What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq
boszwollocks I’m running the same on a Gen 1, just need 5mm spacers up front. Best looking ratio for these cars if you’re not doing a stance build IMO.
Thanks, I'm looking for a nice low maintenance 17inch set up. I'm running a bigger turbo and evo x wheels with 235/40r18. They rub and just aren't cutting it for traction
I have a 2004 Mazda 3. I just bought a wheel and tire package from you guys recently and am waiting for the final wheel to be delivered. Although on your website it says my new wheels should fit, I’m still skeptical if it will. Suspension is stock as well as everything else. New wheel specs - 18x7.5 38mm offset New tire specs - 225x40x18 I’m wondering if they will fit without having to roll my fenders.
Currently got my gen 2 Mazda 3 sedan on Vordoven Forme 10 19x9.5 +22 mm offset, Megan lowering springs, fenders barely rolled to prevent rubbing. Pokes a bit but looks really good. Made the jump up from 17 x 7.5s, very happy with the results.
thinking of running 235/245 tyres on 17x9+35. do i need to roll the rear or the front? and would i need any spacers? i know for +45 you need a 5mm to clear the struts( I'm on kw coilovers).
@tall divi that should fit. Because you’re +35 you will clear the strut. 235/45 might be a little taller than 255/40 (not sure) you may have to raise the car a bit to get the stance that you want.
I have been looking at a set of cosmis racing +33 18x9 and wanting to run 245 40 18s on it, its stock right now but going to lower it about 2 inches, will I have and run etc
I assume the fender well dimensions of a 2011 Speed 3 are the same as my 2011 s hatchback. No? I want to fill the fender wells without rubbing. Lo entiendes?
I just received my new wheels and currently looking for tires to mount on them. Wondering if I can mount 235/40/18. Wheel spec is 18x8.5 +35. I have a Gen2 (stock suspension, no fender rolling)
I have 234/40-18 Nitto NT05s on some 18x8.5 wheels. It's just about vertical to the wheel and I love it. You should be plenty fine on stock suspension. -Sean
fellow speed6 owner. Yes please do a video for the 6. And what camber arms did you go with? I’m thinking of going x9.5 or x9. Can’t decide. I sold my 8.75s and I’m now on BCS and my fenders are rolled
@@kadekast8814 I went with godspeed camber arms all through out and they work great except if you camber your fronts more than five degrees your knuckle will start to grind into your coilover collars, and I'd say that 9s are definitely the best fit for peace of mind, not having to worry about rubbing so much and whatnot, you can see my car on Instagram @novaspeed6
Here are specs on all cosmis wheels that fit! Every individual listing will have details on if you need modifications to fit the wheels or not🤘 www.fitmentindustries.com/wheel-offset-gallery?wheel_brand=Cosmis%20Racing&sort=date&page=3&year=2012&make=Mazda&model=MazdaSpeed3
I went thru the whole gallery you are missing a Mazdaspeed with the exact fitment I want. of course, lol was looking at a 255 40 18 on an 18 by 9.5 with 40mm offset. wonder if I'd have to roll fender or not.
2008 Mazda CX 9. Can't even find anything matching on your gallery. Are there no after market coilovers and wheels/tires for it? Want to drop it a little, but don't know what I can do.
I have a gen1 MS3 Hatchback.. I want to get a thicker tire to reduce road noise and feeling every pothole I hit. What rim/tire size can I do to achieve this with a 17” rim (I want it to look good too without fender rolling)?
@@fitmentindustriesgarage5583 Right now I’m using the stock 18” rims and tires 215/45 so I’m looking to do a completely new setup. I heard 17” with thicker tires was the way to go but I don’t know what size rim and tires I can do 😫
I just did a offset calculator and it said it will push out the wheel 1.7 inches from stock, that would look so bad I don’t get how people fit put them on their speeds and have them fit flush ?
I got a 1st gen sitting on coilovers with cut fenders big flares and 18x10.5 wheels. 😂 I'm here because yesterday a pothole ENDED my rear passenger 245/40/18 tire because they're stretched to fit. 😐 I got the car this way. Trying to decide what I can do to keep these wheels.
