@@TheMetalist DUDE this thing is awesome we still using disc saws here. Or notchers that do on only job, at no less than 240. Daaamn. A plasma cutter is around 150 bucks and your tool is genial you could even turn the tube yourself! And it cuts a lot of stuff I mean in the end its even less dangerous than the 350mm disc saw.
Dude, you outdid yourself again, this is so awesome! Love the creativity and the solutions. Smart and efficient. Thanks for taking the time to film this and sharing it with us!
I watch A LOT of UA-cam videos and come across many great projects/ideas. This ranks at the top! Not only is it a genius idea, but seems fairly simple to make. Rarely do the two go together. Now….to make your motorized chuck.
Great idea! make the patterns double ended for more angles and put a spacer on the torch tip to get a little stand off so you don't burn up tips too fast.
Work smarter, not harder. These are the type of videos I like, no Stupid intros, no begging to subscribe and like the video. just good old information.
Making the ally tube double ended Eg: 60 one end 45 the opposite end 90 and 75 on another piece use wing nuts instead of Phillips head screws . Cheers from a old toolmaker in Australia .
SIMPLICITY IS THE "KEY" BUT IT GOES GREAT ALONG A DASH OF IMAGINATION. OUR FRIEND HERE "THE METALIST" IS ALSO A "MENTALIST" WHICH NOMINATES HIM TO BE ONE OF THE "MEDALISTS"!!. GREAT DOINGS & THANKS FOR SHARING.
Tu es un petit génie et un malin !Bien joué ,à mon avis tu dois mal dormir la nuit, bref le cerveau est toujours en mouvement !Fait gaffe, parfois faut débrancher !🤔🙄😂👍
Great idea! I’d just say engineer a way to use a stand off, or see if a regular stand off will work. burn up a lot of tips with it just flat against the metal like that.
@@TheMetalist I know this is a little late, but they make a sort of training wheel for plasma cutters to keep the tip away if your doing it on something like a positioner
Very cool idea that could be adapted for many applications there hand holding a torch even with a guide isn't good enough. Going to have to search out the build of the rotary fixture. My issue with this is the time and effort put into the build isn't worth it in most applications. I could see this as being helpful for garage production runs depending on what the parts are being used for. I'm also not a fan of plasma cut notchers in general. They don't really save much time. You can't properly weld those joints without cleaning up ALL of the dross and plasma cut edges. The traditional drill powered notcher is slower to cut but there is very little cleanup. Plus the adjustability can't be beat by anything close to affordable. Awesome video. Awesome idea. Keep being creative because even though I don't see this as being very practical I absolutely got something out of it.
It’s cool, but how does it work on full length pipes like a roll cage? I’ve been tossing around an idea like this but using CNC for the movements and rotation. But can’t figure out a solution if it’s pre bent tube like a roll cage.
THAT IS JUST PLAIN NEAT! Did I say that with enough gusto? And this video was uploaded on July 13, 2020 - did you just recently have this revelation and create the video? Are there any more at home like this one? That deserves a LIKE and a SUB.
Just a thought this would not work for a roll cage most of the time the tube is bent all ready but If you mount the spring arm torch on a tube and put it in the rotary chuck and the you could put a bent piece in a pipe vise and then slid the jig over the end and bring the chuck/spring torch to it.Just a thought.
this is great for hand rails. however only one end can be cut and the length is limited with out roller v blocks. but worth the effort if one does a lot of rails.
I wondered wtf you were doing when you started welding hinges together, now I'm impressed! people pay thousands for automatic pipe cutting machines, this is a genius little set up, well done
This is messed up. You had me with the pipe template. But I have to wonder what is with the file? No OD sanding drum for cleaning the slag? It should be some automatic thing. A die grinder that follows up the torch. Or a micro-mark angle grinder working the inside.
How would you go about cutting 3/4 inch conduit lengthwise about 8 feet, just one side (not cutting it in to two halves)? I need to cap off some metal sheeting on a utility trailer. Thanks
Can I buy one of those from you? My plasma cutter is a hypertherm. That is pretty damn brilliant! I was poking around on the computer watching all these folks smoking these hole saw drill bits drilling/notching tubing. I thought wouldn't it be easier to adapt a plasma cutter to notch tubing and voila! You sir are a few steps above the rest of us on the brainiac scale!!! I did have the vision just not the follow thru. What size/gearing/motor you got in the salad shooter? I mean tubing/shooter/turner?
