Life isn’t always a race! Slow down and enjoy the ride. I have to tell myself that a lot, one day I’ll figure it out! I’m battling mice as well! Now that’s not what the Milwaukee was designed for lol. Hmm 2 more “ huh 😂.
hi there around that time they were moving into gas and diesel from steam , in there books there was not much on it , an i think it was a different hp .there were so many factors ,now days 100 is a nice place to work around , john
Before the two "turn downs" of the log, you should have made one more board on each side of the log before turning (2 more boards). Don't "wear the log out" by turning much too quickly, as a few mills do!!! Stick the log in the saw and get it done...like Mike McCoy sawed, faster and efficent!! Don't be afraid of it! Just a little bit of constructive criticism, I'm certainly not trying to be hateful, just making a point.😃 Thanks for the video. Love watching you saw, one of my favorite UA-cam mills.
hi there i ran out of blade at the top ,and the low knot was hitting the mandrel / collar . Mike had a lot higher bed hight and a 60 inch saw along with a log turner and help .like Mark . so there is a hole different way of looking at a log and sawing ,as well , thanks for dropping in john
Happy Anniversary John and Sara! The hat is back! Yay! You broke that rachet strap when you manually pushed the carriage back. I thought I saw a buch of sawdust on the conveyor before you started. Were you shovelling it from under the mill? Bill
hi there first thank you , i saw the strap brake when i watched it later , must have been very week for me to do that , and yes i was in the pit , john
The strap broke when you pushed the carriage back. You turned the log without it. BTW, I liked your top saw, the Milwaukee one. You could do that again. If you had a laser it would tell you exactly where to cut.
Happy anniversary to you and your wife, and hope you have many many more. In as far as the tired thing, that's life. So you have to slow down and take it easy then so be it. As long as you still enjoy what you are doing.
good video and job yes i made it till the strap broke when you pushed log back. so hot here i have not ran sawmill in a month did cut some trees down for cow to eat leaves. glad you had a happy anniversary.. take care, be safe and well.
I made it to the end. Keeping your cardio up by trying to manhandle these big poplar logs. I think I figured out my mystery mill. Best I can tell is it's a J.A Vance mill. I'm not positive but looks the closest by watching 746 different saw videos
@fricknjeep you've already been a bunch of help, just by listening to the things you say in your videos. I managed to find a PowerPlant I think, now gonna have to start laying down some timbers and putting the puzzle together.
Well you know what they say, a sawyer's work is never done. When you're awake, you're sawing logs. When you're asleep, you're sawing logs.🤣🤣 Good show!
John I really like your processes, you have ways of working easy and saving effort and they work well for you! I really enjoy the diversity (corny I know) of the you tube saw millers. We have all sorts of mills and operations and each is interesting in the way the sawyers solve the same problems. ❤
Happy anniversary John and Sarah. My wife and I will celebrate our 48th anniversary in a few weeks. Hard to believe they put up with us that long. Many more to you 🎉
Life isn’t always a race! Slow down and enjoy the ride. I have to tell myself that a lot, one day I’ll figure it out! I’m battling mice as well! Now that’s not what the Milwaukee was designed for lol. Hmm 2 more “ huh 😂.
hi there i have slowed down but not by choice .way behind on to many things , part of getting old . thanks so much for stopping by . best to all john
Happy Anniversary! Your a fast as you once was, just at what? 😂 Thats what i ask myself sometimes 🪵👍🏼🇺🇸
hi there but not sure what that is , glad you stopped in john
I bet you said awh shucks when you saw how the strap broke, great video and boards, thanks.
hi there well it held , it was a old junk strap , thanks john
Did Frick have a recommended horsepower? I was thinking of what was out there around 1930 for a powerplant.
hi there around that time they were moving into gas and diesel from steam , in there books there was not much on it , an i think it was a different hp .there were so many factors ,now days 100 is a nice place to work around , john
Happy anniversary 👍🏻👍🏻
I watch every second right to the end. Big log.
Have a great Friday. 👍🏻👋
hi there it is great to hear that , thanks so much , best to all john
Congrats john, keep them coming!😂
hi there sure hope show , thanks for dropping in john
Happy Anniversary John and Sarah . Hope you had a great day.
hi there thank you we did . john
Nice looking lumber Mr. John. And Happy Anniversary.
hi there .Glad you liked it and thanks for dropping and leaving a comment , best to all john
Hi John. Happy Anniversary! 👏👏👏👏 You & sawmill will be fine. Old geezers! 🙄😐😑 Nice looking popular lumber. See you on the next one. 😍😊😊👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻
hi there thanks for everything , best to all john
Before the two "turn downs" of the log, you should have made one more board on each side of the log before turning (2 more boards). Don't "wear the log out" by turning much too quickly, as a few mills do!!! Stick the log in the saw and get it done...like Mike McCoy sawed, faster and efficent!! Don't be afraid of it!
