HICAS Delete Tutorial

Поділитися
Вставка
  • Опубліковано 6 лют 2025
  • Tutorial on how to remove the full HICAS system from Nissan chassis. I try to explain everything and show how to do it rather than miss steps like other people. I wanted to keep it but under hard accelerations I can feel the rear moving around and I would rather it be in a fixed position. Although, I understand and have used the system when driving into corners!

КОМЕНТАРІ • 20

  • @macallen6889
    @macallen6889 2 роки тому +3

    Hey bro what wire from the hicas loom did you have to earth ? I’ve just done this on my r33 GTR aswell. Your altessa video sent me here

  • @Andyee415
    @Andyee415 3 роки тому +1

    I have been dreading doing this to my s13. Thank you for the video man, I am going to attempt tacking it this weekend!

    • @Nismology33
      @Nismology33  3 роки тому

      No problem!!! I love the Hicas but under more HP it starts to act up

  • @LeroyGTR
    @LeroyGTR 3 роки тому +1

    So, did you end up cutting the green/white wire on your R33 or took out the bulb for the hicas light to shut off?

    • @Nismology33
      @Nismology33  3 роки тому +1

      I cut the wire

    • @LeroyGTR
      @LeroyGTR 3 роки тому +1

      @@Nismology33 ahh ok. I think i just took the bulb out a while ago. I did the delete and dont see a hicas light no more. Was a while ago when i just took it out (guess i forgot) good video. Had to press them bushings out was the hard part. And today i seen a front axle boot torn smh..so ill be watching your other DIY on that one. Thanks

  • @LeroyGTR
    @LeroyGTR 4 роки тому +1

    i need all the smoke..lol i was going to ask you about this next! did you have to cap off any lines? of just a plug and play application of just the hardware. Also, any warning lights on the dash since removed?

    • @Nismology33
      @Nismology33  4 роки тому

      The R33 and 34 are electronically controlled Hicas, whereas r32 are hydraulically. So just remove electrical connectors and I'm going to remove the Hicas bulb in the dash.

    • @LeroyGTR
      @LeroyGTR 4 роки тому +1

      @@Nismology33 Ahh ok. i have a tuned haltech ECU installed. not to sure if that can control hicas But, i always thought for our 33's we had to cap off some hydraulic lines...good video i just ordered my kit today

    • @Nismology33
      @Nismology33  4 роки тому

      @@LeroyGTR no lines to cap off.. Only 32s

  • @TikiTechGaming
    @TikiTechGaming 4 роки тому +1

    I used two sockets and c clamp

  • @TikiTechGaming
    @TikiTechGaming 4 роки тому +2

    Don’t forget to snip the white and green striped wire on the hicas ecu

    • @LeroyGTR
      @LeroyGTR 4 роки тому +1

      ? what would this help? the light coming on the dash?

    • @Nismology33
      @Nismology33  4 роки тому

      I would like to know also and thanks for the input

    • @TikiTechGaming
      @TikiTechGaming 4 роки тому +2

      @@Nismology33 yes, it will cut the hicas light off. I’ll take a picture of the exact wire i cut and send it to you

    • @LeroyGTR
      @LeroyGTR 4 роки тому +2

      @@TikiTechGaming ahh...in the trunk...under the shelf..its the small box. I googled R33 hicas ECU...took me right to it. Yea, its a fix for the light and system all together just to cut that wire

    • @Nismology33
      @Nismology33  4 роки тому

      @@TikiTechGaming well aren't you just a bundle of knowledge lol.. Thanks my guy 👍🏾💯💯

  • @92AcuraGSR1
    @92AcuraGSR1 4 роки тому +1

    Nice work