Vauxhall Corsa D Window Regulator Replacement, Opel Corsa

Поділитися
Вставка
  • Опубліковано 7 вер 2016
  • 2008 Vauxhall (Opel) Corsa 'D' model came in with the drivers window glass dropped inside the door after making some crunching sounds.
    Join Rob as he strips it down to investigate & repair.
    Music by Jeff Kaale
    / jeff-kaale
    Please watch the other videos on our channel. / oneauto
    and subscribe to keep up to date with the latest uploads.
    My Amazon shop is now open where I have shared the tools I use in my videos and other cool stuff I can recommend.
    amazon.co.uk/shop/oneauto
    (I make a very small commission from anything purchased)
    Thanks for your support!!
    Instagram: @oneauto.youtube
    / oneautogarage
    ko-fi.com/oneauto
  • Авто та транспорт

КОМЕНТАРІ • 66

  • @antsmooney869
    @antsmooney869 22 дні тому

    Just had a window regulator ( wire rope ) fail today on my sons 66 plt corsa Sri and came across this video 👌👍 great help I managed to get window out and wedged in for now and I’ll look at replacing regulator later now I’ve seen this video great stuff 💪

  • @misha478
    @misha478 5 років тому

    THANK YOU Rob for this video - extremely helpful. Due to your very easy to follow guide, I did it with my 10 year old son!
    Thanx again

  • @eliotcm
    @eliotcm 6 років тому +1

    Thank you from France !
    It goes with a Corsa D - 3 doors.
    The guide rail is in two parts but the operation is nearly the same.

  • @cockneyzombie
    @cockneyzombie 7 років тому

    Its so easy to brake clips and switches when you're not sure how to get them off this video was a big help thank you.

    • @OneAuto
      @OneAuto  7 років тому

      😎 glad it helped you out 👍

  • @Krillekris
    @Krillekris 8 років тому +2

    Great job, you are very good at explaining/showing things :-)

  • @craigtrigg4288
    @craigtrigg4288 2 роки тому +1

    mines gone the same as this one , now i can do my corsa d window thanks for your video

  • @Abid.Z77
    @Abid.Z77 6 років тому +1

    Awesome video now i know how to take the door panel off

  • @Zeisslermusic
    @Zeisslermusic 7 років тому

    Hello, it was a good video. Thanks for Shareing

  • @luckyeddie4454
    @luckyeddie4454 7 років тому

    Thanks for very informative vid. I need to access the door lock mechanism and was wondering how to remove the door card , you've shown me how it's done, cheers mate

    • @OneAuto
      @OneAuto  7 років тому

      luckyeddie Glad to be of assistance

  • @mariososzynski3488
    @mariososzynski3488 2 роки тому

    thank you very informative great video 👍

  • @buraktasyurdu9981
    @buraktasyurdu9981 7 років тому +1

    Hi I have a vauxhall corsa 2010 and my wing mirrors need to be tighten , could you show me how to do it

  • @drewsmith6066
    @drewsmith6066 5 років тому

    Cool fix nice one

  • @jamesinsch8774
    @jamesinsch8774 5 років тому

    thanks was a grate help

  • @tukokitkat
    @tukokitkat 5 років тому

    hi great video
    do have a video for the back side window?
    Thanks

  • @dedikyedik5897
    @dedikyedik5897 3 роки тому

    Thank you, great from Nederland

  • @ziggy-nx4yw
    @ziggy-nx4yw 8 років тому

    nice job keep them videos coming cheers

    • @OneAuto
      @OneAuto  8 років тому

      Thanks, will do!

  • @afzaalashraf3880
    @afzaalashraf3880 5 років тому

    Someone drilled 2 of the 3 rivets out and left the 3rd one when removing the motor. How do i re revit? If i drill 3rd one off do i have to drill the 3 holes in the motor to clear them for new rivits??

