We've added English subtitles to this video. We work hard to reach as many people around the world and help them learn woodworking. We need your help to translate our videos subtitles to your language and progress our work. Please contribute translations here: ua-cam.com/users/timedtext_cs_panel?tab=2&c=UCc3EpWncNq5QL0QhwUNQb7w
Paul, I have watched all of your videos and enjoyed each one. So I was going to post a comment and looked at several responses to you and your abilities. I don't know what makes people troll youtube to post nasty comments. But please understand almost everyone that watches your videos appreciate them. It's great to watch a craftsman share his knowledge. Thanks, Morgan
I am 50 year old,i was only taught the figure of eight way to sharpen any chisel,yet i have only seen you use it today,no one else on youtube uses this method on Camera & i have watched many. I love it & use it a great deal,as practice make the perfect sharpened edge.
I recently bought a gouge for $1 at a yard sale and was wondering how to sharpen it and so came across this video. Thank you, thank you, thank you for making this video. You do a really nice job of showing the various methods and I like your down to earth style.
My Grandfather and my great grandfather were both master carpenters,And I have inherited a lot of their tools. If I had had a woodworking teacher like you in the 60 when I was at school , I may have followed in their footsteps. Keep it up I am slowly learning how to use them old tools.
Paul, this is wonderful. I have seen standard chisel sharpening many times, but sharpening of gouges was always a complete mystery and never explained to me. This is the first time I have ever seen how this is done. Thank you.
Thank you! What I learned today: My work on the lapping stones is OK; getting the same results. Green polishing compound was a good choice for stropping, despite being considered a 'power-wheel' compound by some. I have been way too dainty using the strop. Bear down with enough force or you are wasting time! The tool should get a bit warm from friction. I didn't run the strop long enough. Five to ten strokes is not even a decent start; 50-80 strokes between inspections is about right. My use of 2500 grit paper on a wood form to break the burr is not a bad thing, but I could do better with slip-stones/leather pad. Again, thank you for this, I am building a collection of Pfeil gouges for violin carving and I want them at their best!
Thanksa Paul I’ll watch this a few times , the sharpening system I was going to buy would be about £800 which is mad , I thought I was subscribed I was not ! But am now , glad to have you onboard …very inspirational thanks mate ..
Been using my main gouge a great deal lately and needed a sharpening. Was intimidated for fear of messing up the edge and bevel. Was going to write and ask for your advice and here it is before I wrote. Superb and simple; can't wait to attempt the first method...probably get a cheap chisel and practice the figure eight before trying on my Pfeil. VERY grateful for this lesson!
Hello Paul, thank you for the great instuctions on how to sharpen a gouge. I am making an archtop guitar at this moment and my gouge did not to a nice job, i now know how to improve that. Regards Sander van der Voort from the Netherlands
i love this video. All of your videos actually Paul. They are just a huge inspiration and i just consider you to be just the overall general woodworking "authority" - and the amount of knowledge you've shared throughout all your videos is just outstanding. Just made my own 3 legged stool you showed in your last project series on UA-cam. Can't wait for the next one! Until then - i can easily just watch all your videos on repeat. I look at your shop and become so envious that you've been able to make your living doing this for so long - and now get to share this lifetime of experience with us all here. Cheers Paul - and thanks for everything thus far!
thank you for the tutorial. I'm just getting into woodworking but I have an issue with buying the tools and not knowing proper care and maintenance (makes it hard to pull the trigger on good tool purchases). Appreciate the step by step explanations and the alternative options to work with what I have.
i would enjoy seeing you post a video showing us this workbench and some of its features. why you chose that particular design. what you would change about it. etc.
I've been watching a lot of turning videos lately and they all use grinders to do their gouges. Had me wondering how you'd do it by hand. So this video came out at a great time.
IMHO I don't think a wood turning gouge needs to be as sharp as a wood carving tool. I do both. With a lathe you have the power of the machine cutting. With hand woodcarving it is man power so a slick blade is essential.
