a silicone mold. I first coated the mold with a tiny amount of Vaseline and it came out perfect. It’s a very small mold. Does anyone think Vaseline would help to adhere the inlay to the silicone?
Now that you've planted the idea of a clearr trinket dish with an ammonite in my head, I want to see you make one. You should prop up the trial piece on it's side, so light could really get through it. It is like a fossil from space.
12:45 I don’t know if you or a friend/family member has a circular saw that is attached to work desk for safety, you (or someone you trust) could always saw a layer of resin off leaving a thin layer which your craft knife could cut through to release your mould. Just a suggestion inspired by a workman nearby doing some work for a neighbour & I can hear him cutting planks of wood. It’s a possibility anyway.
If you put hot glue into the words blocking them off you could probably still use the ones with words on them. Just make a “blank” space with the hot glue so you can use vinyl or just write on them instead.
To make the tray sit flat I use a shallow dish and put a layer of sand I to the bottom and press the mold down until it is flat, If I'm not sure I got it right I check with a level.
As far as I know the molds from stamperia are made for the stamperia paste to make embelishments for mixed media pieces. Not really for resin ore other pouring mediums thats why there are not as flat and even as usual molds.
If you glue the silicone inlay onto the bottom of the mould it would be there forever and you would not only sacrifice the coaster mould but you'd be stuck making that exact piece over and over again with no chance of using the other inlays to create different designs
Heyyy lovelies.. I found the moulds on AMAZON - links are below 🤩🤩🤩
Charmed cards & crafts have a load also
Hey Claire, I saw a post where your name was used in a review for i think it was Resineers (see Daniel Coopers community post) about an air filter with a Heppa filter. They used not only your name and review but also Daniel Coopers and one other resin artist on UA-cam named Steve or Steven McDonald (sorry I don’t remember the name) so many apologies to the third person. Anywho if you didn’t try and review this product you need to say something I have never heard you mention this air purifier nor have you shown this product so please let them know how wrong this is and let us know if you were wronged!! Just looking out for you.
@jennifercriss1897 heyyyyyyy Jennifer ... you are a star thank you... I was chatting to Daniel about this yesterday when he discovered it .. I do not believe my name was used. I believe it to be Steve and Pouring your heart out ... however it is utterly shocking as the machine isn't even available to anyone at this stage.
I will double check this for sure to see if I was mentioned. Thank you xxx ❤️❤️❤️❤️
I love how you still show stuff that’s gone winky wonky! Makes us all feel like if ours go wrong then we aren’t alone, especially if someone as talented as you gets it wrong too lovely xx
3:38 If you got a square washing up bowl & filled it up an inch or two deeper than the moulds deepest depth with some sand (rice may work) & push the moulds into them. Use a spirit level to insure that they are all level. It will also support the moulds shape from below.
I agree, and I have over 20 pounds of rice, which I will not eat.
This is a great idea for those flimsy Temu moulds.
Beautiful inlays. Thanks for sharing Claire.
What a bummer! I was surprised it didn't work. It's still very informative. Thank you for sharing!❤❤
I have loads of these moulds, from my mixed media obsession, I can see lots of fun ahead, have used them with resin but never thought about using with silicone, thanks Claire ❤❤
Can I ask what resin do you use in them, I am worried that the wrong resin will ruin them
Another learning experience for the books...Love you Claire!!! Happy Saturday!
You don't have to apologize to us the most important thing is your still here and your in the process of healing yourself and that is more important than any videos up don't upload and when your ready to come back or decide not to we all understand and still love you ❤️
I 100% understand what your saying I have pretty bad depression, anxiety, panic attacks and have agoraphobia but I have slowly learnt I need to put me first so
PLEASE don't worry about us just concentrate on you and get yourself better.
Take care sending you a big hug and all my positive vibes 🩵🩵🩵🩵
Hi Claire with the worded inlays couldn’t you put them back side facing up in your mould, pour your resin once cured remove the inlay, have wrong side up use whatever chameleon powder then fill in the void where the inlay was? 🤔
Gorgeous inlays and a noce learning experience for everyone. Despite the inlay got stuck ,it looks wonderful in there💜💜💜💜
Great video!! Maybe use a color in the last layer you add so you have a pop of color on what will be the bottom. Always love to watch your videos, always get inspiration from them😃
Thank you for sharing Claire. The inlays are really cool. I would like to see this with foil flakes, I think it would look amazing. ❤
Awww bless you Claire 🤗 All that hard work you put into it 😔Thank you sooo much for still showing the video 👍
The silicone mold has turned out beautiful...Love to see what you do next 😃
Love how you always look on the bright side 🤗
Ohhh, dear! I'm so sorry it didn't work out, Claire! Next time, it'll work! Gold flakes would be very pretty!
Oh my gosh my pocketbook is crying. I love it
I found a lot of these plastic candy molds on Amazona huge assortment. Love your work thanks for the video.
Beautiful inlays and paperweight ❤❤❤ You always find a bright side to everything ❤❤❤
I absolutely LOVE your energy. I could watch your videos for hours. You and your talent just rock. ❤❤
I love that you share the how not to do it as well as the successes. It's all the learning experience so it will look stunning next time.
Do it again!!! Absolutely love that you show us your "mistakes". Even though it's pretty.
