Beretta A300 ultima patrol Zhukov heat shield combo, case club case
Вставка
- Опубліковано 25 кві 2024
- Beretta a300 ultima patrol, Zhukov handguard Ithaca police special, and case club 3 gun case
Items on this gun
Limbsaver buttpad
Specter gear 5 shot hogue stock shell holder
GG@G charging handle
GG&G RMR mounting plate
Holoson 507c green dot
Beretta pro lifter
GG&G Zhukov Magpul handguard
GG&G heat shield fitted for Zhukov handguard
Olight Odin mini
Strike industries mini handstop
GG&G metal magazine tube cover w/clamp
Amazon 25 shot shell holder sling
Amazon M-LOK QD
Aero precision lower with bear creek left side charging handle upper
Athleon Midas 1-6x scope
Ithaca police special shotgun 1978 slam fire hero
Veeeery nice set up sir! I like it all!!👍🏿👍🏿
Thanks bud!
Or buy gun safe set up for your truck or SUV and carry all your necessary gear with you. Hell of a lot more gear and ammo that way.
1:21 butt to tip 😂
Nice setup though!
Thanks bud
Nice set-up! What kind of sight picture do you have with your iron sights thru the HS507C and RMR mount?
I use the 32 moa circle on the 507c not the 2 moa dot but it co witness very nice , I wear glasses and the rear ghost ring circle was bothering me so I cut the top of the circle off of the rear beretta sight, the half circle helps me aling with the front sight well, the GG&G rmr mount plate is designed to cowitness the 507 and I think they did a good job
@@Timcanniff311 I really like the stock iron sights on my A300 UP, but I'm putting a Holosun SCRS MRS on it (the 507c was my second choice). I wanted a 1/3 co-witness set-up, but I don't think that's going to be possible with the SCRS. It comes with a high picatinny mount more suited for an AR that's just too high for the A300UP. I bought a 3rd party lower mount that works pretty well that I think I'm going to be comfortable with.
@@markn4526 what might work with that sight is the mesa tactical Urbino stock with riser, it was just released on Monday for the 300, than the sight could be on the pic rail, and the riser on the stock will allow you to see through it, it is a pistol grip stock if you don’t mind those, I put a sig Romeo from my AR on the a300 and it was way to tall to use with the a300 stock
I just got my first AR with is the IWI Zion 556NATO im looking to pick up the A300 next than for my third gun a AK 47.
If you are in the market for a semi auto the a300 is a fantastic choice, best value for the money, as is I have about 2100$ into my a300, but in original configuration it is still really nice
@timcanniff311 I'm definitely going to get this box want a similar set up if I need to pack up and leave.
@@Tiger24kicks in my mind it’s the perfect setup if you need to leave in a hurry, that’s why I got ammo knives and some tools in there as well but it’s heavy but manageable, I do have a separate video just on the box itself
Dude don't bunch up any of you guns like this. Too easy for thief to walk off with all that. Why the hell package an AR and an ak and other stuff seriously. Hide your stuff all over the house. A gun safe can be cut open in less than 1 minutes with a skill saw and carbide blade. I kid you not
@@earldelsanto ya your right when I do go on vacation I’ll put the guns from the portable safe into my big safe, but if someone really wants to get into something they will unfortunately
did you have to modify your handstop at all? I have been trying to figure out if you could actually use the bottom slots. Some people say it interferes with the piston and doesn't work. Some people say with the 1301, they have shave the screw down and it works... any thoughts?
The handstop I have is the strike industries mini handstop , the hardware that came with the handstop I did not shave the screws down, my action runs smooth I don’t hear any scraping of any kind, now GG&G suggests that you check your screw length so there is no interference, with whatever you mount on the bottom, in my case with this handstop there is not an issue
@@Timcanniff311 That is great - I have been looking around trying to find an answer for weeks. It wasn't until I saw your video today that I decided to order the zhukov. Planning on putting a emissary handbrake on it - may have to do some modification. Thanks.