@@TheMetalist Bike headTube process not bike frame, headTube is the mounting point from frame to front fork. Please help us , Manu people showing just taking tube ... But after that there are many steps involved in between before headset installation.. Thank you (mk568571@gmail.com) for more details if possible
Don't know how I ended up back here, but I reread my initial comment which I just edited. I don't know how Tig got put in front of torch tip. Anyway you just have to proof read everything three or four fucking times.lol
You're indisputably the GOAT! Quick moving video with no bullshit. Straight to the point and concise. Subscriber for life here!
We are stuck in 2020 while this guy is living it up in 3000. What a king ! 👑
Thank you for that nice comment 😅
@@TheMetalist DUDE this thing is awesome we still using disc saws here. Or notchers that do on only job, at no less than 240. Daaamn. A plasma cutter is around 150 bucks and your tool is genial you could even turn the tube yourself! And it cuts a lot of stuff I mean in the end its even less dangerous than the 350mm disc saw.
Малодец мужик. арегинально.просто и повторяемасть деталей по шаблону.хорошую идею кинул.хоть и для других задач.красавчик.
Dude, you outdid yourself again, this is so awesome! Love the creativity and the solutions. Smart and efficient. Thanks for taking the time to film this and sharing it with us!
Thank you 😊 ... you are welcome 😁
I watch A LOT of UA-cam videos and come across many great projects/ideas. This ranks at the top! Not only is it a genius idea, but seems fairly simple to make. Rarely do the two go together. Now….to make your motorized chuck.
ua-cam.com/video/bOetvXZ053Q/v-deo.html
Great idea! make the patterns double ended for more angles and put a spacer on the torch tip to get a little stand off so you don't burn up tips too fast.
Who gives a "thumbs down" to a video like this? Its genius. Great job!
Thank you 😊
Sir you are very cleaver and have a problem solving inventive brain better than most. I think you deserve a pillar drill. 👍
Thank you 😁
For notching tubes? 🤔
Work smarter, not harder.
These are the type of videos I like, no Stupid intros, no begging to subscribe and like the video. just good old information.
Great enginuity, not just the craftsmanship but video itself.
Thank you 😁
Pure genius. Everything you do it amazing
Thank you 😊
Insanely ingenious. Well done sir!
Thank you 😁
This is my first Metalist exposure. I've ranking you in personal top 3 favorites with Kwando and Urchfab.
Thank you 😊 nice 😁👍🏻
ты головой, работаешь не хуже чем руками! молодец! I like it
Thank you 😁👍🏻
Very clever. Your creative mind is endless in what you can visualize. Thanks for sharing. Joel......
Thank you 😊
Making the ally tube double ended Eg: 60 one end 45 the opposite end 90 and 75 on another piece use wing nuts instead of Phillips head screws . Cheers from a old toolmaker in Australia .
That a good idea angles on both sides😁 I just had them screws in the shop 😅
@@TheMetalist Thanks for the positive feedback I have yet to fire up my plasma welder .Not sure if it works upside down here in Australia .
Simplest are the best ideas.. brilliant coming along nicely 🙏🙏👍
Thank you 😁
Exceptionaly good cheap simple.
I agree with DVC, Absolutely genius! Man you have a serious gift! Thanks for the how to. Now mabey I can build my son that gokart.
Awesome 💪
Thank you 😁
way better than i was expecting and a bit cheaper than 60k+ cnc pipe cutters... i need to make one!
Try chalk dust as a form of lubricant at the end of the template tube. Won't melt during cutting if doing multiple cuts.
Thanks for the tip 👍🏻
Use "wing" bolts instead of phillips screws, easier.
Yes thats right have to Order some, i just had them in my shop 😅
@@TheMetalist Or just make your own.
Richtig gut! Perfekt wenn man mehrere gleiche Teile schnell fertigen will! 😃🤙🏻😎
Dankeschön, ja wenn man nur ein Rohr ausklinken will dann wär der Aufwand schon extrem 😂
I have always wanted to make a CNC one. Super cool execution! Great work.
Thank you 😊
This man is a wizard 🧙♂️ love the content my friend
Thank you 🙂
SIMPLICITY IS THE "KEY" BUT IT GOES GREAT ALONG A DASH OF IMAGINATION. OUR FRIEND HERE "THE METALIST" IS ALSO A "MENTALIST" WHICH NOMINATES HIM TO BE ONE OF THE "MEDALISTS"!!. GREAT DOINGS & THANKS FOR SHARING.