Just a head up. Don't run GEN 2 wheels on a gen 1 if you don't have spacers. They're et 52.5 at 7.5 inch. They hit the strut if you have a 235 tyre. You can only run 215's on the gen 1 with bc's (maybe 225) And trust me. 215's are not enough for the torque when you start modding it.
i have a 2008 gen 1 MS3 with KW coilovers set as high as possible (still about a half inch to 1 inch lower than stock ride height) and with the stock (gen 1) wheel i was able to run 225/40 18 with out any issues. they are also +52.5 offset but only 7" wide not 7.5" that does make a difference. im now running Rays International Mazdaspeed MS01S that are 18/8.5 +40 offset. they came with 225/45 on them so i kept the tire cause why not, they still had good tread. lol But they are tall and rub on the backs on big dips or if i pack my car with people in the back seat. my rear fenders are rolled and pulled but im gonna see to have them pulled a little more. im looking for new tires now but i havent desided on a width yet. it will be either a 235 or a 245. the wheel can support up to a 265.
I have a Mazdaspeed 3 obviously lol, and I’m riding with stock suspension and the stock 2010 wheels that come with them. The current tires it has are 225/40R18 but I want to try a 225/45 or 225/50. Does anyone know if both of these will work fine without any rubbing? Please and thank you for all who help!
Don’t listen to Don, people run 17s all the time. My Gen 1 has 17x9 +45 RPF1s and 255/40 tires, this setup is all over the internet not sure how/why they missed it. Fits perfect though just need 5mm spacers up front to clear suspension.
@@CeltixFan20 oh yes. It is more of a general thing with the channel. 18s are quite common on all their videos but most of the vehicles that are shown have more variety of sizes to them. I feel if you are selling wheels you need to showcase all things and as many setups as you can to gain more customers and more viewers. Like I told @don e. I have seen them locally with 17s and 19s. For track setups 17s are best hands down. For show setups the 19s on air is perfect.
Hi guys, as always great content. I have a Mazda speed 6 and was wondering with an XXR 530 wheel 18 with a 9.5j. What offset would I need without spacers and what's the biggest tire size I can fit. I usually like a flush fit style. My fenders are rolled. I'm on stock suspension for now, I'm looking at lowering springs or coil overs. I would appreciate your advise. Thanks in advance.
if you go to their website (Fitment industries) they have a section with literally thousands of cars. i was on there just a couple days ago and found like 10 pages worth of info for my Mazdaspeed 3. Abd now this video. im sure you will have no problem finding Mazdaspeed 6 cars and setups on the site. good luck. www.fitmentindustries.com/wheel-offset-gallery?make=Mazda&model=MazdaSpeed6&sort=date
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a
comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq
What about 20's??
how can i contact you through phone or email, i need your help in clarifying some doubts
@fitment Industries Garage does video also work for non-Mazda Mazdaspeed 3 cars either 1st or 2nd gens?
Gen1 owner from the clip on 0:50. Was running 17x9 +45 on 255/40/17 Firestone Indy500 tires with no rubbing or rolling.
Yeah how tf. Surely that is not possible on the front. I can't fit the stock gen 2's on a gen 1 with BC's. and they're et52.5 at 7.5.
boszwollocks I’m running the same on a Gen 1, just need 5mm spacers up front. Best looking ratio for these cars if you’re not doing a stance build IMO.
Thanks, I'm looking for a nice low maintenance 17inch set up. I'm running a bigger turbo and evo x wheels with 235/40r18. They rub and just aren't cutting it for traction
You're one that has the kickass tons of miles gen1? Damn man how many miles now?
Just something about evo x wheels on a gen juan rubs me the right way
Have em on my gen2, great look on the speeds
@@V4LLLE What are the wheel and tire specs on the evo x setup? thanks
I’ve got Evo 8 wheels on my Gen2 and they look so good🤤
@@Sarm-mx6qy 18x8.5 +38
Fiiiiiinally! Been waiting forever for this
Same same
I have a 2004 Mazda 3. I just bought a wheel and tire package from you guys recently and am waiting for the final wheel to be delivered. Although on your website it says my new wheels should fit, I’m still skeptical if it will. Suspension is stock as well as everything else.
New wheel specs
- 18x7.5 38mm offset
New tire specs
- 225x40x18
I’m wondering if they will fit without having to roll my fenders.
Did they fit?
