very clever , thats brilliant . ive been trying to work out how to turn the energy from my solar panels into heat for my storage heater and this is perfect, if its reasonable weather i get between 10 and 30 amp 12v i'll just put the 2 coils in to the middle of the heater it will produce a background heat . how long does it take to boil a cup of water? how long do the elements last before they burn out? totally brilliant
Thank you.To boil a cup of water,It takes almost 20mins,if source is 12v 20A average.Coil last for long period if we avoid water drop on it and at connection terminal,coil's ends must be in vertical .
Very nice! I am thinking about how to do a smoke generator, and this is a good start. Basically I need the coil to heat up wood chips, to produce smoke and redirect it through a pipe.
Looks like you miscalculated, the 2 windings are connected parallel to the power source so: S (Apparent Power) = V x I = 13V x (3.5Ohm/2) = 13V x 1.75 Ohm = 22.75 VA While for P (Real Power) there must be a power factor that has been measured because the formula is P = V x I x Cos Phi. So it can be concluded that the tool is only 22.75 watts (Cos Phi is considered 1). Hope this helps and please discuss about this
Hi, this is amazing. I myself don't have much knowledge in this type of things but I was wondering if this is okay to be left on the table for example, will it make the whole can hot/burn the table? And as well as could it be used as a heater for a small room. Amazing vid!!
Thanks.You can use little big Goldtin or Mud base and all plastic insulator should be replaced with cemented insulator.To leave on the table,there must be iron base with three legs,minimum 4 inch height.It can be used as heater.
I reckon the clay is used as a refractory element to hold the wire and distribute the heat more evenly. Since only the top of the element needs to heat up the bottom half or three quarters of the tin can could be filled with perlite or vermiculite as insulation to prevent the heat from transfering downwards. Nice tutorial, thank you!
May I ask, will a nichrome wire heating element work on a 12V dc battery. If yes, will it generate enough heat to cook food? Your answer will be very much appreciated.
very happy to see this video, very helpful. I'm working on my thesis project it'd be great if you could answer me few questions. I wanted this wire to give away constant heat about 70 degrees to heat up air for a constant rate of about 2-3 hours would that work out? would make my thesis project work!!
Thank you so much.This will work as you mention,but we need to replace plastic materials by cemented type materials,which is used as insulator.Video of a bit modification of this heater has been uploaded,that is suitable for your thesis work. Link:- ua-cam.com/video/EHmCIRefkMw/v-deo.html
Bhai isme ra lagy mene stove me 2000 wett ka bohat bill leta he taar ko kya bolty h coper?? 700 wett ka kese banao me or 220 volt me chlega na 1000 500 wett waly chl to rahe he
2000 watts ka heater per hour 2 units electricity leta he.Ye copper nahi Nichrome Wire hei,1000w ka heating coil market me milega,aur 400 watts ka heting coil Rod heater ka andar hota hei o bhi market me milega,700W ka banaanaa thoda calculation karna padega.
I am trying to make a simple Incense burner as the ones available in market stop working in few days. Can you please help me make a durable and heavy duty Incense burner? If you can reply to this comment I would be really thankful. Amazing video BTW.
Battery 12v and AH depends upon how long we use heater.It will run on 12v AC/DC adapter with current 10A minimum, And solar panel must be 100w minimum. (rated 12v)
Thank you for the question.Not recommended for long time. To use for long time, it is better to take big size goldtin box with greater diameter and height.Height must be at least 2 inches.
That depends upon the power source. Power source must be 12v- 15v AC or DC, 10A minimum. If we have 12v- 15v, 20A power supply, then we can connect two heaters, 3 heaters need 30A, 4 heaters need 40 A and so on. ......but voltage remains same 12v- 15v. ......And do not connect it directly to 220v AC supply socket.
I have an idea for this,find quartz heater element,it is rated 400W each.open both cemented cap and inside tube there is filament.take out it,cut in the middle of coil.Now each becomes suitable to run with 110v,200W.But we need such coil that runs with 220v,so either you must have step down voltage regulator or connect two 400W coil in series than it can be run with 220v,but won't glow like single coil.Actually I did not find matching coil in the market.if you find any idea,please share with me thank you.
White cement is not good enough, will be dry soon.White cement need water to become stronger, but we can mix little bit of it with any type of fine clay.
very clever , thats brilliant . ive been trying to work out how to turn the energy from my solar panels into heat for my storage heater and this is perfect, if its reasonable weather i get between 10 and 30 amp 12v i'll just put the 2 coils in to the middle of the heater it will produce a background heat . how long does it take to boil a cup of water? how long do the elements last before they burn out? totally brilliant
Thank you.To boil a cup of water,It takes almost 20mins,if source is 12v 20A average.Coil last for long period if we avoid water drop on it and at connection terminal,coil's ends must be in vertical .