When I was at school 50 years ago we messed the teachers around terribly. Now I would give my eye teeth to be in those workshops again, learning how to do all these wonderful things.
Thank you. This is the clearest instructional video I've seen on the subject, and I've been looking! I do have a leather wheel for stropping and it works well for a beginner like me. Yet I want to be able to sharpen on flat stones as well, so I'm not taken by surprise if I can't have my drill and leather wheel in some situations.
Figure of eight is a nice trick! Another trick to save time sharpening is to use the flattest sweep of gouge that will get the job done. They get more time consuming as well as more difficult to sharpen the deeper they are; and v-tools are the worst. Take care of the inside of your gouges, too. Keep them well oiled (wipe on, wipe off). The inside is akin to the back of a carpenter’s chisel: too many pits and it always needs a micro backbevel which is added work and means you have to attack the wood at a steeper angle.
thanks for your educating video, BUT i have given up mastering both the rolling and the figur 8 sharpening technics, but i now came up with this diy solution, that works ok for me,,, with the dull gouge, i cut a long flat cut out in plane hardwood,,, then i add some sheppach honing compound pasta, about grid 180, and then move the gouge forth and back, its not perfect, but all edge wide gets sharpened...
Does anyone know where I could buy a set of stones like Paul uses in this video? I recently got a 2md hand set of vintage gouges which will need some sharpening. Thanks
Mr Sellers , I've watched many of your vids , and more then once . This is my first time commenting , and right off the top I want to say thanks for your time and help with these informative vids as I progress in bringing my Grandfathers tools back to life . Now I know what this thing is I have A Slip Stone ! What other uses does it have ??? I also have his flat stones , I've been putting water on them too sharpen, maybe they are Oil stones , What is the difference and how do I know ?? Thanks from Canada , Cyril
I think the slip stones can be applied to a wide range of different sharpening applications and of course they can be shaped to particular tools like gauges and other cutting edges. Often they are not really very specific and therefore there is no definitive answer.
Hi Paul, have you done a video on how to sharpen a bent chisel. I have a spoon gouge and I can’t get the bevel right so it’s not sharp. Could you help me please! Kim🇨🇦
Excellent video. Is that a W. K. & C Peace Eagle Works gouge with the brass ferrule? It is IDENTICAL to one I am trying to sharpen using this video. The inside was slightly beveled and I am trying to reflatten the concave. Tough going with a dowel and sandpaper.
I like how you have the stones setup. Although, does it limit the stones to chisels, planes? Getting a knife edge on the centre stone would be a bit difficult i would imagine.
Excellent video as always. I made a sharpening station like you have. I have been looking for a inexpensive gouge set and wondered if you had any recommendations. Thanks!
I have chisel or gouge with the bevel on inside - not outer circumference like these shown in this video. Why the different bevel locations and how to sharpen these internal bevel types quickly?
Paul How would you sharpen a gouge where the bevel is inside the concave (In-Cannel) rather than outside I have two of these other types and never really been able to sharpen them
Take a length of wood with a matching radius (or as close as possible) such as a broomstick and wrap a piece of wet-or-dry paper over it. Clamp it in your vice so the paper is tight and pull the gouge over it until sharp. Take the burr off the other side on your stones.
in theory its all easy to learn..its trial and error through practice practice practice until you can get consistent results. Sharpening isnt much of an issue for me as i have been doing it forever. I have been practicing handcut dovetails for about 2 years now off and on and still screw them up about 80% of the time. lol
Slipstones, abrasive paper on a rounded stick, and if hey are really bad, you can reshape them with a Dremel following with the stones (not Mick and the boys) or the paper and honing.
Paul's gouge has such a great finish inside! I recently acquired 4 new gouges where the inside is far from that and I would definitely like to improve that. How can this be done? I've searched google and youtube but to no avail, I would appreciate insider's tips and tricks?!
