Cooler Master MasterBox Q300L Revisited
Вставка
- Опубліковано 23 сер 2024
- We recently migrated our LAN party rig to the Cooler Master MasterBox Q300L. Is it good? Check it out here!
#CoolerMaster #MasterBox #Q300L
Find out more at our website here:
www.tech-critt...
Music:
"Apero Hour" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons...
♫Music By♫
●Lakey Inspired - Midnight Bounce
●Song/Free Download - • Video
●Follow Lakey Inspired - smarturl.it/Lak...
idk why everyone is hating on micro. I think it's kinda satisfying to have a more compact build like this one. Good video and good build dude.
Damn that looks really nice ngl. I appreciate small form factor builds a lot
with the m.2 ssd nowadays this case will be pretty awesome for my new build. Nice vid bro. ^_^
Beautiful build! I sell this case a lot to my customers. But seeing it built like this is very interesting and creative!
Thanks for the review. I like your enthusiasm about the build. I'm really thinking about a micro build like this.
Just got this case for Christmas can't wait to use it!
Nice I'll get it in a few weeks
Finally! Now I know it will fit an H100i v2 240mm rad with push/pull config!
I just mounted the SSD on the top front slot with the rubber grommets. The SATA chain goes through the gap below, to the fan hub, and then to the 8TB HDD in the mount on the back. I actually just cable managed by routing the thicker cables around it when I could.
The Corsair CX450 wasn't too bad bc of the sleeved cables. I routed the EPS behind the HDD and up the inner edge.
I kept the io panel in the front, I used motherboard spacers between my aio radiator and the front io cables.
That's really clever!
Is it easy to install some rgb stripes after build or do you need to install them before installing the mainboard and are the rgb stripes magnetic?
tf happened with the mesh filter? 😥😖 It look likes it was folded in some ways lol.
Is the mesh really that soft? :( I plan on buying this case
Ours got folded accidentally before the build
@@TechCritter so it is so weak and soft??
abood tube396 I have the case and it’s not that soft
Not really but handle with care.
I put the "front" panel at the bottom in both mine. The cables are flexible enough to route in front of PSU. No need to move it.
Hey Mate how did you remove pins from connectors? They are hooked...
My wish for a compact PC part list:
-Case: Cooler Master MasterBox Q300L
-Motherboard: ASUS TUF B450M-PRO GAMING (best i can buy at the moment)
-CPU: AMD Ryzen 7 2700 3.2GHz box
-GPU: XFX Radeon RX 590 FATBOY OC+ 8GB GDDR5 256-bit
-RAM: G.Skill Flare X (for AMD) 16GB DDR4 3200 MHz CL14 1.35v Dual Channel Kit
-PSU: Seasonic Focus+, 80+ Gold, 750W
-SSD: CRUCIAL MX300 525GB *
-HDD: Seagate BarraCuda 2TB SATA-III 7200RPM 256MB
-CPU Cooler: CPU ARCTIC AC Freezer 33 TR White (or normal "eSports ONE" for AM4)
-Thermal Paste for CPU: Noctua NT-H1
-Fans+ : Noctua NF-F12 industrialPPC-24V-3000 IP67 Q100 PWM (1x CPU Fan) , Noctua NF-A14 industrialPPC-24V-2000 IP67 PWM (2x front Fans) , Noctua NF-F12 industrialPPC-24V-2000 IP67 PWM (2x back fans with 1x roof top back and 1x back side top)
TOTAL COST at the moment = $1570 (* Ecluding SSD that i allready have in my Laptop)
(ANY SUGGESTIONS?)
better case ..
look around yt,ppl complain about bad airflow and cpu ans gpu getting hot,and with ur parts being on the higher end it could be a problem
so better case
My motherboard 2700x and this case with a 2080ti
750W? Are you kidding me? lol
This price is absolutely horrible... You could easily fit a RTX 2070 in there..
Very nicely build computer. Looks clean and tidy. Nice work kid
Looks like my build. I used this exact case.
