Це відео не доступне.
Перепрошуємо.
Bars Leak Head Gasket Fix
- Додати в
- Мій плейлист
- Переглянути пізніше
- Поділитися
Поділитися
Вставка
Розмір відео:
- Опубліковано 10 лис 2019
- My review
КОМЕНТАРІ • 113
Наступне
Автоматичне відтворення
Bars Leaks Block Seal Permanent HEAD GASKET FIX - How To Use And ReviewTodd's Garage
Переглядів 132 тис.
BEST! Bars Leak Fixes Blown Head GasketJoseph Frankel
Переглядів 612 тис.
Bars Leak Block Seal Permanent Head Gasket seal...will it work?Never Too Late
Переглядів 15 тис.
ВІКТОРИНА #37. EL КРАВЧУК ТА ВАСИЛЬ БАЙДАК х КУРАН ТА ВЕНЯ | НОВИЙ НАЙБОЖЕВІЛЬНІШИЙ ВИПУСК ВІКТОРИНИВетерани космічних військ
Переглядів 538 тис.
7 Days Stranded In A CaveMrBeast
Переглядів 56 млн
Колишній увʼязнений - про мотивацію воюватиСуспільне Новини
Переглядів 1,3 млн
ЗСУ в Суджі надали місцевій бабусі можливість вільно висловитися про путіна #shorts #суджа #путинАпостроф TV
Переглядів 825 тис.
People Say I’m Full of Crap, Well Watch ThisScotty Kilmer
Переглядів 412 тис.
Head gasket sealers head-to-head comparison.The Mighty Bluegill
Переглядів 122 тис.
Head Gasket Stop Leak! Does It Work?! We Put It To The Test On The Cheap Subaru Forester Project!MrSubaru1387
Переглядів 29 тис.
Learn How To Fix A Blown Head Gasket In Under An Hour For Less Than $50- Does It Workoxmanagain
Переглядів 1 млн
Bars head gasket fix.Danny's Auto Repair
Переглядів 3,6 тис.
THE Best Headlight Repair Method. Long Lasting, DIY Fix. Save Money!!CVR POV
Переглядів 620 тис.
This Jeffrey Epstein Story Will Send Chills Down Your Spine - Eric WeinsteinChris Williamson
Переглядів 4,2 млн
Bar’s head gasket sealant is the best! How to use and review on any vehicle!Rubicon Romp
Переглядів 5 тис.
Bar Leaks - Block Seal Head Gasket Sealant! This is Effective!fixedan
Переглядів 49 тис.
Битва умов. ❤️ПІДПИШИСЬ! Андрій Попик. чат рулетка.Андрій Попик чат рулетка
Переглядів 470 тис.
👊ЧЕРНИК: Все! Під Курськом НОВИЙ ПРОРИВ. Підходимо до АЕС? Путіна ПРИТИСЛИ. Готують ТРАНЗИТ ВЛАДИ?Сейчас
Переглядів 462 тис.
Втрачене дитинство | GOVOR TikTok #govor #shotsGOVOR
Переглядів 425 тис.
КУРСЬК, СПИШ? | Упс, а що трапилось #75Aleksey Durnev
Переглядів 775 тис.
How I Did The SELF BENDING Spoon 😱🥄 #shortsWian
Переглядів 35 млн
⚡️ "Пятки сверкали" аж до КУРСКА! "Кадыровцы" БЕЖАЛИ, оголив фронт!FREEДOM. LIVE
Переглядів 1,1 млн
ЛЕТНИЙ ДЕНЬ ТВОЕГО ДЕТСТВАSIDELNIKOVVV
Переглядів 1,6 млн
Бутылка Air Up обмани мозг вкусомКостя Павлов
Переглядів 2 млн
I got rid of the old coolant.Put new dexcool 50/50 with distilled water.Changed oil,and filter.Put new oil.Took the thermostat off.With engine cool,I poured in the Bars ..just like you said with heater on.No smoke..Engine runs cooler.Thank you so much.We need people like you,who try to help others.God bless you and your family.
