Nitro Engine Powered 3D Printed RC Airplane. Full Build. DIY RC Airplane.
Вставка
- Опубліковано 1 січ 2025
- Can the LW-PLA 3D printed designed for electric motor be used with an RC model airplane nitro engine?
The original design is a rear wheeled and electric powered model airplane.. I upgraded for nitro engine and nose wheel.
Original 3d Printer Files: www.eaglercmod...
My upgrade 3D Printer STL files: drive.google.c...
MORE DETAILS: www.rcpano.net...
180cc Fuel Tank: s.click.aliexp...
Silicone fuel tube (3x5mm): s.click.aliexp...
Micro servos: s.click.aliexp...
Radio control: s.click.aliexp... or s.click.aliexp...
Glow ignitor and charger: s.click.aliexp...
9x6 Propeller: s.click.aliexp...
OS 25FX 4CC Engine: t.ly/pZqY
ESUN PLA-LW filament: s.click.aliexp... OR s.click.aliexp... OR s.click.aliexp...
Spot welding machine: s.click.aliexp...
Nickel belt: s.click.aliexp...
Charger: s.click.aliexp...
CG: 65mm (From the wing leading edge)
Thanks for watching. If you want to support my channel, join.
/ @kendin-yap
Full Flight Video (No Edit): • Nitro Engine Powered 3...
My Web Site (KendinYap): www.rcpano.net
All of my videos : bit.ly/2Z9QVYK
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.
#rcairplanes
#modelairplane
#rcnitromodel
*( MASTER LAYANGAN )* IKUT NYIMAK TUTORIAL PESAWAT RC. 🙏👍👍👍👍
from start to finish, faultless, bravo,
Nice glow powered airplane!
Superb! Superb! Superb! Suprb! 👍👍👍👍
Amazing! Love the design engineering. I built a 3D printed Ercoupe. It was so thin and fragile. It flew okay on the maiden, but when I came in to land I was offside of the runway and hit a weed. The model crumbled. That was my first and last 3D printed airplane.
Well done …nitroengine is a plus in this hobby!
@@thegamereviewandreallifech1910well, the real thing would be you getting no in it and flying it
You are great
You are humble
You are Miracle
You are Made For Planes
You are My Hero❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤🎉🎉
Awesome.🎉
Very good job
Building the old fashion balsa and plywood kits is more relaxing and rewarding...best engine ever was the OS 40 FSR...... unbeatable and last for years
13:39 That plane at the back 😂
operator drink too much oil 😆
@@mattmuslim 😂😂😂
Great video, greetings from Colombia
Thank you very much!!
Nice build and maiden.
Tertemiz işçilik, maşallah hocam emeğinize sağlık, tebrikler 👏👏👏
Salamun alaykum! Qardashim Uzbekistandan salamlar olsun.Tashakkurlar sana.Allah ishigni ummat foydasiga qilsin. Amin.
Well done,i like it alot😀👍🛩️
FPV on this would be sick
Excellent video! 👍
Cool video!! Love your work! My only two things that I saw were 1) I loathe grub screws on main control surfaces, e.g- Elevator and Ailerons. I know some people swear by them but that is just my opinion. 2) Slightly heavier bands holding the wings on. And always put more on than you think it needs.
Gerçekten harika , insan denememek için kendini zor tutuyor 👏
Eline sağlık üstad. Gayet başarılı. Uygun bir zamanda deneyeceğim bende :)
big fan
Wow! Wonderful content .
But the engine will be heavy
Fabulous
It might be a good idea to put foam around the tank so as to mitigate the possibility for fuel to foam up.
Good job, very nice ;-)
Perfect construction & flying ❤❤
Inspirational video 👌👌
Как Всегда Лучший👍💯
Дуже гарний літак!
La prochaine fois je te conseille d'utiliser un moteur électrique c'est moins de dépenses pour le carburant
This is not a fuel cost issue. Fuel engine models are much more fun for me to fly.
Nice Job ❤❤❤❤
Bravo ellerine saglik.👏👏
It would seem that this plane would be very nose heavy with the engine and everything at the front. What’s the Center of gravity. Great video but leaves a few of the steps out
Üstad emeğine sağlık çok iyi bir çalışma olmuş yine.
Bro pls make the fighter jet video pls❤❤❤
Great video and model. I can't seem to find the link to purchase this plane. What is the name of this plane and where can I download it?
Elinize emeğinize sağlık.❤
Amazing
Çok güzel hocam elinize sağlık
Superb !!!
You r perfect really loved it
Yine çok iyi olmuş reis eline sağlık
Hocam yine döktürmüşsünüz , printer baskı süreleri uzun olmasa cidden güzel seçenek. Hocam ileride zagi tarzı uçak yapmayı düşünüyor musunuz.
Abi çok iyi bir video olmuş elinize saglık devamını bekliyoruz
Very nice ❤️
Amazing 👍👍👍
can you please show all the connections of recievers and all.
That's a neat idea, takes scratch built to another level. Im curious to see how the plastic will hold up to model engine fuel and exhaust over a period of time.
