Thanks for watching. If you found the video helpful then please give the video a like abd subscribe to the channel. You can also follow more of my Micra progress on Instagram @leadfoot_ash
As replied on the other board mate! Waited for some good weather as was getting on floor etc. Today I fitted the resistor chip and my heater is again working on all settings. Thank you!! Brilliant.
Jut used this on my partner's Micra K11, took 15 mins and the part was a tenner. Literally has never worked since we met in 2013! Great video thanks mate!
Forgot to come back and update. did the resistor swap and works perfectly. I still have the same Micra and the heater now still works perfectly. Thank you - Sorry for being so long letting you know it helped. did this last year after watching this video lol
Hi Ash, excellent vid !😉i am now toastie warm and mist free thanks to your easy to understand instructions. I put off purchase at nissan dealers wanted £50!!!! For a card plus fitting costs.... thanks for saving me a bunch of money😀😀
Forgot to come back and update. did the resistor swap and works perfectly. I still have the same Micra and the heater now still works perfectly. Thank you - Sorry for being so long letting you know it helped.
Thank you! Just followed your instructions. The only thing was I couldn’t put both screws back.. only one. Because it didn’t fit the holes.. I’m starting to think I put it in the wrong way..
My windscreen wont heat up seems like no air getting through replaced cabin filter still no difference yet 2 mid front blowers are working but only blowing cold regardless cant get to the bottom of this?any ideas?thanks
I don't know for definite but I'd say it's probably be a dealer only part but I think your best bet would probably be trying to pick up a second hand one
Me again... any chance of a vid. On how to keep micra k11 from the dredded rot?? I have undersealed all of my micras but two have had two go to micra HEAVEN As sills and suspension mountig points rust out.. ps i don't weld so have to pay the going rate😣
I need to replace both my sills and front cross member because they are rotten. I also can't weld so i will have to pay my friend to replace them for me but once i have had them replaced i will definitely do a video on how to prevent it from happening again.
Hi, I have the same problem, fan starts working on 4th position but there is no air blowing in to the cabin. Can be something stucked on the vents pipes?
I think the resistor is definitely broken but you may also have a leak somewhere. The pipes behind the dashborad are just pushed together so they may have come apart
I don't have my micra anymore so i can't check but i'm 80% sure the settings are just controlled by a lever on the back of the switch that moves a flap to block off different air channels. It is like that on most old cars, the air channels are usually just pieces of plastic pushed together so they mights have come apart slightly and you might have a leak which is why the air pressure might not be as good as normal
I've not come across that problem on a Micra before but i have on other cars and it has either been a case of the door not shutting properly or the sensor being broken so it thinks the door isn't shut. Or worst case scenario is the central locking control unit is faulty, it'll just be a case of going through everything one by one to diagnose where the problem is.
@@LeadFootash23 Ok thanks it isnt door not shutting think it the sensor also jave you ever had door freezing so hard cant get in or unlock for half a day tried all kind of lubes etc cant even open from inside other side (i live in a very cold spot other family members cars dont do it any ideas
@@michdale9013 i have the same problem with mine on very cold days. It's worse since i took all the interior out as well, i usuaply end up having to climb in through the boot. I don't know if there's a way to properly fix it but if you know it's going to be cold try putting a cover over the car and it might stop the moisture getting into the door seals and freezing up
Thanks for watching. If you found the video helpful then please give the video a like abd subscribe to the channel.
You can also follow more of my Micra progress on Instagram @leadfoot_ash
As replied on the other board mate! Waited for some good weather as was getting on floor etc. Today I fitted the resistor chip and my heater is again working on all settings. Thank you!! Brilliant.
Absolutley fabulous upload, many thanks. Fixed my mums car today which has been broken for about 4 years!!
No problem, glad you finally got it sorted 😀
Jut used this on my partner's Micra K11, took 15 mins and the part was a tenner. Literally has never worked since we met in 2013! Great video thanks mate!
No worries, I'd have fixed mine way sooner if I'd have realised how easy it was 😂
Forgot to come back and update. did the resistor swap and works perfectly. I still have the same Micra and the heater now still works perfectly.
Thank you - Sorry for being so long letting you know it helped.
did this last year after watching this video lol
No problem, glad it helped you out 🙂
I managed to resolder the tracks on my burnt out one
Worth a go before buying a replacement
Ah fair play, that's a good shout.
