Also when bow is on draw board if you wanna know if you are dead center of the string measure the distance and angles top and bottom at the nock... when at full draw......
Also i reduced slap back from the blade by reducing the angle.25 / 26 deg. and with my .010, i added a .08 giving it a lil more stiffness and less slap when firing....
Going back to old school tuning. Go you Charl...
Also when bow is on draw board if you wanna know if you are dead center of the string measure the distance and angles top and bottom at the nock... when at full draw......
Also i reduced slap back from the blade by reducing the angle.25 / 26 deg. and with my .010, i added a .08 giving it a lil more stiffness and less slap when firing....
Another pretty good guide (from memory) to getting about a 33deg blade angle is to cut a business card from diagonal corners
Good video I've just got the spot Hogg
Those bows made from tubes are interesting don’t see them in the states🎉🎉🎉🎉🎉🎉
Nicely done
Also btw good video Charl ......
i have this rest but have gone from the metal blade to a polymer one from launchtech
If I was still shooting sighted compound I would seriously consider that as well.
Not necessarily. The higher you anchor the more downward pressure on that rest. Anchor point.
Sorry but as far as I know, 25.4mm = 1"