Zimmermann FZ33 Portalfräsmaschine
Вставка
- Опубліковано 28 вер 2024
- Die FZ33 ist konzipiert zur schnellen, 5-seitigen Komplettbearbeitung von Aluminium und Verbundwerkstoffen, sowie dem Schlichten von Stahl und Guss mit hohen Beschleunigungswerten im Simultanbetrieb.
Not sure it'll fit in my garage
Whats with your ID image !
@@masaratech he is writing from hell
@@Silent-Killer11 didn't know they have internet service there.. cool 😂😂
@@masaratech me too 😂
With a machine as this one, I can create extraordinary things, without the slightest concerns !
Just got harder than CBN... i could sell my house for this and mill myself a bed for the night and life in it....
Made in Germany 💪😎
Didnt get a word but liked it
gibt es auch einen Späneförderer?
Bekommst bestimmt ne Schaufel dazu.
@@eikeheuer361 ist die dann auch im zimmermann-design?🤔
Einen Arbeiter gibt es bei dem Preis bestimmt für die nächsten Jahre kostenlos mit dazu^^
😂😂
PERFECT !
amazing
..машинная точность.. шо сказать))
Pela foto de introdução eu imaginei que fosse uma carro de chocolate 😂😂 hahaha
kosten? eine mit 3 auf 2 schätze ich auf 600000 euro ohne aufbau?
scheka666 ich würde schätzen unter ner Millionen wir das nix.
Würde sogar fast schon sagen mit 4 auf 6 bei 800000
@@andreass8759 eher so 6 auf 8 bei 980000
unter 2mio ist nix drin
нехилый вылет получается
fehlt nur noch das es nicht NUR Material abträgt, sondern die Zeit gekommen ist für Kombination aus ab- und auftragend Bearbeitung
Maker style. Alles klar
Low budget cnc rauter
Low budget?! Are you a billionare? Im pretty sure that thing is over 100k.
I would say over budget
That was sarcasm i dont know how to spell it but you know what i mean
Oh k my bad
Ok
Price
Загнивающий запад
Збс, а я в ручную работаю
Охуенно
Обычный 5 осевой станок.
Job eater
Geht Ratenzahlung? 25€ im Monat?
Wohl er 25k/Monat ...ich fange schonmal an zu sparen 💩
Safe
Kostet so um die 500k, bei 25€ im Monat wären es 1.666 Jahre. Wenn man davon ausgeht, dass jeder Nachfahre von 18-70 erwerbstüchtig ist wäre die Maschine nach gerade mal 32 Generationen abbezahlt. Ich würde folgendes in Betracht ziehen: für jede Generation in der es zwei Nachfolger gibt halbiert sich die Restlaufzeit.
@@MaxKoenig-Mk001 bei 25k in Monat ist das ding in 20 Monaten abgezahlt. bei 25€ in Monat stimmt deine Rechnung.
@@janbaum9705 Tippfehler, habs berichtigt 👍🏻
Exactly the right tool for making a keychain..
I'd love to get married in there
Vllt fräst der mir auch ein Auto aus einem Block :)
V4a
Ultra Geil ....... Leider passt diesere Maschine mit Weihnachten nicht unter der Baum als Geschenk.....der Baum passt im Geschenk.... hahahahaha
Impressive....not so cool for the poor young kid making minimum wage that has to clean that table.
Schokolade?
I have the same exact model in my basement! 😎🤘
Work on a fz 42 @ GKN bag of shit..... Bost is the way Fwd
Ich bin entzückt.
I've ran this same machine for couple of years!! hella good abilities, can't take the tork though!!
Good
Is this nice tool available in Minecraft?
its darude sandstorm
That surface finish made me fail no nut november
😂😂😂
lol
Нормально
tattoo machine for hulk
By hand more tasty
سبحانك يا الله ما ابدعك .
Aja imaginação para um máquina desta.
well, it is totally drei und dreissig then?
I like it..
Piro regane?
Oh, a great technology
Click bait
Awesome!!!
God👍💪👌
Я эякулировал.
kann man damit auch planfräsen haha
wo ist der witz
How many axis ?
... well do you even say „axis“ if this thing can reach any point within a 3 dimensional ROOM. But yeah lets count them:
1: hight 4/5: tilt (in a/b and c/d
2: width 6: Head 360 rotation
3:length 7: probably possible option to
mount a rotatable table (enough
room haha...)
So basically it’s nothing outta this world.
The big benefit of this machine is the big "workspace", more likely workroom in which the 6-axis head can freely move without restrictions in engine and movement mechanics inside a small cabinet.
Therefore it can reach every point from every angle, only general milling restrictions like cutting tool-geometrics.
Cheers ^^
Всё равно нужно потом доработать напильничком.
100%
und was kostet die so wie sie im Video da steht ohne werkzeuge ?
Boris Platzer Jedenfalls so viel dass die Werkzeuge nicht mehr ins Gewicht fallen werden^^
damit mal n crash fahren :D
Erst mit nem Crash ist die richtig eingefahren!!!
Ja dann setzt sich alles erst so richtig
Ok cooles gerät. Aber das bei 2:40 so zu fertigen wäre Unsinn. Haufen Materialverlust. Da werden anderer verfahren vorgezogen denke ich.
Habib Çankaya die späne kann man doch wieder einschmelzen :D
Ne sowas ist absolut gängig. Wie sollte man sowas sonst genau herstellen? Alu drucken? Oder schweißen?
Für nen Prototypen trotzdem interessant, da man kein Werkzeug herstellen muss
Oder es ist schon in dieser Form gegossen und die fräse bringt das ganze nur auf Maß
Aber was kostet
+Schwan Kurd
hohen 6 bis 7 stelligenbereich würd ich sagen
Im Internet hab ich so eine für 940 000 gefunden