I used it in the wild tonight. In heavy nail beds. Found coins in spots I've detected over and over again. Last few times I went to these areas nothing. Hunted out.
@@tnsharpshooter8517 sensitive FT in the nails and park in the park. Both worked great. In my test garden Diving program hits the silver the best out of all the stock programs. It falses on the deep balls of crusty iron though. The stuff that's about the size of a dime.
Drop silencer to 0 and then put notch to 20. The way i take the machine is silencer down avrages the signal so if you have 50 signals a se ond recived from coil and 40 of those signals are id 6 and 10 are id 80 with high silencer it will down avrage to the 6 and knock out the 80s if you put it on 0 silencer then notch the id 6 out it should only let the higher tones thru so you should see the 80 id it seems silencer works below notch and really notch should work before its silenced. Hope this made some sense
I just upgraded, from im down grade back to .71 from 1.0. I replicated every test youve done today with each version. My results are exactly the same. 1.10 has fixed most if not all issues. Still needs some working out on our end to get familiar with the changes.
Sensitive full tones rocks! I have been using it pretty much exclusively since the 1.0 update (now on 1.1). To me it is hands down the best anti masking program this machine offers. Lets just think about the name "sensitive full tones" I have been running it in square high tones, and love the tones!! Incredible nuances in the tones... PS it still goes deep!
You are welcome. My videos not academy award winners using this hand held camera. I have 2 go pros. I like to be able to see in my camera screen what I am showing folks. Itty to do test pretty fast to keep videos shorter.
Can I download this now or it's only a beta test version? Seems like notch is working correctly in sensitive full tones but not in the other modes. Giving iron ID numbers instead of the higher id numbers of the coin needs to be fixed, there should be a way to bias toward the higher tones if there are 2 targets under the coil.
I was surprised that nothing came up in the VDI or sounded off when notched until it was set closer to the VDI of the dime. Glad i was not the only one that experienced that. Thought i went deaf and blind for a second 😂
Do you get the same results if you switch to Pitch starting from Sensitive FT? If so, why would XP make the program different from the Sensitive program??? Kinda the same thing with Beach programs using Pitch vs any other type of signal selection- Pitch is simply more stable on the salt water beach.
Great test. I use beach mostly, but do go inland when I can and this makes me think twice about even setting a low notch, maybe just use the tones to discriminate and put up with a little audio fatigue. I’d rather hear more crap than miss targets altogether. Growing pains, but Come on version 1.2 !! 😂
SS try turning FT TID on and off over a challenged target and you will see something (v1.10). I found the old 07/08 showing with it on, then with it off the TID would jump up into the 80s... I wonder if that had something to do with all the high numbers (falsing) on version 1.0, as it was off by default on that Release. The target ID was 88 for the masked coin I used next to a rusty bolt. Any program seems to act the same way.
I did turn fe tid on and off in the video with fast and sensitive. With notch of 00-20. No signal. But I do get high using sensitive ft. With fe tid off or on with not h of 00-20. Before I did video I checked sensieve ft with fe tid off and on no notch and all I get is loser single number Ion dime. Not h out iron range then start getting 80# when sweeping.
@@tnsharpshooter8517 I used sensitive ft the first day with 1.0 and liked it, never had any complaints, I dug some old fence wire that falsed but all machines do
I appreciate all of your work and effort. I watch all of your videos. Thanks Tn.
I used it in the wild tonight. In heavy nail beds. Found coins in spots I've detected over and over again. Last few times I went to these areas nothing. Hunted out.
When you say used. What program did you use? Sens Ft?.
@@tnsharpshooter8517 sensitive FT in the nails and park in the park. Both worked great.
In my test garden Diving program hits the silver the best out of all the stock programs. It falses on the deep balls of crusty iron though. The stuff that's about the size of a dime.
You are looking at a remote that has had a wholeeeeeee lot of buttons mashed on it. It still works. Lordy!
Sensitive FT might be a good program to check those single digit reporting targets found with fast, general, sensitive.