@@TMCreations
How many coils can I use if I want to cook or fry and how many ampre does it require for it to cook
Very nice! I am thinking about how to do a smoke generator, and this is a good start. Basically I need the coil to heat up wood chips, to produce smoke and redirect it through a pipe.
Thank You and best of luck.
Nice Work brother.
I appreciate your good effort in making this DC Heater project.
Thank you very much.
You have a very practical brilliant mind!!!
Thank you......
Looks like you miscalculated, the 2 windings are connected parallel to the power source so:
S (Apparent Power) = V x I = 13V x (3.5Ohm/2) = 13V x 1.75 Ohm = 22.75 VA
While for P (Real Power) there must be a power factor that has been measured because the formula is P = V x I x Cos Phi.
So it can be concluded that the tool is only 22.75 watts (Cos Phi is considered 1). Hope this helps and please discuss about this
yeah, why power is equal to "voltage * resistance" in your formulas? Why not voltage * current?
Bếp điện 12v 100W mini bạn chế rất hay
Cảm ơn bạn rất nhiều. Đây là một lò sưởi 200W khác. ua-cam.com/video/EHmCIRefkMw/v-deo.html
Very Good
Ek no
Sale me
Hi
Very nice
also you can use small terracotta flower pot, ceramic bowl or ceramic rod, using clay is complicated.
Subscribed
Hi, please what temperature was the hot red coil? (Estimate) 900°C?
The only thing I would have a problem with is that there is no cover or protector so is can catch anything on fire fast
Your comment sounds like a recipe that final destination direction team could use..
If he cover it how can you know it's original
@@parshuram3207 what?
@@camstrams2343 cover kare tho heat kaise dikega public kaise real heat samjega
What is the piwer source wall plug or battery or converter plugged into wall or battery?
What did you use in the video
Good job👍
Thanks alot.
Hi, this is amazing. I myself don't have much knowledge in this type of things but I was wondering if this is okay to be left on the table for example, will it make the whole can hot/burn the table? And as well as could it be used as a heater for a small room. Amazing vid!!
Thanks.You can use little big Goldtin or Mud base and all plastic insulator should be replaced with cemented insulator.To leave on the table,there must be iron base with three legs,minimum 4 inch height.It can be used as heater.
I reckon the clay is used as a refractory element to hold the wire and distribute the heat more evenly. Since only the top of the element needs to heat up the bottom half or three quarters of the tin can could be filled with perlite or vermiculite as insulation to prevent the heat from transfering downwards.
Nice tutorial, thank you!
Input kitna voltage de rhe ho
12v to 15v, both AC or DC, with 10A.
May I ask, will a nichrome wire heating element work on a 12V dc battery. If yes, will it generate enough heat to cook food? Your answer will be very much appreciated.
very happy to see this video, very helpful. I'm working on my thesis project it'd be great if you could answer me few questions.
I wanted this wire to give away constant heat about 70 degrees to heat up air for a constant rate of about 2-3 hours would that work out?
would make my thesis project work!!
Thank you so much.This will work as you mention,but we need to replace plastic materials by cemented type materials,which is used as insulator.Video of a bit modification of this heater has been uploaded,that is suitable for your thesis work.
Link:- ua-cam.com/video/EHmCIRefkMw/v-deo.html
Please let me ask you a question, does a 1 meter long resistor wire produce high °c(temprature) than 0.5 meter resistor?
Bhai isme ra lagy mene stove me 2000 wett ka bohat bill leta he taar ko kya bolty h coper?? 700 wett ka kese banao me or 220 volt me chlega na 1000 500 wett waly chl to rahe he
2000 watts ka heater per hour 2 units electricity leta he.Ye copper nahi Nichrome Wire hei,1000w ka heating coil market me milega,aur 400 watts ka heting coil Rod heater ka andar hota hei o bhi market me milega,700W ka banaanaa thoda calculation karna padega.
Super
How did the egg go?
Bro how many watts are needed to heat a 20 inch 20 gauge nichrome wire to 300 degrees (the wire itself)
Hello sir this Nickel Chrome or Tungsten
Nickel-chromium
I am trying to make a simple Incense burner as the ones available in market stop working in few days. Can you please help me make a durable and heavy duty Incense burner? If you can reply to this comment I would be really thankful.
Amazing video BTW.
Please explain the size, ampere and volts of the battery and will it run on a 12 Volt Ac Dc adapter or direct solar panel?
Battery 12v and AH depends upon how long we use heater.It will run on 12v AC/DC adapter with current 10A minimum, And solar panel must be 100w minimum. (rated 12v)
Can this device be used for more than one hour please
Thank you for the question.Not recommended for long time. To use for long time, it is better to take big size goldtin box with greater diameter and height.Height must be at least 2 inches.
if source is solar panel than yes
can i ask what type of insulator did you use
전선은 왜 가열되지 않나요?