Beautiful engineering but it must weigh a lot??
Compared to the electric design, it weighs about 350g more. Flight weight for nitro engine is 1750gr. This is not bad. Reasonable weight for a fuel-engined, 130cm wing length model.
hey great plane , do u have the stl file fore the fuel tank part to hold it in /.? thanks
Nicely done, although it’s a little concerning to have your stab held on by a single magnet and micro servos on a nitro is unusual - then again 3d printed nitro is too…I wish you many happy landings. I love the idea of using an ultra modern technology to create something nostalgic
the stab is also held in place with a 3mm Carbon Fiber spar that runs right through the H-stab .. its done this way so it can be easily replaced in case of damage, up to now we haven't had any problems
Nice video you made. What is the flying weight? Give us detailed info, about servoes, motor, stabilisation...
Thanks. Below of video is the link for the details (Click "more" or "show more"). flight weight etc. There is also a link for the servos. Stabilization??? If it's about whether the plane is stable, yes it is a stable model. Typical trainer model. If you are asking if there is a gyro support.. No, the flight is completely manual. I don't use gyro assisted flight controller on airplanes.
Nice job mate, id go for a smaller engine for that maybe a os max .15 would suite it
Thanks. I'm not sure if 15 will be enough.
Great job hocam i have problems printing lw pla the layers wont adhere and rip apart and the pieces are not generally strong what might be the problem?
Does anyone know how this LW-PLA holds up wit temperature? I switched to PETG from PLA because the PLA warped in the sun. PETG is too heavy for most RC airplane applications. How is LW-PLA?
LW-PLA is also affected by the sun. There is no problem during the flight. But it should not be left in a fixed position under the sun for more than 10-15 minutes.
Hocam elektrikli motor benzinliye göre daha güçlü deilmi
Evet genel anlamda doğru. Ama buradaki önemli fark güç konusu değil. Bir hobi olarak düşünüldüğünde yakıtlı motorlu modellerin keyfi çok farklıdır.
Great great great job!!! I had been looking for a 3D printed model aircraft for a nitro engine for a long time. Is it robust enough to withstand vibration and normal use?
Thanks. . Yes, I created a reliable structure with appropriate updates for the 0.25 nitro engine.
@@Kendin-Yap In your opinion, is the 0.S. 0.15 LA engine sufficient for this model?
Mükemmel video. 👍
eSUN’un LW PLA’sı mı bu? Motoru nereden temin edebiliriz?
Evet ESUN. Zaten TR de başka marka henüz yok malesef LW için. Motoru "OS 25FX" ismi ile aratın hem yerli satıcı hemde dışarıdakiler ilk sıralarda çıkıyor.
@@Kendin-Yap Teşekkürler, ilginiz için
Superb.
Great video. Will be interesting to know how the plane holds up with glow power. What printer did you use to print the parts, especially the ASA pieces.
Prusa MK3 as shown at the 34 second mark in the viideo.
Oh I found the link under the "more"
Make a Arduino Uno flight controller for drones .... Please
Abi 3D yazici ile airsoft yap lutfen
Hocam baskılarda hangi marka filamenti kullanıyorsunuz ve nozzle çapınız nedir ?
Standart nozzle (0.4). Esun kullanıyorum. Bu uçak LW-PLA dır. Zaten Esun dışında LW-PLA Türkiye satılmıyor maalesef.
@@Kendin-Yap teşekkür ederim
Very nice
I really like your video
And also I am working on rc trainers aeroplane by watching your video
But it has problem , I have no electronic components like transmitter and receiver or etc.
How much total weight without fuel?
Is it possible to put Pixhawk flight controllers in old 4 and 5 channel gassers? I have some from the mid 80s hanging in the barn. Pushrod throttles. Gas engines don't have the sensitivity and quickness of electric with ESC. I want the gyros and self leveling stability we have today put into some antiques though. It was such an unforgiving hobby back then. Has anyone retro fit one?
hocam çok iyi iş çıkarıyorsunuz elinize sağlık da free 3d stl olanlardan yapsak biraz :)
Great work hocam. where can I find the laminated foam you have been using in your previous projects, you have never left a link for it
. I just wanna add that "I appreciate you and your work'
You can search with the definition of "Kraft Foam Board". If you are in TR, you can search by the name Fotoblok.
Have you plans to do a bigger model with a gas engine? Maybe 20cc or bigger?
Is it beneficial to make oiur own tx rx (homemade) for rc plane as a beginner or should we buy the commercial one and practice flying. I am an beginner
Buy a commercial radio system, dont waste your time on DIY, dont buy super cheap either, get a Radiomaster Tx16s, you will end up buying one anyway and its not worth wasting money on a cheaper radio which you will end up replacing very quickly.
Luar biasa.... ❤
Nice build but the question is how long will it hold up after the nitro from the exhaust hits the wing and fuselage? Interested he see after how many flights it will structurally fail? I used to use epoxy spray paint back in the day for nitro projects on silk skins but not sure how that solvent would play with PLA, LW-PLA or PETG.