I recommend fine abrasive paper followed by buffing with a buffing wheel charged with fine buffing compound. Just keep in mind hat this is purely cosmetic and has no effect on the tool operation. Watch the heat buildup. Have fun
Hi Paul, thanks for your videos! I've watched many of your videos and have learned a lot from you. I have a question regarding gouges. What is the difference between an inside bevel gouge or an outside bevel gouge? I have an inside bevel gouge, would I be able to use it to carve a spoon as efficiently?
Hi paul i was wondering if you could offer some advise i have just completed my site joinery apprenticeship and had been let go due to covid once complete I have just started s a technician in a local college have a lot of gouges to sharpen but the are the the internal bevels and some are quite damaged due to poor use by the students i was wondering how would you possibly grind the beve the sharpening i would be using dowels with wet and dry paper/slip stone or would this be the best wasy to grind the edge down down .keep the content coming thank you paul
We've added English subtitles to this video.
We work hard to reach as many people around the world and help them learn woodworking. We need your help to translate our videos subtitles to your language and progress our work.
Please contribute translations here: ua-cam.com/users/timedtext_cs_panel?tab=2&c=UCc3EpWncNq5QL0QhwUNQb7w
The years on the end of a chisel show, the speed, grace, & precision is absolutely beautiful to watch.
Paul, I have watched all of your videos and enjoyed each one. So I was going to post a comment and looked at several responses to you and your abilities. I don't know what makes people troll youtube to post nasty comments. But please understand almost everyone that watches your videos appreciate them. It's great to watch a craftsman share his knowledge. Thanks, Morgan
4637bigred Amen
It's beyond me too. I guess people with few skills and little respect for themselves, very sad.
,
James .Pritchard “hurt people” want to hurt people🙄
I’ve learnt so much from Paul’s excellent straight forward videos, an incredible teacher. Thank you
super , its showed me every "step" I needed to understand . I`m in your debt , THANK YOU !!!
This is WONDERFUL. Thank you for demystifying sharpening curved gouges!!!!
I am 50 year old,i was only taught the figure of eight way to sharpen any chisel,yet i have only seen you use it today,no one else on youtube uses this method on Camera & i have watched many. I love it & use it a great deal,as practice make the perfect sharpened edge.
Took me 3 hours of searching UA-cam for this information thank you
I recently bought a gouge for $1 at a yard sale and was wondering how to sharpen it and so came across this video. Thank you, thank you, thank you for making this video. You do a really nice job of showing the various methods and I like your down to earth style.
My Grandfather and my great grandfather were both master carpenters,And I have inherited a lot of their tools. If I had had a woodworking teacher like you in the 60 when I was at school , I may have followed in their footsteps. Keep it up I am slowly learning how to use them old tools.
Paul is my go to guy for things like this. I totally trust him and thank him for sharing his 50+ years of experience. He got me in the game.
Me too .He's a mine of information.
Finally, just what i needed to know. Everyone else seems to use all these expensive materials to sharpen tools. Thank you!
My wife will be thrilled when I use a piece of the couch.
Great video- no nonsense, no wasted time spent watching minutes of sharpening. Just the essentials- and lots of information and techniques. Thank you.
Paul, this is wonderful. I have seen standard chisel sharpening many times, but sharpening of gouges was always a complete mystery and never explained to me. This is the first time I have ever seen how this is done. Thank you.
I like your videos, they are calming. It is so satisfying to watch a professional do his work.
Thank you!
What I learned today:
My work on the lapping stones is OK; getting the same results.
Green polishing compound was a good choice for stropping, despite being considered a 'power-wheel' compound by some.
I have been way too dainty using the strop. Bear down with enough force or you are wasting time! The tool should get a bit warm from friction.
I didn't run the strop long enough. Five to ten strokes is not even a decent start; 50-80 strokes between inspections is about right.
My use of 2500 grit paper on a wood form to break the burr is not a bad thing, but I could do better with slip-stones/leather pad.