Great lesson! I would not have known that. 😮
Thank you Claire for showing your fail. I’ve done this before, unfortunately. Your inlays are beautiful. Have a wonderful weekend x❤️
This was a rollercoaster! 💜
Pour a thin layer (enough to cover inlay 1/2 wayy to secure it to bottom) and put a weight on top of inlay then after cured fill mould.
Hi Claire, try That's Crafty, Hixxy Soft, The Mad Scrapper for moulds. I used to sell them in my shop but don't have any left 😊 x
Ohh do them all heheheh Awesome stuff Claire
Hi Claire!! Loving your videos you always sound so upbeat. I was watching Wendy At Toonpish and she had the same issue. She had success getting the inlay out again be using a heat gun to soften the resin. Hope it helps.
Great video on mold making Claire ❤ So sorry it didn't work out for you this time in resin. Looking forward to seeing your next video. Take great care ❤️
I learned the lesson you have with making a silicone piece, now if I have a piece that isn't weighted, I pour a small amount of silicone, let it set, then pour the rest. You only have to do this once to learn... : )
yes absolutely - that is what I said in the video and will definitely be doing this xx
Hi Claire! There's still a chance you can get the mould out using heat. I had an inlay stuck even deeper, and it was a druzy so I cut my hands pretty badly trying to get it out. Heat gun helped get it out within seconds though. Good luck!
Those inlays were amazing,Ms Claire 😍😍.Love the color that you selected to add to your inlays and they did turn out beautiful.Its nice learning experience for you as well as is,that we have to use less resin from next time,but it actually gives that resin effects only 💜😅
Aw, that's a shame Claire. It was a great idea and I'd love to see you do it again.
Oh Claire you always make me laugh 😊
So do same but colour the shell thing coloured! Gosh can't spell today 😅😅see your not alone!!
These are really cool!
Totally something I would do Claire! 😂 Can't wait to see the next one 🤩😍
Add a mold release spray under your inlay then a thin layer of resin with something on top of inlay to hold it down till it has cured. The mold release spray will help with the suction you want. I think the heat gun makes it come away from the bottom possibility.
Make the inlays different colors and use as inserts in the resin. For different projects. Like bowls or trays. 😊
beautiful inlays
i wonder if you had heated up the back and then tried to cut into the resin would you have been to save the silicone inlay
Can't wait to see you try it again. Just my 1 cent
Claire try again with clear❤ always a pleasure
Wendy had a problem with one of the seahorses floating but she used heat from her heat gun to soften the resin and got it out. It might be too late for yours by now though, but worth a try?
Wow. I was just thinking about this today and I couldn’t believe it when I saw it in your video. Yesterday I made a silicone inlay from a silicone mold. I first coated the mold with a tiny amount of Vaseline and it came out perfect. It’s a very small mold. Does anyone think Vaseline would help to adhere the inlay to the silicone?
Now that you've planted the idea of a clearr trinket dish with an ammonite in my head, I want to see you make one. You should prop up the trial piece on it's side, so light could really get through it. It is like a fossil from space.
Temu has some sea themed molds very similar to yours. They ship anywhere with free shipping.
Hi Claire could you not heat up the resin to get it out? 🤔 , hope you George and Tim are well, sending love ❤️❤❤ xxx
heyyyyy lovely - a few have mentioned it and I would have if it was a couple mm from the surface but it was truly embedded :(
12:45 I don’t know if you or a friend/family member has a circular saw that is attached to work desk for safety, you (or someone you trust) could always saw a layer of resin off leaving a thin layer which your craft knife could cut through to release your mould. Just a suggestion inspired by a workman nearby doing some work for a neighbour & I can hear him cutting planks of wood. It’s a possibility anyway.
So sorry for all your hard work…. But, that being said, it is still beautiful!!
You can pour resin in Stamperia molds 🙂
ooooo amazing :)
If you put hot glue into the words blocking them off you could probably still use the ones with words on them. Just make a “blank” space with the hot glue so you can use vinyl or just write on them instead.
To make the tray sit flat I use a shallow dish and put a layer of sand I to the bottom and press the mold down until it is flat, If I'm not sure I got it right I check with a level.
Please t❤ry again Claire, it looks beautiful. 😊
Put rice on a baking sheet and lay the mold in it should stabilize it
Could you do it in 2 pours? One to the top of the inlay and the second to fill the mold.
Yessss this is what I say in the video 🤩🤩🤩
I´m only guessing ´cos I never used silicon, couldn´t you put tape on the writing and then pore the silicon on
A beautiful disaster 🥰
That's Crafty (uk) sell stamperia molds
Lovely Claire very nice ❤️🩵💚
It’s still pretty though ❤️💜
As far as I know the molds from stamperia are made for the stamperia paste to make embelishments for mixed media pieces. Not really for resin ore other pouring mediums thats why there are not as flat and even as usual molds.
Ahhhh yes this makes sense ..🙌🙌
Why couldn’t you glue it on the mold? I must be missing something. But nice try! I will look forward to your next try with this. Thank you! ❣️
If you glue the silicone inlay onto the bottom of the mould it would be there forever and you would not only sacrifice the coaster mould but you'd be stuck making that exact piece over and over again with no chance of using the other inlays to create different designs
@@Spiceyspiney I did not know that….thanks!
Paper weight?
❤❤❤
Gutted for you Claire
Just glue gun it down so it wont float. 2 small dots should do the trick!
Ebay have loads
🎉🎉🎉🎉🎉
Dang it.
❤👍🏻😊
Oops! 😂
😲🥺😭
❤❤❤