Thank you for that nice comment 😁👍🏻
Tu es un petit génie et un malin !Bien joué ,à mon avis tu dois mal dormir la nuit, bref le cerveau est toujours en mouvement !Fait gaffe, parfois faut débrancher !🤔🙄😂👍
Thank you 😁
Only need two bolts to hold it to the tube, also weld some 8mm round bar on them so you can tighten easily without having to use a tool
Great idea! I’d just say engineer a way to use a stand off, or see if a regular stand off will work. burn up a lot of tips with it just flat against the metal like that.
Thank you 😊👍🏻
@@TheMetalist I know this is a little late, but they make a sort of training wheel for plasma cutters to keep the tip away if your doing it on something like a positioner
Wow..now thats really cool..very smart thinking..great video
Thank you 😁
Wow, ingenious!😮
That is a really clever idea, I like it.
Thank you 😊
Very cool idea that could be adapted for many applications there hand holding a torch even with a guide isn't good enough. Going to have to search out the build of the rotary fixture. My issue with this is the time and effort put into the build isn't worth it in most applications. I could see this as being helpful for garage production runs depending on what the parts are being used for. I'm also not a fan of plasma cut notchers in general. They don't really save much time. You can't properly weld those joints without cleaning up ALL of the dross and plasma cut edges. The traditional drill powered notcher is slower to cut but there is very little cleanup. Plus the adjustability can't be beat by anything close to affordable. Awesome video. Awesome idea. Keep being creative because even though I don't see this as being very practical I absolutely got something out of it.
1:50 Use a piece of smaller angle bar to get lines parallel to center axis.
It’s cool, but how does it work on full length pipes like a roll cage?
I’ve been tossing around an idea like this but using CNC for the movements and rotation.
But can’t figure out a solution if it’s pre bent tube like a roll cage.
THAT IS JUST PLAIN NEAT! Did I say that with enough gusto? And this video was uploaded on July 13, 2020 - did you just recently have this revelation and create the video? Are there any more at home like this one? That deserves a LIKE and a SUB.
Sei un grande !
Incredibilmente semplice quanto ingegnoso !
Thank you 😁
Just a thought this would not work for a roll cage most of the time the tube is bent all ready but
If you mount the spring arm torch on a tube and put it in the rotary chuck and the you could put a bent piece in a pipe vise and then slid the jig over the end and bring the chuck/spring torch to it.Just a thought.
No practical reason for me to watch this video ....but def watched whole thing ....ingenious
this is great for hand rails. however only one end can be cut and the length is limited with out roller v blocks. but worth the effort if one does a lot of rails.
Bro! You are something else. GENIUS!
What's the name of that rotary tool?
Thank you 😁
The welding turn table!?
Always coming up with great ideas! Well done!
Thank you 😁
Cool, I’m subscribed all the way from Cape Town, thanks for showing me more uses for my plasma machine
Hi 👋 you are welcome 😊
Simple, cheap, adaptable. I like it.
Thank you 😊
Oh no! Now I'm going to have A.I. nightmares of the swing arm replicating itself.
😅😂
Did you DIY the rotisserie box if so could you send the link or where you got it p look please
100 💯 👍
Yes its a diy one 😁
@@TheMetalist can I find it on your UA-cam channel
@@kurtludwig4783 yes 😊
I wondered wtf you were doing when you started welding hinges together, now I'm impressed! people pay thousands for automatic pipe cutting machines, this is a genius little set up, well done
Magical! This is the way to notch.
This is what it is about.
Perfect!!
Thank you 😁
Very good, great idea, congratulations
Thank you 😊
whoa that's neat, so with a quiet plasma cutter and compressor, I can get rid of my saw. I hate cutting notches.
Idea worth million dollar❤️❤️❤️❤️❤️❤️👍👍👍👍👍
Alter das ist ja mega geil, das brauch ich auch.
Das bringt ganz neue Möglichkeiten 😂
😁👍
Now thats crafty... i dig it.. thanks for sharing
😀Show Man 👏👏👏👏 congratulations my friend idea brilliant 👏👏👏👏👏👏👍👏
Thank you 😁
How cool! I liked your metal saw!
Thank you 😊
Well done. You are giving me ideas man.
This is messed up. You had me with the pipe template.
But I have to wonder what is with the file?
No OD sanding drum for cleaning the slag? It should be some automatic thing. A die grinder that follows up the torch.
Or a micro-mark angle grinder working the inside.
This is very clever, well done
Thank you 😊
Makina senin icadın mı?
Harika
Huge fans over here at How2wrench!
Tha k you 😁👍🏻
great alternative to hole saws, thanks for sharing !!!