Currently got my gen 2 Mazda 3 sedan on Vordoven Forme 10 19x9.5 +22 mm offset, Megan lowering springs, fenders barely rolled to prevent rubbing. Pokes a bit but looks really good. Made the jump up from 17 x 7.5s, very happy with the results.
Do you think 19x10.5 +22 would fit on my 2010 speed 3?
@@Build_The_World imo probably not without fender modifications
What about 20inc on 2017 Mazda3 sedan? Will fit?
Gen2 in Australia running 18x8.5-10 front runners 225s 18x9.5-25 rears 225s
All stretched bridgestone RE003 road legal semi slicks
They listened!!!! You guys rock 👍🏼👍🏼👍🏼
I like this guy way better than the dude who hosts so you want on the other channel
The last car 0.0 . . . What headlights are those?
what rims are those on gen 1 @5:30
Can you tell me if wheels from a Chevy spark are compatible with my Mazda 2
I’m on 17x9+35 no rub no scrub on Bilstein b16 coilovers. 255/40/17. All I did was fold the lip of the fender.
thinking of running 235/245 tyres on 17x9+35. do i need to roll the rear or the front? and would i need any spacers? i know for +45 you need a 5mm to clear the struts( I'm on kw coilovers).
@tall divi 245 with what sidewall profile? I don’t run spacers. They clear the brake calipers and the strut.
@@travwilliams97 the seller currently has 235/45/17 on the wheels. not too sure what profile to go for if i change the tyres to 245.
@tall divi that should fit. Because you’re +35 you will clear the strut. 235/45 might be a little taller than 255/40 (not sure) you may have to raise the car a bit to get the stance that you want.
Jealous of the Gen 2 wheel wells. My 17x9 +45s on 255/40 are pushing it on the Gen 1 haha.
Wish my mazda mazdaspeed 3 was cool enough to be on this video ;)
I'm looking for wheels that will have a flush fitment that won't rub on lowering spring? You guys know what?
Why are they putting wider wheels on with stock size tires or smaller than stock size tires ?
When you said widest wheels on stock body, I was heart broken. Lol. Im running 18x11 +8, but im flared. Sadboi. I didnt make it ):
I have been looking at a set of cosmis racing +33 18x9 and wanting to run 245 40 18s on it, its stock right now but going to lower it about 2 inches, will I have and run etc
Would a set of enkei rs05rr 18×9.5 +35 fit without Rolling fenders?
If you ever go with the rs05rr please let me know how it fits im currently looking at the same specs!
U d need to fender roll! I have the exact size on a avid rims and also need a 12mm spacers bc of the 35 offset and havin 245/35 tires
Would this apply to 2010 Mazda 3s that arnt speeds as well ?
Yes
I assume the fender well dimensions of a 2011 Speed 3 are the same as my 2011 s hatchback. No? I want to fill the fender wells without rubbing. Lo entiendes?
I got a question what rims n tires are good for a 2010 mazda 3 sport hatchback
I have a 2016 mazda 3 on 20s is there a website I can show you my car
17in light rim with lots of rubber around it!
Finally! Now all I need is money 😅
I just received my new wheels and currently looking for tires to mount on them. Wondering if I can mount 235/40/18. Wheel spec is 18x8.5 +35. I have a Gen2 (stock suspension, no fender rolling)
I have 234/40-18 Nitto NT05s on some 18x8.5 wheels. It's just about vertical to the wheel and I love it. You should be plenty fine on stock suspension.
-Sean
I have the exact same wheel and tyre specs but lowered and it rubbed at times on bumpy roads at speed however a roll fixed that
So I could do a 18x8+35 with no fender rolling🤔
I got 18x9 with a 32offset and with 215/45 and rolled the rear and it’s perfect lowered
So you kept oem tire size and increased rim width? did you have to roll front at all?
