Toyota 4Runner 5th Gen ORP gets Eibach Pro Lift Kit (Stage 1) REMARK Exhaust and Spidertrax Upgrade!
Вставка
- Опубліковано 12 лип 2020
- Hey everyone, I created this video for anyone looking for some upgrades to their 4Runner and share those products, as well as challenge myself to pursue more film making. I also included a clip of the sound from the aftermarket exhaust at the 1:40 mark. I'll describe my thoughts and goals below as much as I can and provide links to everything as well. Hope you enjoy!
One of the first mods I wanted for my Nautical Blue 4Runner since purchase was a lift. My eventual goal is the King Off-Road suspension system but I wanted something budget friendly that's still quality to hold me over in the meantime and came across the Pro Truck Lift Kit system by Eibach. After reading one great review after another and countless more plus the pricing I knew that this was the upgrade I've been searching for. Huge thank you to my homie Danilo for helping me with the install.
Along the list of the first mods for my rig was the exhaust. Not necessarily to help with mpg's but for the sound alone. I'm a big old school muscle car fan and there's nothing like that throaty sound. I knew I wasn't going to get that out of the V6 in the 4Runner lol but I just wanted a better sound than stock. After weighing all the options when I was just about to make a decision I found REMARK. They have an exhaust specifically for the 4Runner and it's called Bold Performance. As soon as I heard the sound I immediately hit purchase. The build, welds, finish are high quality and for the price I couldn't be happier.
Just this past December I had 1" spacers in the front installed by the awesome crew, 88Rotors in Southern California. The 4Runner comes with a pretty big rake from factory so I installed these to minimize the rake and level it as much as possible. With the Eibach kit, they were no longer needed but I did install .5" cornfed spacers in the rear of the Eibach springs. Giving the total rear lift 1.5" as opposed to just 1" with the Eibach rear springs alone. It did result on getting the big looking rake from factory again but the awesome option of the Eibach front struts is they can be readjusted to a higher setting in case I do want the leveled look. However, I'm leaving this for the near future when I upgrade from 265 tires to 285's as well as aftermarket Upper Control Arms (UCA's.) An upside of having the rake is when I do occasionally load the rear with heavy weight I'll avoid the reverse rake. All in all, I'm satisfied with the stance I received from the Cornfed spacers and damn glad I didn't go with anything larger than the half inch.
Last but not least giving my 4Runner a wider stance with the Spidertrax 1.25" wheel spacers. I gave this mod a lot of thought cause I consider it sketchy. I've seen a few stories where some wheels flew off while on the road and definitely makes you think twice. But being confident that I install them properly there'll be a lesser chance something like that will happen. Plus their only temporary while I'm still running the stock TRD wheels, I'll eventually upgrade to wheels with a better offset and take the wheel spacers off. In the meantime, I love the wider stance look with the TRD wheels on the Spidertrax spacers.
If you're still reading this, thank you for your time and checking out my video. Shot and edited by me. I'll also drop the links below in case anyone is interested in checking these products out for their rig. Can't wait to hit some trails and test out the Eibach system.
Music:
/ teeza-berlin
Eibach Pro Truck Lift Kit:
eibach.com/us/2000/E80-82-071...
Bold Performance Exhaust by REMARK for Toyota 4Runner:
www.remark-usa.com/collection...
Spidertrax Wheel Spacers:
www.spidertrax.com/products/19...
Cornfed Spacers:
ozarkmountianlifts.com/4th-and...
Other Mods on my 4Runner:
generaltire.com/tires/light-t...
www.diodedynamics.com/ss3-led...
www.uniquestyleracings.com/st...
mesocustoms.com/collections/t...
www.yotaleds.com/product/ambe...
tacovinyl.com/products/standa...
www.lasfit.com/collections/ld...
www.lasfit.com/collections/le...
www.ajtdesign-llc.com/online-...
jordvnxsf - Авто та транспорт
Dope video, dope runner!
Thank you for your time!
Yup. I want that "Assholes live forever" hoodie. Beautiful 4Runner btw.
Haha thank you!
Rear suspension did you put a spacer in the back is that a 1 inch spacer or half because my kit didn’t come with that where did you get that from
Great vid man! I'm doing eibach with stock coils, can't wait.
Thanks! Nice, good luck with the install!
How is the drone in the cabin from the exhaust? Noticeable or too much? Sounds sweet.
Nice tio
The WRL tires make the T4R look sporty!
Nice stance on the runner. Was also refreshing to not constantly hear about liking and subscribing 50 times. Almost as bad as UA-cam’s ads.