Awesome build.. very ingenious 👍🏽🇺🇸👍🏽
How would you go about cutting 3/4 inch conduit lengthwise about 8 feet, just one side (not cutting it in to two halves)? I need to cap off some metal sheeting on a utility trailer. Thanks
This video was in my recommendations. Liked and subscribed.
Thank you 🙂
New sub and wow, I might pinch your idea for the vice Mount table for the saw 💡👍
Thank you 😁 nice 👍🏻
Yes, that was worth the price of admission alone!
How thick can the plasma cut a DOM tubing
very impressive, thank you for sharing your ideas with us
What sort of black magic sorcery witchcraft is this?!
Watches video
Oh, right. I get it...
😅
Hahahaha damn wizards
What is that scribe guide thingy? I've got to have one of those!
The mesuring gauge?
Genius! May I ask what kind of drill bit do use when you drill steel?
Thank you 😊 HSS-CO bits
Man, I don’t weld or fabricate lol but I really enjoyed watching this!
Awesome 👍 😊
After watching this video I subscribed.
Thank you 😁
It's available for sale?
what brand is the pazma device and what power it has thank you
Its from stahlwerk around 30amp
Master of the spark arts 👌
Thank you 😁
Can I buy one of those from you? My plasma cutter is a hypertherm. That is pretty damn brilliant! I was poking around on the computer watching all these folks smoking these hole saw drill bits drilling/notching tubing. I thought wouldn't it be easier to adapt a plasma cutter to notch tubing and voila! You sir are a few steps above the rest of us on the brainiac scale!!!
I did have the vision just not the follow thru. What size/gearing/motor you got in the salad shooter? I mean tubing/shooter/turner?
Thank you 🙂 nice comment 💪 I made a video from my turntable hope you get all the answer from it 😁
Do you use grease on all of them? What kind of grease? Thanks.
Just on the last one 45° the torch stuck a little bit by moving along the template! Heat resistant grease but i guess regular would be also good 😊
You are not of this planet! Amazing brain you got there! How do u come up w this stuff?! Your like the slash of real metal
Thank you 😊
Your welcome! So much fun to watch u make this stuff
Dats cheatin'! I'm making one this weekend. I love you.
Nice 👍🏻Thank you 😊
Genial und faszinierend wie immer
Dankeschön 💪 😊
great idea, whats the thin line marker used towards the start?
Its a Edding 8850
Wow that works perfectly... very cool
Thank you 😊
Please make an oval plasma template, too
Just found your channel. Great work!
That's pretty slick
Very good idea, great job 😊
Thank you 😁
Are you able to 45 square tube with that?
It could work 😊 i have to Check it out
Awesome !!! Thank you for the inspiration.
Fantastic Demo ! Well done that man!
this gave me 2 great ideas! awesome work
...interesting and useful idea....Well done, Dirk!!! ;-)
Thank you 😁
Really appreciate..
Can you please do a video on how to make headTube process from scratch if possible...
Thank you
Thank you 😁 you mean something like bikeframe?
@@TheMetalist Bike headTube process not bike frame, headTube is the mounting point from frame to front fork.
Please help us ,
Manu people showing just taking tube ...
But after that there are many steps involved in between before headset installation..
Thank you (mk568571@gmail.com) for more details if possible
There is a project coming up 😁 i will show a little bit more Details in this case 😊 About one month from now
@@TheMetalist I'm waiting for that then,
Can I share a custom frame details...I'm from india
This is awesome. Also curious what band saw you use?
Thank you 😊
I was going to do this one day but then forgot about it. Thanks for making it!!!! Brilliant!!!
Smart and works well 👍🏻 I'm about to make one myself but how do you do when you have a bent tube?
Brilliant build! Clever idea, Thanks!
Thank you 😊
I didn't think the torch tip was supposed to come in contact with the material. ?
Am I missing something.?
Pretty sure that's a drag tip plasma cutter
@@adamc7779 thanks man.
I was unaware those were available.
Don't know how I ended up back here, but I reread my initial comment which I just edited.
I don't know how Tig got put in front of torch tip.
Anyway you just have to proof read everything three or four fucking times.lol
Is there a list of your tools?
I would like to share it in a Video 😊
@@TheMetalist That would be awesome man!
Yay! New video! 😁 Can I ask what brand of taps you use? I'm still using the hand ones, you know, 1 turn, half back.. 😒
Thank you 😁 i use Forum or Garant (Bluering) Maschine taps
Noble prize. Awesome
Thank you 😁