Thank you for the comment! I'm so glad that it worked for you!!! God bless you and your family as well!!!
Loved this honest appraisal from an obviously honest man from USA. If I wanted my good product appraised you need to speak to this individual
God bless you! Many thanks from Sweden! We all pray that the good forces in America will prevail 2024!
Thank you! I used it today 2.7.2024 for my 2004 Porsche Cayenne. I hope it works crossing fingers.
Thank you, I spent $500 in fixing my van and the shop blew my head gasket. I was about to junk it for $200. You saved me.
Thanks for the comment! Hopefully your van will stay dependable for you!
thanks! I needed something to keep the truck going while saving up for the intake manifold gasket '87 F150 4.2L
Thanks for watching Exor!
I had a very small leak on the plastic side of the radiator, where one metal tube connects to the automatic transmission.
I patched it with regular acetic silicone (the transparent rubbery stuff) and after the first try it still leaked, however after the second re-patch I didn't notice any more leaks. Let's see how much that will hold.
It's a 1991 Chevrolet Lumina APV 3.1L TBI (later called Silhouette and upgraded to 3.4L, 3.8L and 4 speed tranny).
I replaced its defective PCM with a diy EFI (thanks Dielectric Videos channel for providing instructions). It's simpler than any commercial aftermarket EFI system; it only uses one Air Fuel Ratio map.
I got to a point where the engine idles okay but when revving from 2000 to 2500 RPM, the exhaust sounds bad and the engine seems like it lacks power. After crossing the 2500RPM barrier, it sounds normal and regains power.
Getting to this point, I had to modify the normal 2000RPM (all the way up) AFR of 13 or 12, to 6 (which is the limit of how rich the mixture can be). Letting it at 13 or 12 meant that the engine didn't even cross the 2500RPM - it was like a rev limiter, but the software only has a 4400RPM rev limiter.
I asked the developer of the software about my issue and his guess was that enriching the post 2000RPM AFR compensated for another fuel problem (either blocked or small hoses, obstructed injectors, bad fuel regulator, clogged filter or bad fuel pump).
I inspected the fuel pump and the pressure regulator for cracks, didn't find any; replaced the fuel filter... I don't have a pressure meter though.
works for me! good to follow the directions............ let it cool after running awhile. Run w radiator cap off - purge any air in the system.
Appreciate the video my dude. You definitely helped me out.
Put the exact same thing in my Subaru. Due to its small cooling system, I was suppose to only put in half a bottle. 6k miles and working fine.
Thanks for the info! Its definitely a good product to save some cash!
@Kaleb Cotnoir Dang. Sounds like you got a mess! Running great. I baby it now since I know how much head gaskets cost.....lol!
@@countryboyreviews I might add don't be tempted to put more than the recommended amount. My system is only 1.7 gallons which calls for half a bottle. The Subaru mechanic who recommended this to me specifically warned me about that.....js. Hope it helps!
@Kaleb Cotnoir Mycoolant was full so i drained about half a gallon. Put the bars in the radiator then topped it off.
@@arkansasgreg Thanks for the info !!!
My 12 valve cummims was weeping a little bit through a corner, used bars stuff and stoped the leak, its my daily and makes 550hp to the wheels, i figure as long as you dont have cross contamination, this stuff really is miraculous
Thanks Alberto
My coworker had a civic that kept pushing all the coolant into the reservoir but never pulled it back into the radiator so that lose of coolant would cause the car to overheat. Turned out he had a small head gasket leak he used this product and 6 months later it's still working good with no issue.
I used it on my crown Vic awesome job
Thanks for letting us know!
Thanks I used K seal it worked for 1 month but it slowed it down but now I'm loosing more coolant the good thing is that my oil is not creamy I'm loosing the coolant somewhere else in the block.. my next additive will be the product you used to be honest I was going to use it first but Kseal was cheaper on sale so I went with that.. long story short Kseal did not work long term for me.
Let us know how it works for you!
I used the block seal they have and it worked amazing!
Thanks for letting us know Tom!