@@EthanJones-kd4qw that’s a cool handstop, I put on my handstop before the Zhukov was installed on the gun than you can see if the screws are longer than the M-LOK nuts, if you got the money and like the way the heat shield looks buy both from GG&G save on shipping, I think GG&G is the only company that sells the handguard specifically for the A300, plus when it arrives I’ll be putting out an upgrade video with the pistol grip urbino stock
Total badass setup . Have you had any issues with a weak mag tube spring ? If so what did you replace it with ? Also where did you find the limb saver recoil pad . I really hope someone makes a replacement stock for the a300 . I know it won’t be easy but I hate that cheap hollow crap it comes with. I absolutely love the magpul stocks . Hope magpul can pull it off
I’ve had no issues with my spring so far and Nordic components makes a spring for it, and a pistol grip stock exists for the 300 I have a video on my channel it’s from Mesa tactical, it just came out 2 weeks ago, Magpul can’t make a SGA stock for it due to the angle of their grip but the Mesa tactical Urbino stock is nice, and the only other option besides the beretta buttstock, I found the limbsaver buttpad on Amazon, it was a beretta limbsaver not specifically for the a300, but it fit perfectly
@@Timcanniff311 thanks . lol I’m shit out of luck it seems with the stock . Not fan of the pistol grip . May just be LTT 1301 time
@@bige2259 the 1301 is the best shotgun in existence and totally want one but I’m 2400$ deep into the 300, and honestly it’s a fantastic gun, I really don’t need the 1301 after I’ve tricked this one out, the Magpul stock looks awesome wish it could fit on the 300, and if Magpul can pull off their stock for the 300 I’ll buy it, I think beretta makes a different stock for their hunting version of the 300, they also have a kick off system stock
Out of the box, I had to buy a Nordic spring due to the last round, which would FTF very often. About 150 rounds in and it hasnt happened. Just cut it to 14 inches from the end of the tube up
@@jakethesnake1245 I’m still using the stock spring but I did take out the end cap out of the magazine tube, and just use the tube cover as a stopper, but I should buy that Nordic spring
You A300 looks great with the new furniture! Question for you: what's your preferred self defense ammo for the A300? I just got mine and I'm trying to see what others are shooting.
I have a variety of stuff , if I had to use ammo in my home I’d use birdshot for the reason of my kids in the home, but buckshot would be the next best thing, birdshot and less than 10 meters will still kill someone, beretta did all the testing with federal flight control double 00 buck they say it’s the most optimal shot with the choke installed that comes with the gun
I run same black aces tactical load. 1450 fps oo buck . 37 dollars per 25 loads. Hot stuff. Especially for break in. If you can set yourself u can unload 8 rounds faster than any semi auto. Sounds like a machine gun. Try it out. I got my /a300 just this morning
@@earldelsanto you will like the 300 over the black aces I’m sure, I don’t know to much about those black aces, they are Turkish right?
This is so amazing, to get a set like this what will it cost?
Well the case was 260$, the Ithaca shotgun was 1200$ when I bought it, the AR was around 1500$, the beretta semi auto with all the goodies I have on it was around 2000$, all the ammo I’d say would be about 100$, the 1911 was 500$ when I bought that, in my opinion priceless if you need something like this in a emergency, I got everything I need to protect my family, so over time I got about 5000$ into this setup of course you can get different guns cheaper than what I have in this video but the case is what brings it all together, I have a video on the case itself and what I did with it versus what it’s marketed for. You could buy a AR on the cheap end of the scale for 500-700$, a Remington 870 shotgun would cost 350-500 depending on if you buy one used or new, you could buy a Taurus pistol for 300$, rough estimate on those would be 1500-1700$ with guns and the case, it’s really what you want to spend and what type of firearm brands you like, sky’s the limit, I saw this case and was like that’s the case I need for a SHTF situation, and I bought it for when I retire and travel it’s the perfect case to hold guns you need a rifle, shotgun and pistol
Where did you order the pro lifter? I tried ordering it from backcountry but its has been out of stock.