I ran tests on a part (Painted LW-PLA) before making the model. For approximately 2 weeks. No problem occurred. But will there be a problem for much longer periods of time? I do not know.
@@Kendin-Yap I would think it would be ok as long as the exhaust oils are cleaned up after each flight. I have a balsa airframe with monocote heat shrink covering that is much thinner and have had no problems with the exhaust spray. I clean up the oils after each flight and it has lasted years. It is a Piper J-3 cub. Would love to have a 3D rc though. Just like that one. Maybe a biplane. Biplanes are pretty cool and can pull off amazing maneuvers.
Also add rubber bend off Exhaust too ,to divert direction away from fusalage
@@homienat3374 He had a deflector on there already.............??
@@Mgp-Rc what??????
Cant seem to find this airplane using the link provided... is it correct or was the plane removed?
Never mind, found it. For those looking, it can be built as a low or high wing. The website shows the low wing called ELVIRA Torfu Trainer... doesn't look to be free though
Please tell which camera and which editing software do you use?
Gopro, Canon SLR. Adobe Premier
Teşekkürler ✌️
Hello @KendinYap ! I have been watching your amazing work for the past couple of months, and I was wondering where you got all of your designs. Do you make them on your own? And if so do you use a particular software to design them.
Thanks in advance!
I use Onshape for 3D design. Some are mine, some are not. I already share the links of the designs that do not belong to me under the video. For example, the design of this model plane is not mine. But the parts needed for the fuel engine upgrade are all my own design.
How much CC does it have?
Motor 4cc (0.25cu.in) and Fuel Tank is 190cc
@@Kendin-Yap oh ok..uhm..i have an 7,5cc lying around..do you think its gotta pull it apart or is it gotta work?
Merhabalar orijinal STL dosyalarını bahsettiğiniz linkte bulamıyorum, buna benzer bir uçak yapmam lazım. Ölçüler hakkında bilgi almak için size nasıl ulaşabilirim?
For how long can it fly with a full tank?
It depends on the conditions, but it is possible to fly for about 15-20 minutes.
Whats 3d printer using?
Prusa Mk3S+
I want to communicate with you, my teacher, may God protect you
Please make an arduino drone with multiwii sofware please
bonjour comment je pourrai obtenir le fichier STL de l'avion en vous remercient d'avance
links are below the video.
Click "more" or "show more"
@@Kendin-Yap merci
Ellerine sağlık
kaç g thrust elde ediyorsunuz acaba ve ayrıca uçağın motorsuz ağırlı nedir. teşekkürler
Thrust değerini ölçmedim. Nitro motorlarda pek thrust değerine dikkat etmiyoruz. Motorun gücü üzerinden değerlendirmeyi yapıyoruz. Bu motor 0.85HP gücündedir. 1.2kg ile 2kg arası (Uçağın sınıfına ve yapısına göre değişir) modeller için uygun bir güçtür bu. Bu model 1750gr , motor ise 260 gr ağırlığında. Yani motorsuz 1490 gr dır.
buji ısıtıcısını uzun süre tuttunuzda bujinin ısınan teline zarar verebilir motor çalıştığında kısa sürede çekiniz kolay gelsin 👍 👍
mükemmel 👏👏👏
Aileron, elevator ve rudderların boyutunu nasıl hesaplıyorsunuz?
Bir formül kullanmıyorum. Yıllar içerisindeki tecrübelerim ile karar veriyorum.
elinize emeğinize sağlık sizden ricamız helikopter yapabilir misiniz çok istiyoruz
Helpppppppp😭😭😭😭😭😭😭😭😭 I followed your whole video about making the arduino transmitter and receiver that you posted in 2020 and did everything really nicely as you showed and now finally I finished this whole thing and now when I tested, the brushless motor is just keep on beeping and the servo motors are also not working anymore(they first worked when I plugged them first time). I did soooooooo much hardwork on this with everything I had please help me you are professional in this, I’m a noob and a beginner, what should I do and what can be my mistake in this?😢😢😢😢🥺🥺
Der Flieger gefällt mir, würde ich auch gern bauen. Würdest du mir die Druckdateien senden?
The link is below the video.
Güzel bir çalışma olmuş sizden ricam 3D yazıcıda parçaların birbirine geçme yani ölçü ayarı hakkında shorts çekebilir misiniz?
Flight time?
About 12-15 minutes
Allah sizden ve sizden olanlardan razi olsun. Cok teşekkür ederim iyi ki varsiniz. Bu ucagin ve diger projelerinizin solid cizimlerininin ham halini paylasma imkaniniz yok mu acaba ? Bu hususta yardımınıza ihtiyacim var. İstirham ediyorum.
Abi o motoru kaç teleye aldın
Çok eski bir motor bu. Ben eskiden sadece nitro motorlu modeller ile uğraşırdım. Bu yüzden eskiden kalma bir motor. Yeni fiyatlarını bilemiyorum.
ما هو إسم المحرك
what is the weight of your plane?
1750 gr