Again, thank you for this, I am building a collection of Pfeil gouges for violin carving and I want them at their best!
I was fixing to buy a Tormek t8 sharpening system for just $729. Paul just saved me a ton of money.
Get the tormek. You can sharpen loads of different tools on one. I've had one for 15 years and wouldn't be without it.
Thanksa Paul I’ll watch this a few times , the sharpening system I was going to buy would be about £800 which is mad , I thought I was subscribed I was not ! But am now , glad to have you onboard …very inspirational thanks mate ..
Been using my main gouge a great deal lately and needed a sharpening. Was intimidated for fear of messing up the edge and bevel. Was going to write and ask for your advice and here it is before I wrote. Superb and simple; can't wait to attempt the first method...probably get a cheap chisel and practice the figure eight before trying on my Pfeil. VERY grateful for this lesson!
I dont know why, this video feels right, the teaching, the speaking, just right.
This has helped me a ton. Thank you Paul👍🙂👍
Hi from Belgium (french speaking) It's such a pleasure to see such an artist at work. Thanks for this show!
Sir, thank you very much for this technique. It is greatly appreciated.
thankyou - am a beginner and didn't want to ruin my new gouges so these two methods are ideal for me.
It's always a treat to wake up to a new Paul sellers vid. Thanks!
Hello Paul, thank you for the great instuctions on how to sharpen a gouge. I am making an archtop guitar at this moment and my gouge did not to a nice job, i now know how to improve that. Regards Sander van der Voort from the Netherlands
i love this video. All of your videos actually Paul. They are just a huge inspiration and i just consider you to be just the overall general woodworking "authority" - and the amount of knowledge you've shared throughout all your videos is just outstanding.
Just made my own 3 legged stool you showed in your last project series on UA-cam. Can't wait for the next one! Until then - i can easily just watch all your videos on repeat. I look at your shop and become so envious that you've been able to make your living doing this for so long - and now get to share this lifetime of experience with us all here.
Cheers Paul - and thanks for everything thus far!
I bought a very old gouge now I can sharpen it properly thanks Paul now a new subscriber
Thank you for this great lesson!
🤣A piece of a couch.lol🤣
Great video, Paul! I love learning how to do things from you. You make it interesting and easily to do .
Thanks Paul - very helpful.
Paul. Very well done. I always learn something new watching these video's.
Awesome Paul. Needed to learn case of chisels that are now going to be used. Thanks Neal
just I was wondering how to sharp my gouge. thank for sharing this. greetings from Peru.
thank you for the tutorial. I'm just getting into woodworking but I have an issue with buying the tools and not knowing proper care and maintenance (makes it hard to pull the trigger on good tool purchases). Appreciate the step by step explanations and the alternative options to work with what I have.
i would enjoy seeing you post a video showing us this workbench and some of its features. why you chose that particular design. what you would change about it. etc.
I've been watching a lot of turning videos lately and they all use grinders to do their gouges. Had me wondering how you'd do it by hand. So this video came out at a great time.
IMHO I don't think a wood turning gouge needs to be as sharp as a wood carving tool. I do both. With a lathe you have the power of the machine cutting. With hand woodcarving it is man power so a slick blade is essential.
I bought a load of gouges a few weeks ago. They're good gouges but they all need sharpening. Thank you for this video.
*Thanks Paul for this method, I have two German-made gouges that need sharpening (now I know what to do)*
Great video Paul.
Wow, I loved every minute of learning from you. Truly inspiring 🙂 Thank you. Subscribed!
When I was at school 50 years ago we messed the teachers around terribly. Now I would give my eye teeth to be in those workshops again, learning how to do all these wonderful things.
Benefits of youth is wasted on the young. lol
@@tonispiip8054 Oh so true!
thank you for showing how to sharpen a gouge.
Thank you. This is the clearest instructional video I've seen on the subject, and I've been looking!