Just a little bit of constructive criticism, I'm certainly not trying to be hateful, just making a point.😃
Thanks for the video. Love watching you saw, one of my favorite UA-cam mills.
hi there i ran out of blade at the top ,and the low knot was hitting the mandrel / collar . Mike had a lot higher bed hight and a 60 inch saw along with a log turner and help .like Mark . so there is a hole different way of looking at a log and sawing ,as well , thanks for dropping in john
Happy Anniversary John and Sara! The hat is back! Yay! You broke that rachet strap when you manually pushed the carriage back. I thought I saw a buch of sawdust on the conveyor before you started. Were you shovelling it from under the mill?
Bill
hi there first thank you , i saw the strap brake when i watched it later , must have been very week for me to do that , and yes i was in the pit , john
Your a hard working person , John
hi there only for a little bit each day , thanks for dropping in john
Happy Anniversary John
hi there thanks it was nice , john
The strap broke when you pushed the carriage back. You turned the log without it. BTW, I liked your top saw, the Milwaukee one. You could do that again. If you had a laser it would tell you exactly where to cut.
hi there the top saw thing didn't do to bad , hahe to look for the strap brake , thanks for dropping in john
Hey wood lovers, you must watch this video, I can fall asleep now😂
hi there thanks for dropping in john
Happy anniversary to you and your wife, and hope you have many many more. In as far as the tired thing, that's life. So you have to slow down and take it easy then so be it. As long as you still enjoy what you are doing.
hi there thanks and still like sawing , john
good video and job yes i made it till the strap broke when you pushed log back. so hot here i have not ran sawmill in a month did cut some trees down for cow to eat leaves. glad you had a happy anniversary.. take care, be safe and well.
hi there good eye i saw that later , thanks for dropping in john
You broke the strap when you pushed the trolley back. Good job John.
hi there yep i saw it that night , glad you stopped in john
your still making fine timber Chuck UK
hi there thanks for stopping from a long way , best to all john
I really enjoyed this video, I am learning to run the mill at our museum and found your presentation informative
hi there always good to here it helped , thanks for dropping by john
That's not a can't hook . That's a peavy. A can't hook has a blunt end and a peavy has a spike.
hi there yes i know i was more just saying about what turns the log , john
Nice strap on 😂😂😂
hi there thanks for dropping in john
Its called a cant because typically you can't use it for nothing until you do more milling on the cant to make something useful out of it.
hi there you may be right , thanks for dropping in john
I made it to the end.
Keeping your cardio up by trying to manhandle these big poplar logs.
I think I figured out my mystery mill. Best I can tell is it's a J.A Vance mill. I'm not positive but looks the closest by watching 746 different saw videos
hi there that is a good start and the easy part , if i can help let me know , john
@fricknjeep you've already been a bunch of help, just by listening to the things you say in your videos. I managed to find a PowerPlant I think, now gonna have to start laying down some timbers and putting the puzzle together.
Well you know what they say, a sawyer's work is never done. When you're awake, you're sawing logs. When you're asleep, you're sawing logs.🤣🤣 Good show!
hi there never heard that good one , thanks for stopping in john
Hey John, happy anniversary. Stay safe. Wayne
hi there sure will try to , thanks john
John I really like your processes, you have ways of working easy and saving effort and they work well for you! I really enjoy the diversity (corny I know) of the you tube saw millers. We have all sorts of mills and operations and each is interesting in the way the sawyers solve the same problems. ❤
Happy Anniversary John and Sarah! Hope your day was grand! Take care and stay safe! God bless!✝️🙏🇺🇸🇺🇸🇺🇸
hi there we had a nice night out to dinner , thank you john
Happy Anniversary guys
hi there we had a good one , thanks john
Happy Anniversary
hi there thank you john
Great work John
hi there Glad you liked it and thanks for dropping and leaving a comment , best to all john
Happy anniversary John and Sarah. My wife and I will celebrate our 48th anniversary in a few weeks. Hard to believe they put up with us that long. Many more to you 🎉
hi there i know what you mean , thanks for dropping in john
Happy anniversary Mr John, you don’t have to saw fast, just keep sawing the way you enjoy doing it and we will enjoy watching.
hi there so glad you dropped in thanks john
club med to me
hi there thanks for dropping in john
Nice job
Glad you liked it and thanks for dropping and leaving a comment , best to all john
Good one John.
hi there thanks for dropping in john
Made it!😄
hi there great to hear , thank you john
There's just something about the way you saw logs that is satisfying. Keep up the good work.
hi there i guess it is just the old way , thanks for dropping in john
always make it to the end... keep 'em coming! Thanks!
hi there glad to hear that , thanks john