Dear lord that is huge! If need be i can thin it out a little bit or add some sort of bevel to the parts of the body that aren't around the pivot point if requested (although I'm not sure how well it would print like that). The only modification I made was to thicken the outside portion of the mag catch bar by 2.5 mm. Thank you for showing that it still works as intended.
@@kurticus yeah that's not a problem. I can make a few iterations this afternoon and I'll email you the thingiverse links since UA-cam doesn't seem to show my comments with the links in them.
@@kurticus Alright excellent. I have included a 1 mm, 1.25 mm, and a 1.5 mm thickened magazine catch bar with both the STL and STEP files that have all been included in the original link.
There's a reinforced mag catch stl on thingyverse It's a hollow design to place an steel bar on it I believe it uses the same 3mm bar from the firing pin
Hey if you don't mind me asking does that shockwave blade just attach using that screw towards the front of it. The original FGC9 MKII stock attaches at the hole in the back. Have you had any issues with it moving around on you?
You can use the screw hole but that technically changes the pistol to a SBR. The trigger can not be more then 13 inches from the end of the brace. I used super glue and that bolt in the front to hold everything still.
Dear lord that is huge! If need be i can thin it out a little bit or add some sort of bevel to the parts of the body that aren't around the pivot point if requested (although I'm not sure how well it would print like that).
The only modification I made was to thicken the outside portion of the mag catch bar by 2.5 mm.
Thank you for showing that it still works as intended.
😂😂 it is pretty big. I think if you only add 1-1.5mm it would be a bit more aesthetic. If you want to try anything else send it on over
@@kurticus yeah that's not a problem. I can make a few iterations this afternoon and I'll email you the thingiverse links since UA-cam doesn't seem to show my comments with the links in them.
@@turkey1099 just got the thingiverse link
@@kurticus Alright excellent. I have included a 1 mm, 1.25 mm, and a 1.5 mm thickened magazine catch bar with both the STL and STEP files that have all been included in the original link.
@@turkey1099 awesome stuff man I have another Glock on the printer but it should be done tomorrow night, so I'll print them then
Looks great, love the color scheme. You can do so many different builds from this also
What builds?
Thanks I based the colors off of 3d print general. He has an awesome FGC 9 video
I printed the mag catch in ASA, holding up well.
There's a reinforced mag catch stl on thingyverse
It's a hollow design to place an steel bar on it
I believe it uses the same 3mm bar from the firing pin
Hey if you don't mind me asking does that shockwave blade just attach using that screw towards the front of it.
The original FGC9 MKII stock attaches at the hole in the back. Have you had any issues with it moving around on you?
You can use the screw hole but that technically changes the pistol to a SBR. The trigger can not be more then 13 inches from the end of the brace. I used super glue and that bolt in the front to hold everything still.
Why is the gap between your upper snd retainer bigger then my hopes and dreams
Thanks for sharing Kurt. Did you make your own barrel?
Parts kit, look up floral goodtime chimes
How did u get the specs
No finding for svt9???
Can you please hint me where you found that brace ..I can’t find it anywhere
I just looked up FGC9 brace found it on thingiverse
Based
Are those irons printed?
They are from a hk416 in .22lr. Not printed, though you can print similar irons for cheap
Where do I get the files I just ordered a printer but not sure where to get files from
Ctrlpew.com
im a freeman sbr for me
Length of pull is a irrelevant as that is a brace and not a stock this is a big misconception on the Internet
Agreed.
I printed the blade in wood.
Where did you find the blade..it’s been killin me
www.thingiverse.com/thing:5028717
Im fairly cofident to be legally be considered a pistol brace it needs the strap
Incorrect just type in pistol brace online plenty do not have the strap. Ex Odin Works and Shockwave Blade