I do have a leather wheel for stropping and it works well for a beginner like me. Yet I want to be able to sharpen on flat stones as well, so I'm not taken by surprise if I can't have my drill and leather wheel in some situations.
Nice, thanks for showing us. Take care.
Perfect timing for this video, need to sharpen up some of my gouges!
Paul is a genius .No not a genius BUT he has 1/2 a century of experience and knowledge .Same thing in my book.
Thank you!
I managed to make mine more blunt at first, but this helped me fix my poor little gouge
such clear and helpful explanations. Thank you.
Brilliant! Thank! My new go to method.
Thank you always enjoy your videos
Thank you mister Sellers !
Excellent as always
Thank you for sharing your knowledge
Figure of eight is a nice trick! Another trick to save time sharpening is to use the flattest sweep of gouge that will get the job done. They get more time consuming as well as more difficult to sharpen the deeper they are; and v-tools are the worst. Take care of the inside of your gouges, too. Keep them well oiled (wipe on, wipe off). The inside is akin to the back of a carpenter’s chisel: too many pits and it always needs a micro backbevel which is added work and means you have to attack the wood at a steeper angle.
Thank you so much Paul !
simple, straightforward, though not necessarily easy, I think the stone shapening part takes practice.
good content
Thanks so much sir.
yesterday I was wondering how to sharp a gauge.
I know this video is 5 years old but thank you Paul!
thankyou - very useful to know - am a beginner and have a daunting job in front of me.
thanks for your educating video, BUT i have given up mastering both the rolling and the figur 8 sharpening technics, but i now came up with this diy solution, that works ok for me,,, with the dull gouge, i cut a long flat cut out in plane hardwood,,, then i add some sheppach honing compound pasta, about grid 180, and then move the gouge forth and back, its not perfect, but all edge wide gets sharpened...
Hi there from Portugal,
Nice :D
Obrigado(Thanks) Master P.Sellers
Man I’d love to have tools like that
Great video!
Thanks for this Paul
great help to me , Thank you .
That figure of eight method is some kind of sorcery.
great info thanks so much.
Does anyone know where I could buy a set of stones like Paul uses in this video? I recently got a 2md hand set of vintage gouges which will need some sharpening. Thanks
I love your videos
Thanks I like your videos.
Mr Sellers , I've watched many of your vids , and more then once . This is my first time commenting , and right off the top I want to say thanks for your time and help with these informative vids as I progress in bringing my Grandfathers tools back to life . Now I know what this thing is I have A Slip Stone ! What other uses does it have ??? I also have his flat stones , I've been putting water on them too sharpen, maybe they are Oil stones , What is the difference and how do I know ?? Thanks from Canada , Cyril
I think the slip stones can be applied to a wide range of different sharpening applications and of course they can be shaped to particular tools like gauges and other cutting edges. Often they are not really very specific and therefore there is no definitive answer.
Thank you.
Excellent video. Would you use the same technique to sharpen an adze with an outside bevel?
Where would I get a piece of leather like you had for stropping the burr off the inside ?
Hi Paul, have you done a video on how to sharpen a bent chisel. I have a spoon gouge and I can’t get the bevel right so it’s not sharp. Could you help me please!
Kim🇨🇦
Pará nada hablo ingles, ése hombre es una eminencia.
well done video....thank you
Paul do you a video on how to sharpen Pfeil straight D1/2 carving chisel
Excellent video. Is that a W. K. & C Peace Eagle Works gouge with the brass ferrule? It is IDENTICAL to one I am trying to sharpen using this video. The inside was slightly beveled and I am trying to reflatten the concave. Tough going with a dowel and sandpaper.
Wonder what kind of Stones you're using. Again, a great Video, easy to understand. You're a wonderful Teacher :-D
Harald Ibener dmt
He uses EZE-LAP diamond stones
dmt means ?. Sorry, I'm Paul Sellers generation, i'm not too familiar with the abreviations :-)
DMT is brand of the stones, but I think that it was mentioned that those are Eze laps, not DMTs.