I'm glad I saw this. I wasn't sure if the PSU could be mounted on the bottom. Cases are better balanced with the CG low.
i’d recommend the amd wraith cooler with this case it’s nice looking has abit of light and is easy to build with
How long is that GPU? I want to fit Gigabyte GTX 1660 Super Gaming (280mm) and Cooler Master Masterliquid Lite 240 (27mm) in front of case.
Cable management made me cry 😭
Great build!, beautiful case!
About to do a build with this case this week
me too!!
Awesome vid. Quick question: Would you be able to put the ML240L on the top with 1x 120mm fan at the rear of this case and 2x 120/140mm fans at the front or a ML120L on the rear with 2 x 120/140mm fans at the front and 2 x 120mm fans on the top?
This case is kinda difficult to deal with when it comes to aio cooler. The best radiator mounting is at the front
Can you guys give me the part list for this build? i really really liked it just the way it looks
This is a very old build though:
Intel core i7-4790k
ASUS ROG Maximus Gene VI
2x 4GB Corsair vengeance pro ddr3 1600c9
MSI Radeon RX 470 Gaming X 4GB
Bitfenix Fury 550G
Cooler Master MasterBox Q300L
Cooler Master MasterLiquid ML240L
Cooler Master RGB LED strip
very nice build
temps???????
how did u get the cooler master led strips change colour, i cant mine to do that
Cooler Master has two versions of the light strip. One is RGB while the other one is fixed colour.
I love music on this video
Lovely pc match. May I ask where did you get the LED bars inside the case? Thanx
Waiting for the answer
We got them from cooler master Malaysia. They're selling it locally
From where did you get this rgb lighting inside?
looks like it’s coming from the cooler master ML240L cpu cooler
lol nevermind i didn’t see the strips before this comment
the intro is banger
can you give a parts list? I want to upgrade mine ...
i liked the rgb led bars inside the case... on the top...
Can you install an extra pci wifi card? :-)
Depends on how thick the GPU is. Usually, yes.
What CPU YOU GOT ? The Cable management doesn't have to be perfect, only Organized. Nice build, I got the same case. Saving for a NZXT water cooler.
If not mistaken, it should be 4790K
@@TechCritter NICE NICE
what about all the heat issues that every reviewr talks about. have you had any issues?
You got my sub
i cant get my 1080 into the slot on mobo, the slots on case block it from going far enough left for it to go in, what should i do?
so it can fit a 240mm rad in the front?
You can even fit 280mm rad at the front.
thank you
Утеряна рамка крепления блока питания. Что делать. Чем заменить??
Hi, Can I put an intel ARC750, or 770 inside of thsi case?
What graphics card did you use in this?
what length gpu is that? it looks a bit cramped with the aio
i also want to know the length of the gpu! :)
About 280mm or 11 inches
what kind of cpu air cooler can fit in this case? I just got this case preparing to build my 1st pc soob
Maximum supported cooler height is 159mm. Please check your coolers spec before purchase.
Also keep in mind some CPUs come with a stock cooler.
@@plaguedoctor6134 Yes Im planning to use the ryzen 1600 I do know the stock cooler is decent which i'll probably use since someone told me I can overclock to 3.7 on stock
How you install the power supply bellow?
If i have grafic card of 3 fans i can put a radiador 240mm in the front ?
I have this exact case, and thinking of making my cpu cooler push and pull. thoughts?
I think you can but im not surw
When you place the CPU radiator/fan in front, do you suck the air into the case or blow out the hot air to the front of the case???
We suck in air into the case from the front.
I have this case but I can’t got the rgbs on the fan to work someone please help me
can it possibly fit a 280mm radiator?
Unfortunately, no. There are only mounting points for 240mm radiator.
Cómo puedo encontrar esas RGB LEDS?
what's the sea card please
Where is the build video?
I can't find what the max width is for the GPU can anyone confirm this?
looks nice
Can someone please tell me the specs for this specific build
Water cooler name?
Nice build but I think semi modular or modular psu will always serve better in these micro towers
Even better if the system uses m.2 NVMe drives. Less cable mess
north east?
Does a three fan gtx 1660 fit inside?
I don't see why not, but best to check the specs first
What is the name of that RGB lighting inside the case?
