How to make the Bart Simpson skateboard - DIY skateboard
Вставка
- Опубліковано 27 вер 2024
- In this video, I make a DIY skateboard but also show how to make Bart Simpson s iconic skateboard. Using an old skateboard deck with trucks, wheels bearings, hardware, and grip tape coming from Amazon.
here's part 2 • How I Made The Bart Si...
Products I used in this video:
Skateboard Parts
Trucks and Hardware amzn.to/2XTP11W
Pink Wheels 59mm and Bearings amzn.to/2XTxnvd
Griptape Green amzn.to/2XQVs5P
Griptape Orange amzn.to/2JVMRVT
Deck (if you don't have a used one) amzn.to/2SxuTNi
Spray Paint
Rust Oleum fluorescent green amzn.to/2XVMXqj
Rust Oleum filler primer amzn.to/2XP8rFc
Rust Oleum vintage teal amzn.to/2YbX6OV
Tools
B&D Jig Saw (updated version) amzn.to/2FjkPSo
B&D orbital Sander amzn.to/2Sxv4YY
Belt Sander amzn.to/2XiIahu
Sharpies amzn.to/2ITtLPE
Stabilo blue pack of 12 amzn.to/2XlA9It
Camera Equipment
Canon t6i amzn.to/2LfL6Xl
As an Amazon Associate, I earn from qualifying purchases
at no additional cost to you.
__________________________________
PAINTINGS AVAILABLE FOR PURCHASE
irongordon.bigc...
__________________________________
FOLLOW ME ON
Instagram: goo.gl/sNo2wQ | @iron_gordon
__________________________________
EMAIL ME
irongordonart@gmail.com
__________________________________
Music: “ther for ya" and "swing low" by Birocratic (www.birocratic.com)
The songs used in this video were licensed via Birocratic License v05.2016. For info on how you can use this music in your project, check out www.birocratic.....
To download Birocratic’s 60+ song discography, visit birocratic.bandcamp.com.
#bartskateboard
I’m obsessed with this skateboard! Well done, you definitely did Bart’s board justice. 🛹👍
Ha ha thank you so much!
It looks so iconic, even if you don't immediately recognise why! Great job, looking forward to part 2.
Awesome, thank you! Part 2 coming... Eventually haha
I’m gonna try making this
This channel is so underated I feel like it should get more subs
I love this board so much that i had to make one myself, but with different graphics and color and i love the way it came out. Thank you so much
"Eat My Shorts" awesome work mate, congrats on the 1k 👍👍👍👍👍👍
"Don't have a cow man!" Hahaha thank you!
You ARE an expert 👍 also, Dude you said Butt 😁
Haha quite the sailors mouth! there goes my monetization 😆
This looks awesome. Funny enough the skateboard Bart has on my key chain has an all purple underside of the deck, including trucks and wheels. Yet the griptape is still green but with a purple middle stripe. Now obviously from a manufacturing reason its just easier to do it this way for moulding and mass production. I like to think of it as Bart simply has multiple boards and just has a very specific taste in regards to his setup with slight variations per board. My rambling aside, I loved the project and video you made.
Definitely has to be a manufacturing thing. But I like your thought better on Bart having multiple boards according to his taste 🛹
I appreciate you watching and commenting 👊
Cool little project..cool collectables.
It's such an iconic skateboard, it's on the spray paint can
I've got a deck with a chip in!!! I'm Gona try do this myself 👌
You are the most underrated Content creator of ever seen
Hey thanks for saying that! Share my content and spread the word😃
That's sweet! I love the Simpsons :) You did an amazing job mate! :)
Thank you! Me too, I think I'm going to make a couple more Simpsons themed art pieces in the near future. Such a good show.
Now I know how to make a old school shaped deck 😂
That's one of the coolest things I've ever seen..
Edit: no it's not.
Damn this board looks good gret job bro
Appreciate it thank you!
At my local smyths, they sell skateboards that have no concave and have shitty wheels and trucks but they cost around £12.99 (or 15 usd) so im going to make it into an old school shaped board and use my proper trucks and bearings, as well as my cruiser wheels i took off a cheap penny board. this will be a fun project
Defiantly a good idea. Here's a video I did that shows how to cut the board down to this shape ua-cam.com/video/6i989wUn6XE/v-deo.html
Gr8 piece of work. 👍🏾
You did great job 👌
Thank you sanatsal !
Very Very good Man😀 old School Cartoon board haha
Grande abraço do Brasil são Paulo
i love that skate board realy good content
Bruhh i have the same one as him loke the old skool style i thought it was stupid but now i again started lovong it
Yeah Definitely, it is a fun shape. The old school boards are impractical for modern tricks but just for kicking around on, hours of fun
Don't have a cow man!! How 'bout them 1k subs!?!!🙌
Eat my shorts! Woo woo 1k! thanks man pretty excited, but that watch the isn't even close for UA-cam paychecks hahaha.
