Megger | IR Testing |Generator Hyundai | Stx Man B&W | Insulation resistance | IR Exciter | Kalecky

Thanks for your support
For those who want to donate any amount
Thank you very much and God bless
Gcash 09214076231
Safe sailing
This will help us to improve our channel.
Megger | IR Testing | Hyundai | Stx Man B&W | Insulation resistance test | IR Exciter Unit | Kalecky
Paano mag Insulation resistance test ng generator gamit ang fluke ir tester
• Fluke insulation teste...
Paano mag IR test anf Exciter Unit
• How to IR test Exciter...
How to carried out IR test for generator to avoid Malfuntion in the future

[@aleksandrlogin...739]

To all those ETO with questions: in case if you have a 440v alternator - before measurment you have to disconnect AVR only, control circuit are made protected against 500v so dont worry to harm it during insulation testing. Not a big difference in situation with 6.6kV alternator - disconnect the AVR, and wear the gloves bc of residual voltage can be too high that case, measure the line voltage before you start. Peace.

[@noeltarucan5547]

Thank ypu for your shared videos its a big help for new aspirant god bless sir

[@BarkoTv]

It's my pleasure

[@vincentnorwinfonte9814]

thank you sir for sharing your exp.

[@FilipinaWifeAbroad]

what a detailed tour of the parts of the ship friend.its not my cup of tea but it looks admirable that u do this lecture. good luck! and u take care at your work friend.

[@vivekvivek5529]

This is one .i been searching long time .i understood very clearly .thank you so much for your efforts..and also i want know how do check air gab clearance .please suggest video link if u done already ...

[@bernardtolentino1511]

sir leck sna sa next video nyo maituro nyo din ung proper way of performing IR test sa mga transformers on board. Thanks sa mga video tutorials nyo sir leck. more powers po.

[@siddhantsnehi5321]

Very nice explaination, keep it on sir

[@eshaldezoysa]

Thank you very much nice video i learned lot of things

[@narinderkatoch24]

Well explained.

[@jcshaven6093]

this is a job well done

[@maheshshankar1985]

Thank you for the information

[@giovannigonzales7689]

Maraming salamat for sharing your knowledge Sir. God bless po keep safe palagi.

[@tirupathirao8886]

Thank u so much .. Can you show practical rotor insulation in next video ..

[@cyrildelacruzjr4365]

Thanks leacky more power 🙏 keep safe 🙏

[@vvk_gfan4308]

excellent, thank you BARKO

[@lovelysmixvlogg1388]

thank you sa pag share lods

[@elmerbiongan9784]

Interesting video I'm your new subscriber God bless and always keep safe.

[@romeorignaciojr3552]

Sir thank you very much po
GOD BLESSED YOU

[@j3ric907]

Thank you sir

[@etoetrelectrotechnicaleduc1103]

Wow angaling

[@johncantrell614]

Nice video

[@bosslimos6570]

Watching idol very informative content .yung request mo idol na shout out na kita sa huling blog ko . Godbless

[@prasert90667]

Good video 👍👍👍

[@taksh4227]

Very useful video. Do you have IR test procedure softcopy?

[@molinschado1987]

please do the jumper with aligator clip and IR too..

[@dendenmark1447]

Sir, pag wala ako na read na resistance sa exciter windings, need na ba irewind ung exciter??

[@mohammadarianrahmatullah8016]

Sir do you have electrical inpection and testing plan (ITP) for Insulation Resistances? 🙏🏻

[@giovannigonzales7689]

Good day sir. Pwde maka request sir gawa ng video patungkol o comparison between ME ang MC engine kung paano mag astern anong mechanism o principle gamit nila. Maraming salamat po God bless.

[@BarkoTv]

Nasa vacation pa po ako, noted q yan sir

[@spelmenfdo6633]

Good sir how do test the rotor winding and aglicator connected also. But remain thing understood

[@genarojrbaliano3927]

sa office galing yong manual?

[@Titzkie5Channel]

Daming palang connector's

[@thunderjack1162]

Paano mo nalaman sir na yan yung stator winding, may nakalagay ba dyan sa binuksan mo na stator winding yan sir

[@robertomalinao3821]

TNx sa nice vid.mo sir...Tanong sir pag katapos poh mag IR test sa main stator pwede na hindi e short or line to ground short?..