전선은 따뜻하지만 너무 뜨겁지는 않습니다.
How many this kind of Heaters i can plug to a single power supply socket ? Answer Please.
That depends upon the power source. Power source must be 12v- 15v AC or DC, 10A minimum. If we have 12v- 15v, 20A power supply, then we can connect two heaters, 3 heaters need 30A, 4 heaters need 40 A and so on. ......but voltage remains same 12v- 15v. ......And do not connect it directly to 220v AC supply socket.
If my don't amaron battery use this type sir?
Yes you can.
Thank you very much Sir
What will happen if i connect it to Direct home electricity supply of 220V?
Not for 220v, only for 12-15v.If you connect than it will be burnt like high amp fuse.
@@TMCreations
How many rechargeable lithium batteries can go?
Mntap
nice video >> i wish u help me i want to know How to Calculate Heater Wattage for wire tungsten i hope u help me
the wire 3.5 mm
Multimeter ki setting AC par he 13.3v aor ap ne Dc 12v likha he
Yes we can use both AC or DC....Setting is adjusted to AC while using AC current.
Does it heat up glass I’m tying to make a enail it’s made of quartz I’m make a smaller one ☝️
Of course. ...but make sure follow the safety and precautions.
كام فولت وكام امبير
12-15 فولت تيار متردد أو تيار مستمر وقوة 10 أمبير.
@@TMCreations أحسنت بارك الله فيك
How to make 200 watts 220v kanthal coil heater. Pls advice
I have an idea for this,find quartz heater element,it is rated 400W each.open both cemented cap and inside tube there is filament.take out it,cut in the middle of coil.Now each becomes suitable to run with 110v,200W.But we need such coil that runs with 220v,so either you must have step down voltage regulator or connect two 400W coil in series than it can be run with 220v,but won't glow like single coil.Actually I did not find matching coil in the market.if you find any idea,please share with me thank you.
@@TMCreations what battery did u use to power the heater pls
I need to consult something with you..how can we get in touch!
Ac me ho sakta keya ? Hume bana dijiyega please ?
AC 12v se 15v tak aaram se chal jaayegaa. Mei to abhi nepal me se hai.
nice
Thank you. ..
Why is it coming from smoke
At starting,because of wet wires.
How many pieces of wire can I use?
Do I have to adjust my resistance when using multiple wires?
That depends on power source, if the power source is more than 100 w, I.e. 12v, 10 A to 15A, then we can add another coil in parallel.
@@TMCreations Thank you! That makes a lot of sense
In which country do you use 100 Volt?
Not 100 Volt,it is 100W.And we use 220V AC in Nepal.
@@TMCreations o.m.g.g.
what is the recommended volts for 1000watt coil heater
For 1000W coil heater, Rated voltage is 220v-240v AC.
Not showing battery
can we use white cement instead of Black Clay ?
White cement is not good enough, will be dry soon.White cement need water to become stronger, but we can mix little bit of it with any type of fine clay.
@@TMCreations THANKS SIR, THANKS, and also pls. tell Will POP plaster of paris good for such prj ?
Quiere una parrillita para que sostenga el sartén 🍳 y así le pueda entrar aire y así no se baje la temperatura 🌡️
Gracias por la buena sugerencia.🙏
220 volts b yan.
only problem with that was the egg shell
Make cloth iron
👌👌👍
Из под чёрной икры банка не нашлась, было бы очень миниатюрно и гламурно!
Большое спасибо за приятные слова....
By where we can get the coil heater??? Means that coil
Old hair dryer, heat gun, or clothes dryer.
120 to 150W
What else can i use other than dark clay?
You can use any fine clay, better to use clay that is used for making bricks.
@@abdallahhegazy2526 this is brilliant idea...thanks alot.
Plaster of Paris works,
Dries fairly quickly and inexpensive.
Please skema
Is it safe? Does it produce any kind of radiation?
It is better than halogen type heating.Little bit radiation occurs...
محمد حسان محمد
شكرا جزيلا لك
He didn't show the battery 12v source. Who knows this id fake or real 😂😂😂😂
This id is not fake.12v supply can be obtained from both battery and other power sources.Thanks!!!
You can get 100 watt power with 12v and 9 amp so it can be real easily.
After all that work and it couldn't cook.
You should increase the number of coil.
இது ஆபத்து இல்லை நல்லா மெத்தேடு லோ கரன்ட்
உங்கள் கருத்துக்கு மிக்க நன்றி.உண்மையில் பாராட்டுகிறேன்.
nice