Perfect look. Great choices. I’m going for the same look. Team Nautical Blue but with TRD bronze wheels. Great fitment thanks for sharing.
Thanks for your time!
My 4runner has the logo grille... how did or where did you get your grille with the lights
How is the ride with the Eibach suspension on road and offroad?
Yo I’m my alignment markers didn’t move should I still get an alignment?
Looks great!. Really looks MEAN.
Will be getting this kit and OME trim packer shims for front and rear to accommodate for the lean. Also go up 1 size for tyre (275). I have the 3rd row seating.
That exhaust sounds killer.
Thanks, sounds awesome man haven't regretted this kit so I'm sure you won't regret it either. Definitely recommend this exhaust as a cheaper option than the TRD exhaust and an improvement over the BRP and gibson exhaust.
Get real tires, at least 285
Yo, can I ask where you got this installed at? Just received my kit and I’m also located in SF
Got it installed by a friend, he's not taking on any work right now but there's stellar built in Sac, just got my dobinsons UCA's and perch adjusted from the first setting to the third by them. 88 Rotors in So Cal also got some work done in the past highly recommend them. But I realize those are far, heard of this new shop in Hayward, Beep's Off-Road, owner of Beep's burgers on Ocean Ave. I grab my philz across the street every morning, saw me in my 4Runner and approached me that they just recently opened up. He owns some pretty sick builds that I've seen parked on the Beep's burger lot. I might check them out in the future. Hope that helps good luck with the install!
Hey, so to clarify, you have the Eibach lift+ 265 tires right? Did you experience any rubbing with the Spidertrax spacers? Thanks!
Yessir, I'm rubbing at full lock on reverse. Took off the front mudguards hoping that would solve it but I will be needing a body mount chop soon. I'm switching to 285's so this was going to happen sooner or later.
@@griz7054 Thanks for the response! Could you elaborate more on the rub? Was it a bad rub or just minor rubbing during full lock reverse? Thanks again!
Minor on full lock
I have an eibach pro lift kit w/ rear springs in combination with spc upper control arms (275/70/17) no rubbing after alignment. Also to clarify I set the level at 1 and was able to get about an inch lift all 4 corners.
Nice Jeffy, one of my next moves if not the next move are upper control arms once I get 285's just not sure if I'll stick with 285/70 or go all out with 285/75
Nice set up, definitely interested in better ride, less body roll and nose dive hate it. If you haven’t already, can you provide the set up details and cost. Thanks
Wrote a pretty in-depth explanation of the set up in the description. As far as cost, around $1.5K for the suspension, exhaust, spidertrax and install.
Hey guys, i was just wondering why people use spacers? Wouldn’t getting rims with a higher negative offset be better then spacers?
Rims=$900 Spacers=$250. Not the best solution but …
Nice build! How do you like the ride on the Eibach’s? Subscribed!
Thank you I appreciate it, it's my first aftermarket suspension system so I haven't experienced other brands yet but man what an improvement from stock, smooth on the street/highway, less body roll, better cornering and nose dive significantly improved. Highly recommend it, especially since it's budget friendly.
@@griz7054 How much lift?
@@junnijune6597 originally in this video about 2" in the rear and 1.5" in the front but after moving it to the third perch recently it's near 3" in the front
Griz, maybe you addressed it post video, but I noticed it was a pinch out of alignment specs with this kit.
I’m considering this kit and replacing the upper control arms to align the vehicle after this lift kit install.
Q: Was your alignment in spec after the kit install, without new upper control arms?
@@elmaestropadilla1153 it was pretty much dialed when it was done, this kit is designed so you can run the factory UCA's but since running bigger tires I opted to switch the factory UCA's with aftermarket
IS your ORP with KDSS? If soo, I have the exactly same vehicle. What was the impact with KDSS? Did you have body lean after?
kdss equiped, no negative impact, no lean
Which setting did you use on the front shock? Ty.
started with the first clip w/ 265's but now i have it on the third clip along with Dobinsons UCA's and 33's (295's) Cooper XLT's
Is there a factory rake on the first clip? Debating on the first or second. I don’t mind a slight negative rake but want my Runner as level as possible. Hate the factory rake.
@@kurtrespicio3009 5th Gen 4Runner has about a 2.25" rack, The rear is ~2.25" higher than the front .
@@DJSlimzilla thank you
Any KDSS lean?
No lean thankfully!
I like it. but with a front and rear bumper delete with beefy protection would look much more aggro
Thanks! Metal bumper in the rear is def my long term plan but a full front metal bumper isn't. not a big fan of the current market and designs so I'll be cutting up the stock front bumper instead for now
Good video, but the music was completely unnecessary.