@Bossyrangs Thank you :-)
I like how you have the stones setup. Although, does it limit the stones to chisels, planes? Getting a knife edge on the centre stone would be a bit difficult i would imagine.
Brett yes tends to be not practical for knifes
Brett but its removable
Excellent video as always. I made a sharpening station like you have. I have been looking for a inexpensive gouge set and wondered if you had any recommendations. Thanks!
Pat Moore Good point. I'd like to do my early learning of the figure eight on low-end chisels. Advice, Mr. Sellers?
can you do a video on concave spokeshave sharpening?
I have chisel or gouge with the bevel on inside - not outer circumference like these shown in this video.
Why the different bevel locations and how to sharpen these internal bevel types quickly?
When outside of the shop or lacking charging compound, could you rub the abrasive paste from the stone directly onto the leather strop?
Diamond stones have no paste. Water stones create paste but the idea is to move to finer abrasives at each step.
Paul How would you sharpen a gouge where the bevel is inside the concave (In-Cannel) rather than outside I have two of these other types and never really been able to sharpen them
Inside is IMHO only possible with a very fine file. Can be wrong, i'm an Amateur :-D
ive tried various ways but never really been successful
Gary Wilson Seems you have to try the other way...
Slipstones
Take a length of wood with a matching radius (or as close as possible) such as a broomstick and wrap a piece of wet-or-dry paper over it. Clamp it in your vice so the paper is tight and pull the gouge over it until sharp. Take the burr off the other side on your stones.
Thanks for the vidéo
thank you
Would this same method work with a wood-turning/lathe gouge?
thank you, for the lesson......
Hi! What brand of auto glass cleaner do you use? I've heard Windex is an option, us this true?
Holly shit he knows his stuff big time
Thanks.
Figure of eight looks like it requires more finesse than I could muster 😆 rolling method looks like it'll do!
I think that method is easy to learn but how do you effectively sharpen in-cannel gouges?
in theory its all easy to learn..its trial and error through practice practice practice until you can get consistent results. Sharpening isnt much of an issue for me as i have been doing it forever. I have been practicing handcut dovetails for about 2 years now off and on and still screw them up about 80% of the time. lol
You don’t...
You cut them off and make a normal gouge because nobody uses in-channel gouges 🤪
Slipstones, abrasive paper on a rounded stick, and if hey are really bad, you can reshape them with a Dremel following with the stones (not Mick and the boys) or the paper and honing.
Paul's gouge has such a great finish inside! I recently acquired 4 new gouges where the inside is far from that and I would definitely like to improve that. How can this be done? I've searched google and youtube but to no avail, I would appreciate insider's tips and tricks?!
Found good tips on a blog post by Paul from 2011: paulsellers.com/2011/04/restoring-woodworking-gouges-project-2-part-1/
I recommend fine abrasive paper followed by buffing with a buffing wheel charged with fine buffing compound. Just keep in mind hat this is purely cosmetic and has no effect on the tool operation. Watch the heat buildup. Have fun
Fine abrasive paper followed by a buffing wheel charged with buffing compound.
Can I say it one more time?
The strop fury side or smooth side, please? Thanks.
Hi Paul, thanks for your videos!
I've watched many of your videos and have learned a lot from you. I have a question regarding gouges. What is the difference between an inside bevel gouge or an outside bevel gouge?
I have an inside bevel gouge, would I be able to use it to carve a spoon as efficiently?
Hi paul i was wondering if you could offer some advise i have just completed my site joinery apprenticeship and had been let go due to covid once complete I have just started s a technician in a local college have a lot of gouges to sharpen but the are the the internal bevels and some are quite damaged due to poor use by the students i was wondering how would you possibly grind the beve the sharpening i would be using dowels with wet and dry paper/slip stone or would this be the best wasy to grind the edge down down .keep the content coming
thank you
paul
Try his website www.paulsellers.com