[@BarkoTv]

Pwede naman sir

[@joemarviloriachannel2783]

Hi po sa inyo

[@b.f4294]

At shipyard takeover , those techninians don't disconnect any genertr connection nor fuses, directly megger 5oov on mains 3 terminals, no harm noticed

[@tirupathirao8886]

Please try make short videos.. less than 10 min

[@remygensule758]

DAN Dan Tam's barko tv

[@zaryajgamming4365]

Sir i have 1 question? Why not using 1000v for main stator?

[@BarkoTv]

As per manual, 500v is good enough for this sytem. But 1ooov much better sir

[@user-yf1co1cs8o]

sir tanung lng pó, d po ba masira yung diode habang nag Megger testing alternator?, bagúhàn po ako

[@BarkoTv]

Normally sir dapat Ohmmeter lng po dapat kasi semi conductor, pero pag ang office or company ninyo merong memo na mag IR test or Megger test, gawin mo dyan, e jumper mo yong mga diode using wire, yan yong safety na pina ka best na ginagawa q, sana nakatulong

[@taksh4227]

how to test on main rotor winding side?

[@rajes1991]

Check IR between rotor windings and the earthed shaft

[@JesusFollower386]

San napakita niu sir ung pag short niu actual Ng mga diode

[@BarkoTv]

Browse mo lang Playlist ng Generators sir, nan doon yong last part ng exciter, pero mag upload tayo ng panibago para masundan nating lahat.

[@japhetjalandoni2751]

Hello sir what is the purpose off spare heater

[@indeezr2816]

because of heat IR can be changed.

[@jojo86826]

مرحبا سيدي يوجد على شاشة المنيتور
كبل ١ وكبل٢ وكبل ٣ وكبل ٤
عندي فصل كبل ٣ هل يمكنك مساعدتي

[@noelabadilla]

Good day, Sir tanong ko lang, bakit pag Megger test mo yung L1, L2 & L3 hindi mo push yung “test” ng fluke tester?

[@BarkoTv]

Sa probe ng positive merong test button po. Thanks. Please support my page, like and share to help others. Thanks a lot, mabuhay po kayo sa work ninyo, ingat

[@noelabadilla]

@@BarkoTv oo nga pala, meron ngang test switch doon, kc sa video walang nabanggit na ipush yung “TEST” pag nag IR o hindi ko lang narinig, anyway thanks sa INFO mo and more power to you, sa marami pang ganitong information

[@mannygascon1835]

Sana pinakita mo paano i jumper mga diode sir.

[@BarkoTv]

Sir gamitan mo lang ng alligator clip. Before mo e clip, make sure na malinis ang contact na pag connectahan mo ng clip.,base in my experience pag bago kuha ang barko meron pang electrical insulation paint na nakabalot.

[@kuyamigzt.v4431]

Hindi pinakita sa video kulang.

[@alexpornes7182]

Sir can i have the basic diagram of generator.

[@BarkoTv]

Yan na yong sa video sir, pause mo lng para screenshot yong diagram ng generator side

[@sashamarinov]

Dear friend, you tell everything well, but why were you afraid to touch the stator with lead probe, I still did not understand 😀. Since the stator is star-connected, what's the point of measuring the other two phases. I used to check the rotor four-five times, but then I stopped and measured only the stator. Necessarily disconnected the wires going to the top of the winding from the AVR. After finishing the measurements, I grounded all the points that I measured with a wire for a few seconds.
So I did it on all types of alternators encountered, and in most cases you are afraid to measure insulation, just write that it's good 😀.I can send you a lot of video as I measure it, send your mail

[@etosined9373]

He is joker🤣

[@kuyamigzt.v4431]

Yah luck of information.

[@ivanfmartinezm]

I have tested with megger test Fluke 1578 with 550 Volts test, this same alternator without disconnect the AVR Connector and nothing are happened

[@BarkoTv]

Thanks sa additional info mate❤️

[@ernestotu3973]

I think he could just disconnected the ACB and fuses from the stator and done the IR test on the stator

[@cyrildelacruzjr4365]

Thanks leacky more power 🙏 keep safe 🙏