I ordered it from beretta Italy site it took a few weeks but it finally showed up, it’s a part often out of stock, maybe due to the 1301 mod 2 now using them , I just looked on the beretta site and it shows out of stock, maybe do the notify me email thing and hope it comes into stock soon cause it is a very awesome addition to my patrol. Forgot to mention this was about a year ago when I bought the lifter
What model limbsaver butt stock? Don't see a model on their site for an A300.
In the drop down menu for the Urbino stock you can choose the stock with riser/no riser, or mesa tactical buttpad or limbsaver buttpad
I’ve burned my hand on shotgun barrels before . However , I usually put a few thousand rounds through any gun to see if it needs mods to accommodate my body or hands or shooting goals. I love the idea of a heat shield but I just got the A300. I want to shoot the crap out of it and take a shotgun course with it before I make a change. Did you burn yourself before you put this on?
I didn’t but I had gloves on and after about 40 rounds the barrel was hot, I’ve been a shotgun guy for a long time and just know how hot barrels can get especially with semi autos, even after a few minutes it’s still hot, than you go pick it up that’s when I’ve burned myself before, and the second reason I got it is that is just looks badass
I WANT to get the zhukov heat shield and handguard but I'm not sure if I can justify the price
Ya it’s not cheap over 300 for both with shipping, but it is nice when you fire 50 rounds down range and not burn yourself, plus it look badass! Briley is going to be coming out with a handguard as well but that will be as expensive as the 1301 briley handguard which is I think 350$
On sale today for 230.
@@jamescruse3544 my Zhukov broke I have a video on it, I returned it and got the briley handguard
That looks great !!!very nice mods you have there…do you have a video on the install of the hand guard?
No I don’t but it comes with detailed instructions on how to do it, it took me about 5 minutes to do
@@stacymiller2733 so you’ve already bought both the handguard and heat shield I’m assuming, I didn’t even mess with removing the handguard at all just slid the heat into position
Finally got it lol thank you
@@stacymiller2733 it’s looks really nice when put together in my opinion, but I might have to get the briley handguard when it comes out
I’m really liking this I added some DIY Talon grips on the hand guard for more grip
Do you find the heat shield very affective? Also, very nice police special! Reminds me I need to get mine back from the gunsmith, a nickel model, which I see you also have videos on, haha.
Yes heat shield is affective, you start blasting rounds down range the barrel heats up quick, I also like to use the C grip so I know I won’t burn myself with the shield on, I’ve been an Ithaca fan for a very long time now I got the police special that nickel plated 37 a 2013 defense gun and a stakeout
Forgot to ask why is your police special at the gunsmith?
@@Timcanniff311 Mine has had some pretty bad issues with extraction since I got it a couple years ago. needed a chamber hone/ new extractor spring and extractor IIRC. At some point I need to get my hands on a new slide tube assembly and have it refinished to match, because mine is actually cracked. Been a real shame, I haven't been able to properly enjoy it for a long time, and it getting it fixed got back burnered for a good while.
@@Timcanniff311 Good to hear the heat shield is effective. It really looks like a must have for the Zhukov handguard, if for no other reason than making the lines match up better.
@@InvidiousIgnoramus my friend has a m&p with extraction issues we bought a new extractor and honed the barrel, but still won’t extract shells he needs a new barrel but finding an 8 shot barrel is a problem
You wouldn’t get very far carrying all that weight, case is a look at item .
Wouldn’t carry it , it would be in my truck, if SHTF it’s not a carry able item your right but in my truck it would be fine, ditch the case and take what guns I’d need
Exactly
In the truck your a target harden you fortress you home. Food shelter everything you need to live in comfort screw that on the road cowboy crap
@@earldelsanto I agree actually my family owns a business about 3 miles from my home, a giant concrete warehouse that’s where I’d go to, not driving around for no reason, we got food water and weapons and tools at the warehouse
That survival suit ass full of rifles and ammo and tools must weigh what 80/ pounds plus. Dam dude seriously you back in gonna hurt. You have all the crap in one box to make it eazy to steal. Lol
Oh she heavy I didn’t weigh it but it’s close to 70-80 lbs, but it does have wheels! it’s mainly for when I start to travel so I got all the guns in one box, but I got plenty other guns