  • @afzaalashraf3880
    @afzaalashraf3880 5 років тому

    hi, i need that silver plate that fixes onto the motor so i can get bolts on rather than riveting. cant find one anywhere??

  • @TheLoneRanger1992
    @TheLoneRanger1992 4 роки тому

    hi mate iv had to have a new window as mine shattered and i’m trying to connect it up with a new regulator but my new window doesn’t have anything attached to the bottom of it to attach to the regulator

  • @ZuluMadMan
    @ZuluMadMan 4 роки тому

    Hey buddy I know this is an old video but do you still do these? Mine's the same cable just snapped

  • @CristiMihaiA
    @CristiMihaiA 7 років тому +1

    Thanks for the great video! I'm just wondering, did you remember to pick up all the bits and pieces that fell in the door from the old regulator?

    • @OneAuto
      @OneAuto  7 років тому +2

      Err yep 👍

  • @garethhughes6083
    @garethhughes6083 6 років тому

    Great Video but Vauxhall don't make thing easy. The latch cable hook end is straightforward enough but the end that fits the latch on the outside edge is a pig, How do you get it off so as to replace the cable with good ends?

  • @KyleRiffs
    @KyleRiffs 5 років тому

    Where did you get the AutoLift part from? I've found it on their website but there's no option to purchase and I can't find them anywhere on google

    • @OneAuto
      @OneAuto  5 років тому

      GSFcarparts.com

  • @pauldavies3929
    @pauldavies3929 4 роки тому

    Great video. If the window won’t come down, do you just drill out the rivets and lower it manually to access the torx screws to separate the glass from the channel?

    • @OneAuto
      @OneAuto  4 роки тому

      Never had to do it but that could work

  • @teenaviator4685
    @teenaviator4685 7 років тому

    Fantastic demonstration. I've been waiting for something like this for ages now!
    I have a 3-door Corsa d and every time I go over a hump, something in my doors rattles. Could this be the window regulator? I have a feeling a cable might just be hitting the inside of the door, because the windows work perfectly fine, but I can't find anyone else to give me an idea!

    • @OneAuto
      @OneAuto  7 років тому +1

      TeenAviator It could be the regulator loose. Now you can get that door card off and take a look inside. Thanks for watching.

  • @georgewilliam14
    @georgewilliam14 5 років тому

    Hello, dunno if you can help me but I have a Vauxhall Corsa 2012 and my window clucks when I open it but only once then when it starts from the bottom as well, I thought it might be off the runner because it was nothing like the sound to this video, any ideas?

    • @OneAuto
      @OneAuto  5 років тому

      George Hatswell Maybe one of the fixings is loose. You’ll have to remove the door card and try it when you can see things

  • @pauldavies3929
    @pauldavies3929 4 роки тому

    Are you able to tel me where you got the new part from please? I found a website with the part but there was no option to buy it🤔

    • @OneAuto
      @OneAuto  4 роки тому +1

      Think it was GSF car parts or Euro car parts

  • @TheTwistedStone
    @TheTwistedStone 7 років тому

    I only need to replace the interior door handle, do I still have to remove the door card ?
    Cheers for the video.

    • @OneAuto
      @OneAuto  7 років тому

      +Twisted Stone I think yes, so that you can unclip and disconnect the cable from the handle easier. Thanks for watching.

  • @WardyTranceMaster
    @WardyTranceMaster 6 років тому

    Alright mate I've gotta change a Corsa E one, will a Corsda D one be the same, seen a used 1 for 45quid

    • @OneAuto
      @OneAuto  6 років тому

      I don’t know but I doubt it

  • @cheekyscamp5
    @cheekyscamp5 6 років тому +1

    Great tutorial - I'm hoping that this saves me a few quid! One question though, the rivets that you had to drill out - what did you actually replace those with?

    • @OneAuto
      @OneAuto  6 років тому +1

      The new regulator comes with captive nuts (attached) and bolts. The bolts go through the holes where the rivets were.