Bought same bottle and poured in 2003 solhoutte
White smoke gone...so far so good
Thanks for watching!
I have a 2006 Ford Freestyle. I don't know anything bout fixing a car & I have never owned a Ford ...it was actually given to me. So huge blessing. I knew it been sitting for long time. The man said it needed the water pump replaced. But anyway I drove it down the Rd. Went dead few times. Figured it might need an alternator. But the durn thang , got home it was smoking like a freight train. Checked the oil mine looks like a butterscotch milkshake...I went last night and bought this stuff y'all are talking bout. So I do need to change the oil first?? Can anyone tell me if I should replace that water pump first. I'ma single mom and I don't really have the money to take it and have all this done. I'd appreciate any suggestions any of u might have. Thank ye for the video
I would definitely change the oil first for sure Keesha. You either have a blown head gasket or a cracked block , This may seal it up for you and save you a couple thousand dollars , definitely worth a try. Also if the water pump is bad it will need to be replaced but your car may just be overheating because of the Head Gasket.
I just used this on a 2006 equinox and it seems to be working
It’s pretty cool for a 3500 dollar car
Great vid. I heard the talk show guru talk about steel seal in the past with no failures. At that time it was $80 or $90 dollars. Thanks for putting up this video for a product that is much more reasonable to buy. You mention chevy 350 throttle body. Where to start with zero idle without constant throttle input? Thanks in advance.
Thanks for the comment! I put it in and let in run with the heat wide open... It really does seal up those gaps !
Thanks for the info!! Great video!!!
Thanks for watching!
That bad boy work foreal no lye boss
Yes it does lilboogie! Thanks for watching!
My minivan over heated on interstate and the coolant was pouring out of a crack in the tail pipe...I checked the oil oil looks fine. Thermostat works good..no misses...no leak around the engine...just the bad leak around the catalytic converter..I'm thinking it's a intake leak...I loose about a gallon or more of coolant after it get to warm temperatures..I tried blue devil but I think the leak is too big for it...I hope this works..I'm getting some today....
Hopefully it worked for you Joe!
So after the fix should you drain the coolant and replace with regular coolant to get some of that sealer out so it wont clog anything?
Definitely seen enough good recommendations. I guess I'll gamble the $$$ and cross my fingers.
Hi. I have a 2008 Rav4 with the 3.5L v6 engine. I have no symptoms at all, but I saw a little pink , (calcium like) dried patch. I don't know if my vehicle leaked at acertain time and stopped, or it a very minor outer leak. But I will try this and it should prevent and stop it in the tracks.
Better to be safe than sorry Daniel. Thanks for watching!
Omg it’s working so far this is a miracle
Thank you so much. I sure appreciate u!!!
Your welcome let us know how it goes! Thanks for watching Keesha!
Thank u! I love your truth bro!
Thanks ! I appreciate that
How about if all engine oil goes in to the radiator? This stuff can help?
Hey there , Thanks for the comment! Sounds to me like you have a blown head gasket... I would flush the radiator out and add fresh coolant and give this stuff a try, it may save you alot of money! Let us know how it works out...
Great video thanks , hope you get better
Thank you Danny !
My 2001 Aztek overheats. I used this product 6 months ago. Now it's overheating again within 10 minutes of driving. The coolant blows out my overflow. When I originally put the bars leek in I put it in my overflow. It plugged up my overflow tube. And half of it never got in my engine. Then it eventually blew out my overflow. This time I'm putting directly in my radiator. I think it will work and hold longer until I can afford a garage fix. What say you?
Definitely put it in your radiator Martin. I would give it a try it will more than likely work. Thanks for watching!
sounds like a bad RADIATOR CAP! faulty cap will not keep under pressure so coolant will boil and push out through the overflow. Just happened to me on 2 vehicles (i swappped over a bad cap) ......both solved w new caps. $6 per. seems the smaller spring failed for the draw back from the overflow resi..... so wasnt keeping under pressure.
What is a MOSSGITA truck ,forgive my ignorance?.
Lol , Mosquito Truck ... They spray for mosquitoes Doug ... Thanks for watching!