Cooler Master Universal RGB LED Strip
What motherboard are you using for this?
ROG Maximus Gene VI
how do you have your fans set up
Push pull configuration
Can u add ssd n harddrives for it cuz i cant see it for this build
1x HDD and 2x. SSD and if your motherboard supports a M.2 SSD than you can total storage device will be 4 supported.
on the top right inside the case u can mount the ssd if u wanna show off
with the aio how much space for the gfx card is there?
Roughly 285mm space for GFX card
Can you fit a GtX 1660ti ??
Yes, shouldn't have any issue since there are plenty of space.
Will this support a tomohawk Max normal size ATX ?
No, it will only take mATX or smaller motherboards.
What kind of LED are you using in there?
We used Cooler Master LED strips
We did an unboxing for it ua-cam.com/video/D0zQOVEEcmg/v-deo.html
Which fans you used???
they look like something also from cooler master to me
I wonder if the rtx 3070 would fit here..
depending on the brand and model, ZOTAC's mini 3070 will fit for sure.
Better use PSU slave cable connector for better cable management.
can rear panel fit my silverstone pf120 radiator?
It should be able to fit, however you need to take note of the thickness when you have fans mounted to the radiator. It might get in the way of your motherboards vrm heatsinks
How did u move the aio panel?
Move? Just unscrewed and screwed it into the new position.
Those magnetic dust covers kill the airflow.
Wait so no one gonna talk about the usb port is in the top?
You can relocate the USB port top, bottom, front or back
Can fit or not gigabyte x570 aorus pro?
X570 Aorus pro will not fit
Can you overclock cpus in this case? It’s said the airflow of this case is shit
You don't, because the airflow on the Q300 and Q500 are shit.
The entire front and top are mesh with room for 5 fans. How is that shit? Of course you can OC in it.
The problem lies at the actual holes on the steel mesh is too small for proper air flow. You can see how Gamers Nexus drilling the Q500 to demonstrate the temperature difference
@@TechCritter You don't even need case fans to OC in this case. The fact that the entire top is vented is sufficient. People get way too hung up on low temps when the fact is that a CPU can run near it's thermal limit 24/7 for 10+ years which is longer than they are typically even relevant. I have an old 2500k at 4.5ghz and a 1060 in one of these with only a rear exhaust fan. While my son is gaming with it, nothing gets anywhere near thermal limit so I am not sure how anyone could find issue with that. I wouldn't stick my 9900k in one but no one should, it is an entry level case.
Tech Critter i have the i5 9600k and a rtx 2060 on this case. Should i overclock it?
how do u move the PSU tho ?
nevermind i have the Q500L FML
Can this thing fit a asrock b450m pro 4 ? Pls someone?
yes it fits
Can it fit a hyper 212 black
Yes, it will fit without any issue
Had extrem Aiflow problems with mit Q300L and RX 590. PC got off after some hours of gaming. GPU went to 85°c. 3D printed a fan box funnel, which solved the Airflow problems. Now my PC runs at 60° to 70°. Maybe 75° if CPU and GPU using 100%, but now crashs anymore! Besided of the temperature problem , I'm very happy with my case. www.thingiverse.com/thing:4402232
You can add the handles from the Q300P. They sell them separately on the Coolermaster website.
Yes, depending on the country and region, CM do sell the accessories separately.
Could you please tell me where did you found those handles? I am at NA and I can't find the handles on their official website.
to to mention its 2 pounds, so very portable
mesh filter looks whack af
Canca chinesa
I have this case, the stock case fan is garbage, came to me dead
GOD IS COMING SOON HE WANTS TO SEE YOU HEAVEN SO DO SO DO I HE LOVES U SO MUCH REPENT FROM YOUR SINS AND EXPECT HIM AS YOUR LORD AND SAVIOR HE IS PROTECTING YOU 24 7 FROM THE EVIL SPRITS HE PROVIDES WITH EVERYTHING AND HE DIED ON THE CROSS TO SAVE U FROM UR SINS YOU COULD BE IN HEAVEN WITH HIM
Shut the fuck up hail Satan
Nosé lo que dice pero miente!