@@Mrbabybluejay no just rear
Just after I start looking at wheels for my MS3
im looking for some nice red wheels for my 2011 ms3
hey you guys used my car I'm so happy now lol
17x9 +34 konig ultraform 245 40 Rear fender roll for me needs to be pulled on bc coils
If y'all do a Mazdaspeed 6 video I'd love to show off my car a bit, I've got 18x9 Cosmis MR7s on racelands and camber arms
fellow speed6 owner. Yes please do a video for the 6. And what camber arms did you go with? I’m thinking of going x9.5 or x9. Can’t decide. I sold my 8.75s and I’m now on BCS and my fenders are rolled
@@kadekast8814 I went with godspeed camber arms all through out and they work great except if you camber your fronts more than five degrees your knuckle will start to grind into your coilover collars, and I'd say that 9s are definitely the best fit for peace of mind, not having to worry about rubbing so much and whatnot, you can see my car on Instagram @novaspeed6
Hey I was wondering if the cosmis racing mr2 with 18x8.5 + 22 would fit and if so what would I have to do to get them to fit?
Here are specs on all cosmis wheels that fit! Every individual listing will have details on if you need modifications to fit the wheels or not🤘 www.fitmentindustries.com/wheel-offset-gallery?wheel_brand=Cosmis%20Racing&sort=date&page=3&year=2012&make=Mazda&model=MazdaSpeed3
@@fitmentindustriesgarage5583 🙏
Looking all over for this answer. Did you ever get these and did they fit? Looking at the white or Bronze.
@@MichaelWilliams-vg1ou not exactly he just sent me a link to see what fits
Have to do what fits on e46. Need inspiration for future
Do one about a 2 gen r56 Mini Cooper
I went thru the whole gallery you are missing a Mazdaspeed with the exact fitment I want. of course, lol was looking at a 255 40 18 on an 18 by 9.5 with 40mm offset. wonder if I'd have to roll fender or not.
Did you want some NT03’s?😭😂 bc same brother
Can I installed 19x8.5 +45 wheels on my 2012 Mazda2 with no mods?
2008 Mazda CX 9. Can't even find anything matching on your gallery. Are there no after market coilovers and wheels/tires for it? Want to drop it a little, but don't know what I can do.
Just came home from work and scraped the OE rims on my passenger side real bad and now I’m in the market. 😂
We got you! 🤘
Would a 19×8.5 +40 fit with stock suspension and no rolling not to mention would it also fit if I add coilovers in the future
You might be fine on stock suspension but if you add coilovers you’ll have to roll your fenders for sure!
@@fitmentindustriesgarage5583 thank youuuuu
@@randyfernandez11 Hey did you finally had to roll your fenders with the coilovers?
do 15 inch wheels clear the brakes? I have a regular 3 sport and would like to maximise the squish
I'm running 15s for my winter set. No issues here
Planning to get 18x8.5 +35 or +40 with 225 or 235 tires on my Axela 20S with stock suspensions. Any other recommendations without fender rolling?
Anyone know the front and rear bumper on the white gen 2
Knightsport front and rear bumpers
@@SeupakiD Do these fit on US models? I heard that they have slightly different attachment points
Hey guys non Mazda speed 3 but a regular Mazda3
18x8.5 offset 45.
Tire 225 40 18??
What you think? 🤔
I think that would look pretty good 🤘
I ordered my wheels on the last week of last month and then you come out with this vid after? XP
just got myself some F1r F29s 18x8.5 with 42 offset. was thinking about going 38 with the offset but im glad I didnt. Cant wait!
I have a gen1 MS3 Hatchback.. I want to get a thicker tire to reduce road noise and feeling every pothole I hit. What rim/tire size can I do to achieve this with a 17” rim (I want it to look good too without fender rolling)?
What width is your wheel?
@@fitmentindustriesgarage5583 Right now I’m using the stock 18” rims and tires 215/45 so I’m looking to do a completely new setup. I heard 17” with thicker tires was the way to go but I don’t know what size rim and tires I can do 😫
Mazda 3 MPS is a lot easier to pronounce haha
Can I run avant garde 18x8 with +20 offset, I have lowering springs. Also will this effect handling at all
I just did a offset calculator and it said it will push out the wheel 1.7 inches from stock, that would look so bad I don’t get how people fit put them on their speeds and have them fit flush ?
I got a 1st gen sitting on coilovers with cut fenders big flares and 18x10.5 wheels. 😂 I'm here because yesterday a pothole ENDED my rear passenger 245/40/18 tire because they're stretched to fit. 😐 I got the car this way. Trying to decide what I can do to keep these wheels.
Hey there! So are you looking for new tires?