I see now ,hence the cloud of mist .Thanks for taking the time to reply .
😂😂😂
great video thanks
Still working after 4 years?
I like his southern boy character :)
Thanks James that means a lot!
He sounds like a idiot
Is it still holding up? How many miles has it run since you put it in the coolant?
Did you remove any of the spark plugs or disconnect any injectors on any of the cylinders that were burning coolant? Bar's says you don't need to do this, but Steel Seal (and Scotty Kilmer) recommend doing this.
No I didn’t and it still worked good Joe.
I have a small coolant leak otherwise my car runs fine. Occasionally it miss while accelerating. Bubbles in rad. Other then that no visible leak. Should I try this ?
I would give it a try asap !
@@countryboyreviews I went with blue devil pour n go. My mechanic friend helped me. I just asked him to flush system. When i got back he had already started process. Saying pour n go didn't need t stat removed bc also my system was clean from new rad and using water all summer. Bout gave me heart attack but it's done now. The idling already seems better no overheat. The real test in my situation will be if I have to add water daily.
@@thegreat-pl5gz Thanks for the info , keep us updated!
@@countryboyreviews still had to add a bit of water. Still smell antifreeze while driving. Only drove about 50 miles tho. My bro said he had to drive 1,000 miles b4 his truck improved. Will keep posted. No overheating w water tho.
Do the car have to be running when you pour the stuff in
Got that ol ,synthetic ol that is
Is it still holding up? Thinking about adding this to my truck.
I actually sold the truck to a guy in town and he said it is still going strong... If you use it correctly this stuff actually works. Give it a try and let us know how it did for you
1997 f150 4.6 got gunk in oil doesn’t overheat white smoke running rough should I try this not worth head gasket change
I’d definitely try it
I tried "Bar's Leaks Block Seal Head Gasket Fix". I didn't work for my Maxima 2012.
How do I determine if my coolant is dirty and needs flushed first or not ? Thank you!
You can drain some from the radiator and see if there are things floating around or it has alot of nasty particles in it , if it does then flush it! If not you should be good to go!
Hi i have a bmw n55 3.0 liter i went to the dealer they just cant find anything i have to put 1 time a week like 1 bottle of water will it help for my car please ?
I would definitely give it a try!
sometimes good to set this up with the thermostat removed - Ive heard.
Does it actually work
It did for me James
My 89 Sierra blows smoke out when I rev the engine what could be the problem would this help
It depends on the color of the smoke? If the smoke looks white then it could be coolant leaking into your combustion chamber which could mean a blown head gasket. If that is the case I would give this a try before I spent the 1000 plus dollars to get it fixed at a shop. This stuff actually works a huge percent of the time , just follow the directions and drive it some and see if it clears up!
Thank you brother!!
Glad it helped!!! Thanks for watching!!!
Is the stuff worth using 2015 ford fusion?
Yes it is Rell give it a try . Thanks for watching!
It worked for me took about two days for it to stop smoking.
Thanks for letting us know!
Why did it take 2 days
I used it but my heat stopped working .. maybe heater core got plugged! I have to see
Do you think it will plug the heater core?
That was a concern of mine but it didn't, I honestly think the odds are very low for it to clog the heater core because of the consistency of the mixture... Give it a try it might work for you and save you alot of money
I'll let u know if it works for me
Is it safe to pour a second bottle in radiator ? It fixed my car for about a day but the car started overheating again. I’m thinking one more bottle will do the job
I would try it for sure. Hopefully it will work for you! Let us know how it goes!
Country Boy Reviews will do !
@@MYDOGSAREHUNGRY how did it go
Anthony Jones terrible lmao I think I waited to late . But It did work for about 2 days
@@MYDOGSAREHUNGRY would your car ever overheat @ idle?
I just tried it I will let the people later coming soon
Didn't fix mine. !!!! Wasted $30.
Over heated and went. All over the ground... 1/2 hrs. After putting it in ....
Sorry to hear that , thanks for letting us know!
Guess it still works lol
Yes it does Willie.
MAGA