Hello, please tell me, How do I configure the "Delimiter" function for an MFP on the Elatec MultiTech Nano USB reader in DEC format? That is, I have Field 1 and Field 2, and in the Delimiter section, I specify different options like \ or \ or _ - as a result, on my Print Server software (for example, SafeQ), only Field 1 is outputted, and the second part and the delimiter symbol do not come out. What am I doing wrong? Thank you.
Thanks for sharing. I would like to ask, Is it possible configure this reader, that i could get somehow card reader serial number also together with card hex number. My idea would be get not only card number in hex but also the reader serial number too. So i could know in which physical location employee used the card.
Hi jasiukevicius! Please contact our technical support team. They can surely help in answer your questions. Visit www.elatec-rfid.com, open the contact box on the right side and select technical support. Best regards, the ELATEC team.
This is just the request from this specific configuration. In other cases it can be different. For more information, please contact our Support Team at: @support-rfid@elatec.com.
Such a helpful video for Toshiba MFP - Elatec card readers. Thank you so much
THANKS A LOT. You really helps me to configure!
THANKS!!!!! for sharing this content.
jose xavier your welcome. Sounds it was helpful
When I have saved the project source code, how can I reopen it in AppBlaster to make new modifications? Can you provide guidance?
Should be noted that this does not work for NTAGs. For those you should use the MIFARE Ultralight transponder type and scan for Data.
Hello,
please tell me,
How do I configure the "Delimiter" function for an MFP on the Elatec MultiTech Nano USB reader in DEC format?
That is,
I have Field 1 and Field 2, and in the Delimiter section, I specify different options like \ or \ or _ - as a result, on my Print Server software (for example, SafeQ), only Field 1 is outputted, and the second part and the delimiter symbol do not come out.
What am I doing wrong?
Thank you.
That was helpful. How it goes with 64 bits? Current readout: HID iCLASS 64 Bits ID - 35B17314FEFF12E0, required 32 bits.
Thanks for sharing. I would like to ask, Is it possible configure this reader, that i could get somehow card reader serial number also together with card hex number. My idea would be get not only card number in hex but also the reader serial number too. So i could know in which physical location employee used the card.
Hi jasiukevicius!
Please contact our technical support team. They can surely help in answer your questions.
Visit www.elatec-rfid.com, open the contact box on the right side and select technical support.
Best regards,
the ELATEC team.
why number of bits is 16 ?
This is just the request from this specific configuration. In other cases it can be different. For more information, please contact our Support Team at: @support-rfid@elatec.com.
good