@@fitmentindustriesgarage5583 yeah pretty much. I think I'm going to end up going with 275/35/18 when I can afford it.
What is the best set up for mazdaspeed 3 2013 ??
18×9 with a 35 offset
Just a head up. Don't run GEN 2 wheels on a gen 1 if you don't have spacers. They're et 52.5 at 7.5 inch. They hit the strut if you have a 235 tyre. You can only run 215's on the gen 1 with bc's (maybe 225) And trust me. 215's are not enough for the torque when you start modding it.
i have a 2008 gen 1 MS3 with KW coilovers set as high as possible (still about a half inch to 1 inch lower than stock ride height) and with the stock (gen 1) wheel i was able to run 225/40 18 with out any issues. they are also +52.5 offset but only 7" wide not 7.5" that does make a difference.
im now running Rays International Mazdaspeed MS01S that are 18/8.5 +40 offset. they came with 225/45 on them so i kept the tire cause why not, they still had good tread. lol
But they are tall and rub on the backs on big dips or if i pack my car with people in the back seat. my rear fenders are rolled and pulled but im gonna see to have them pulled a little more. im looking for new tires now but i havent desided on a width yet. it will be either a 235 or a 245. the wheel can support up to a 265.
I’ve ran 225/40s on 2013 wheels on my 2007 speed w/stock suspension since 2016. No rubbing, no problems.
I have a Mazdaspeed 3 obviously lol, and I’m riding with stock suspension and the stock 2010 wheels that come with them. The current tires it has are 225/40R18 but I want to try a 225/45 or 225/50. Does anyone know if both of these will work fine without any rubbing? Please and thank you for all who help!
Nothing about wheel weight? I'm looking for 15 lb or less wheels.
17x9 +45 RPF1s are 15lbs. Need 5mm spacers up front to clear suspension though.
Wish more diameters were shown. 18s 18s 18s and did they say 18s. What about 17s and 19s or even 20s if they fit?
Don’t listen to Don, people run 17s all the time. My Gen 1 has 17x9 +45 RPF1s and 255/40 tires, this setup is all over the internet not sure how/why they missed it. Fits perfect though just need 5mm spacers up front to clear suspension.
@Don E. on most of their videos it is always 18 inch wheels. They are other diameters and styles. I have seen these on 19s and on 17s.
@@CeltixFan20 oh yes. It is more of a general thing with the channel. 18s are quite common on all their videos but most of the vehicles that are shown have more variety of sizes to them. I feel if you are selling wheels you need to showcase all things and as many setups as you can to gain more customers and more viewers. Like I told @don e. I have seen them locally with 17s and 19s. For track setups 17s are best hands down. For show setups the 19s on air is perfect.
Hi guys, as always great content.
I have a Mazda speed 6 and was wondering with an XXR 530 wheel 18 with a 9.5j. What offset would I need without spacers and what's the biggest tire size I can fit. I usually like a flush fit style. My fenders are rolled. I'm on stock suspension for now, I'm looking at lowering springs or coil overs. I would appreciate your advise.
Thanks in advance.
if you go to their website (Fitment industries) they have a section with literally thousands of cars. i was on there just a couple days ago and found like 10 pages worth of info for my Mazdaspeed 3. Abd now this video. im sure you will have no problem finding Mazdaspeed 6 cars and setups on the site. good luck.
www.fitmentindustries.com/wheel-offset-gallery?make=Mazda&model=MazdaSpeed6&sort=date
@@Sarm-mx6qy thanks, this link helps a lot.
Do Mazda 3 sedan please
its the same car
How bout a 18×9 with a 25 offset 🙃
You will definitely have to roll your fenders. And there still might be some rubbing.
@@fitmentindustriesgarage5583 Thank you 😇
you should do what wheels fit Mercedes 190E and E-class ( W211)
What Fits: Honda Prelude 5th gen 1997-2001
No one on UA-cam when the world opened back up...🖖🏾😃
#Mazdaspeedarmy
my mazda 3 2010 is sitting on mustang cobras 2004 wheels 17x9 +26mm offset @mk2evil3 on ig
you can just say Mazdaspeed3 gels i know its weird
Speed6
Am I the only one that thinks his eyes are bloodshot af?
Mazdaspeed 6?????????