Thought I would share.
Drop silencer to 0 and then put notch to 20. The way i take the machine is silencer down avrages the signal so if you have 50 signals a se ond recived from coil and 40 of those signals are id 6 and 10 are id 80 with high silencer it will down avrage to the 6 and knock out the 80s if you put it on 0 silencer then notch the id 6 out it should only let the higher tones thru so you should see the 80 id it seems silencer works below notch and really notch should work before its silenced. Hope this made some sense
Results using nickel as dime was used very similar. However nickel reads 80.
I just upgraded, from im down grade back to .71 from 1.0. I replicated every test youve done today with each version. My results are exactly the same. 1.10 has fixed most if not all issues. Still needs some working out on our end to get familiar with the changes.
What? You mean my tests are not bs? Really? Lol
TnSharpshooter I have the utmost respect 🙏 for all the testing and information you bring to this community, Thank you Sir!
I know you do. Just some folks think these tests show nothing. Their loss. I suppose.
Sensitive full tones rocks! I have been using it pretty much exclusively since the 1.0 update (now on 1.1). To me it is hands down the best anti masking program this machine offers. Lets just think about the name "sensitive full tones" I have been running it in square high tones, and love the tones!! Incredible nuances in the tones... PS it still goes deep!
Thank you for your time. Great demonstration
You are welcome. My videos not academy award winners using this hand held camera. I have 2 go pros. I like to be able to see in my camera screen what I am showing folks.
Itty to do test pretty fast to keep videos shorter.
Im not a 100% but i think they left sens ft as it was in 1.0 . please correct me if wrong .
Can I download this now or it's only a beta test version? Seems like notch is working correctly in sensitive full tones but not in the other modes. Giving iron ID numbers instead of the higher id numbers of the coin needs to be fixed, there should be a way to bias toward the higher tones if there are 2 targets under the coil.
I was surprised that nothing came up in the VDI or sounded off when notched until it was set closer to the VDI of the dime. Glad i was not the only one that experienced that. Thought i went deaf and blind for a second 😂
Looks like you notch out iron .ID range target I.d comes in. Granted
ID skewed due to ferrous effects.
Using fast and sensitive even with iron TID on or off no help with ID sweeping with no notch giving ID above 6. No ID in the 10 plus range at all.
Do you get the same results if you switch to Pitch starting from Sensitive FT? If so, why would XP make the program different from the Sensitive program??? Kinda the same thing with Beach programs using Pitch vs any other type of signal selection- Pitch is simply more stable on the salt water beach.
Thank you
Great test. I use beach mostly, but do go inland when I can and this makes me think twice about even setting a low notch, maybe just use the tones to discriminate and put up with a little audio fatigue. I’d rather hear more crap than miss targets altogether. Growing pains, but Come on version 1.2 !! 😂
SS try turning FT TID on and off over a challenged target and you will see something (v1.10). I found the old 07/08 showing with it on, then with it off the TID would jump up into the 80s... I wonder if that had something to do with all the high numbers (falsing) on version 1.0, as it was off by default on that Release. The target ID was 88 for the masked coin I used next to a rusty bolt. Any program seems to act the same way.
I did turn fe tid on and off in the video with fast and sensitive. With notch of 00-20. No signal. But I do get high using sensitive ft. With fe tid off or on with not h of 00-20.
Before I did video I checked sensieve ft with fe tid off and on no notch and all I get is loser single number Ion dime. Not h out iron range then start getting 80# when sweeping.
Interesting 🤔
What about gen.,fast,sens. In v1.00? Will they pick up in 1.00?
Hmmm. Try and see.
I wonder what you would get using Deep H C?
I may show tomorrow James.
So the one program that kept 1.0 silencer does the best now
Sensitive FT was setup somewhat different in version 1.00 vs other programs I think.
@@tnsharpshooter8517 I used sensitive ft the first day with 1.0 and liked it, never had any complaints, I dug some old fence wire that falsed but all machines do
Hmmmm
Hmmm.