    • @cheekyscamp5
      @cheekyscamp5 6 років тому +1

      Thanks, it makes sense now. Any ideas of approximate length and diameter of the bolts from memory? I'm sourcing a second hand unit off eBay that will likely not include any fixings.

    • @OneAuto
      @OneAuto  6 років тому

      They came with the kit so I can’t remember.

    • @cheekyscamp5
      @cheekyscamp5 6 років тому

      No probs, thanks for your help.

  • @MrSmurf1982
    @MrSmurf1982 6 років тому

    I have a issue where my window keeps wanting to travel upwards when its closed, only seems to do it when heater is over 2 on blower settings ? Any ideas? Great vids your doing.

    • @OneAuto
      @OneAuto  6 років тому +1

      Bobby-NoMates Wow that’s an interesting one. Never came across that one. Would need checking through with wiring diagrams etc.

    • @MrSmurf1982
      @MrSmurf1982 6 років тому

      One Auto, Thankyou for the reply, ill let you know what the fault is when i find it! I also have a problem where my fuel cap lock (central locking) stopped working, had to pull the cable from inside the boot, any idea if this is a easy fix?

    • @OneAuto
      @OneAuto  6 років тому

      Maybe.. Think you have to remove the inner wheel arch liner to get to the lock solenoid (or remove the solenoid so it doesn't lock)

  • @Krillekris
    @Krillekris 7 років тому

    I gonna do the same thing on my Peugeot 407. Only I bought a cable kit, so I gonna change the cable :-) Wish me luck.

    • @OneAuto
      @OneAuto  7 років тому +1

      Krillekris Yes the very best of luck with that sir. I hope you've got plenty of patience. I tried a cable kit on a Megane Cabrio rear glass once.. Never again it took about 2 hours to get the cable in.. never again :)

  • @SouthMainAuto
    @SouthMainAuto 7 років тому +2

    First I was wondering why u had 2 window switches on the passenger side of the car but then I see the steering wheel is on the wrong side!? Weird man. I just like seeing all these different types of cars. Kinda looks like the crap GM's I work on. Pretty similar. Did I hear you call it a door card?

    • @OneAuto
      @OneAuto  7 років тому +1

      South Main Auto Repair 😂 The steering is on the right cause it's the'Right' way to have it.. as you've taken it there, it's 'Petrol' not 'Gas' 😊
      You're right though, GM is the same over here wether it's Vauxhall or Opel. The only thing we don't have the pleasure of over here is Dorman! Yes I did say door card..

    • @cardude5323
      @cardude5323 7 років тому

      One Auto, no but we have many other craptastic components from Eurocarparts instead haha. most of it is cheese grade pure chinesium.

  • @rednroxy
    @rednroxy 3 роки тому

    The old unit was riveted in but I didn't see you rivet the new one back in, did I miss something ?

    • @OneAuto
      @OneAuto  3 роки тому

      The new one came with studs and nuts 20:07

  • @4damage
    @4damage 7 років тому

    My corsa has a broken inner door handle should i remove the door cover to replace it?

    • @OneAuto
      @OneAuto  7 років тому

      4damage Yes sir

    • @4damage
      @4damage 7 років тому +1

      Ive done it thanks for your help

    • @OneAuto
      @OneAuto  7 років тому

      You're welcome

  • @MohammedYousuf-nv6zp
    @MohammedYousuf-nv6zp 4 роки тому

    Window got smashed gonna replace window wondering do you have to take out regulator

  • @astanfartin1647
    @astanfartin1647 5 років тому

    looks like fun...also get to buy a rivet gun

  • @todayintheshopbanksy5904
    @todayintheshopbanksy5904 7 років тому

    7:20 There's your problem lady!!

  • @125sm3
    @125sm3 7 років тому

    looked like a pig of a job to get out.

    • @OneAuto
      @OneAuto  7 років тому

      They're not too bad to do really