I probably wouldn't have attempted that with the state of my soldering 😂
Hi Ash, excellent vid !😉i am now toastie warm and mist free thanks to your easy to understand instructions. I put off purchase at nissan dealers wanted £50!!!! For a card plus fitting costs.... thanks for saving me a bunch of money😀😀
Glad it helped you out 😀
Thanks for the excellent vid mate. Just fixed my K11 heater ready for winter so I'm dead chuffed now!!
You're welcome mate, glad it helped 😁
I just followed your instructions and WOOHOO heating works, ty for a great video x
Brilliant easy to follow. Will order the resistor next week and give this a go.
Forgot to come back and update. did the resistor swap and works perfectly. I still have the same Micra and the heater now still works perfectly.
Thank you - Sorry for being so long letting you know it helped.
Is there a problem if I install reversed?
Very helpful - really kind of you
Just did mine in 5 mins, thanks mate.
Thank you! Just followed your instructions. The only thing was I couldn’t put both screws back.. only one. Because it didn’t fit the holes.. I’m starting to think I put it in the wrong way..
Climbing in through the boot that's worse than me. Someone said the seals must be. Worn which seal's would that be are they replaceable
Thanks man! Very helpful video.
No problem, glad you found it useful 😁
good video thank you
My windscreen wont heat up seems like no air getting through replaced cabin filter still no difference yet 2 mid front blowers are working but only blowing cold regardless cant get to the bottom of this?any ideas?thanks
If they're only blowing cold it might have air lock in the cooling system or the thermostat might be stuck open
Done this about 3 times before! Haha, nice vid bro
Thanks mate, i didn't realise it was so easy to do.
Thank you for the video, it helped me, too. ❤️
No problem, glad it helped you 😁
Hello i have some similar problem but on my everything works except second speed....is it same thing or?Thank you
Yeah it'll most likely be the same thing
@@LeadFootash23 oh thank you a lot buddy,that drive my crazy last year trying to find problem :(
hye bro.. did u know where to buy or oder interior fan casing? cause mine is broken..
I don't know for definite but I'd say it's probably be a dealer only part but I think your best bet would probably be trying to pick up a second hand one
Thanks for the vid Ash. My Micra just started this problem about a week ago. Saves me searching the Micra sports club page 😂
Me again... any chance of a vid. On how to keep micra k11 from the dredded rot?? I have undersealed all of my micras but two have had two go to micra HEAVEN As sills and suspension mountig points rust out.. ps i don't weld so have to pay the going rate😣
I need to replace both my sills and front cross member because they are rotten.
I also can't weld so i will have to pay my friend to replace them for me but once i have had them replaced i will definitely do a video on how to prevent it from happening again.
Hi, I have the same problem, fan starts working on 4th position but there is no air blowing in to the cabin. Can be something stucked on the vents pipes?
I think the resistor is definitely broken but you may also have a leak somewhere. The pipes behind the dashborad are just pushed together so they may have come apart
Does this work for the blowing settings as well as mine won't work on the window screen
I don't have my micra anymore so i can't check but i'm 80% sure the settings are just controlled by a lever on the back of the switch that moves a flap to block off different air channels.
It is like that on most old cars, the air channels are usually just pieces of plastic pushed together so they mights have come apart slightly and you might have a leak which is why the air pressure might not be as good as normal
Nice one. I didn’t know and changed my heater switch but didn’t work now I know is because of resistor chip/module
How much this unit
thanks. Easy fix. Handy link!
My central locking was unlocking and relocking in seconds so much so had it took off drivers door any idea how to fix
I've not come across that problem on a Micra before but i have on other cars and it has either been a case of the door not shutting properly or the sensor being broken so it thinks the door isn't shut.
Or worst case scenario is the central locking control unit is faulty, it'll just be a case of going through everything one by one to diagnose where the problem is.
@@LeadFootash23
Ok thanks it isnt door not shutting think it the sensor also jave you ever had door freezing so hard cant get in or unlock for half a day tried all kind of lubes etc cant even open from inside other side (i live in a very cold spot other family members cars dont do it any ideas
@@michdale9013 i have the same problem with mine on very cold days. It's worse since i took all the interior out as well, i usuaply end up having to climb in through the boot.
I don't know if there's a way to properly fix it but if you know it's going to be cold try putting a cover over the car and it might stop the moisture getting into the door seals and freezing up
Good job. Thanks for the help.
Good man, thanks
Thank you
excellent thanks
Legit🤙 thank you
Not working 🤒🤕
Omg mine been broke 9years lol
dzięki
Good easy fix :-)
Boom done cheers