@@IronGordon LOL, yeah...that's how I heard it goes. That watch time is a killer!
It's all a game haha
@@IronGordon Haha yeah, a super complicated game of chess!🤯
Thanks so much i actually made it and its awesome
Awesome, that's great to hear!
COWABUNGA!!! 🤙🏻
Thank you very much for this, I will definitely do the same
Wow this is so cool
Instant subscribe. That’s how cool you are
Yes thank you!
Love it man just love it!
Thanks my guy I appreciate it!
I really need to make one of these lol
Do it man, it's really easy! Good luck
Thanks and i'll see if I can find the stuff needed lol
I am gonna try to make this for Christmas but do you no what size truck those were thx
they were just regular sized trucks check the link in the description for details
5:02 that looks like it would feel like pushing the marble in those Japanese soda things
I love this complete but tbh I think you should use risers bc with those wheels your probably gonna get wheel bite.
I know you said that it's more of an art piece, but do you buy chance know if there's any wheel bite with this board?
I did build another one of these boards for a client and I used 1/2" risers on it to avoid wheel bite. If you're using regular size wheels 55mm or smaller you probably don't need risers
Iron Gordon - Art Thank you so much for the video and for responding, incredibly helpful!🙏
You should try his new board with the red stripe and the wood also great job
Nice!
Thank you this was a fun one!
Could you make Marty Mcfly’s skateboard from 1985?
actually I've been working on it haha
Hey I love the design of this I’m gonna make one just a quick question could u make the with out power tools
thanks you can, you would need to get something like a compass saw to cut curves with, and it would take quite a while to make the cuts
here's a video where I show you how to make the board, but I'm still using power tools but I provide a free template to follow ua-cam.com/video/lb_WPDNut48/v-deo.html
Good Luck!
You should spray paint the bart skull
Oh yeah that's a good idea Larry!
How much u spend making it
Bad ass man!
I made this and I looks good on my wall
Nice!
Dope as hell!
Ha thank you !
Looks cool no nothing about skate boards . But what ever you'll sort it take care buddy 👍
Hahaha I appreciate your honesty and you being here
Amazing👍👍
So I recently ordered the parts cause I would like to make my own, may I ask how long you made your board? I know you said 24”-28”
Awesome! Mine came out to be 25.5" long, because I wanted to utilize the factory bolt holes in the deck. From the forward most bolt holes the board has a 3" nose. Good luck let me know if I can answer any more questions!
Iron Gordon - Art thanks so much for responding!! I’ve looked into making one for years and the replicas I’ve seen online weren’t the greatest, you’re was the MOST accurate, hell I even think it’s more accurate than the Santa Cruz one from almost a decade ago!!
@@HyperIntake13 ha ha that's great, thanks for the kind words! I watched a lot of episodes trying to catch glimpses of Bart's board and the variations that I saw where either purple or pink wheels, and in the newer seasons his board is brown instead of green. Something I would do differently is make the orange grip tape strip wider, when I went to tighten the hardware, the grip tape wanted to come back off... Little detail
Iron Gordon - Art I’ll definitely keep the strip size in mind for my build, in my honest opinion I believe his wheels were always meant to be pink however in the earlier seasons it was harder for them to nail a hot pink color that he has hence why certain episodes they look purple and others look brighter, much how the family car in older episodes is a much much darker pink than it is now
@@HyperIntake13 that's a good point, back in the day it probably wasn't as tightly brand regulated and was just the discretion of the artist at that time
Since me birthday is coming soon I might as well make that. I've been trying to get back into skateboarding.
Awesome, do it!
So nice imma do this too!
Is there any way i can commission one?
This is sick. Could you make me one of these and I pay you?
Walkman diy guardians of the galaxy
Can I use it as a cruise board?
Yeah it'll work as a cruiser here is a how to video I made that shows you how to make your own ua-cam.com/video/6i989wUn6XE/v-deo.html
Do a kick flip!!!
I tried....😒
Wow cool really the same very love it good job bro !!
Thank you very much!
Bro ima need that
Verry cool! I subt i love it!
Thank you very much!
Naaah bro, for the video to be perfect you should show this beast rolling
bro youre over here making my google devices answer your questions lol type that shit in
Ima spray paint it green and orange but instead of pink I'm putting purple wheels 👍
Cool idea
Perfect
Thanks!
Sick
Hey thanks Jay!
Iron Gordon - Art no prob bro that’s a nice ass board
Barts board would have some nasty razor tail, quick whip out a sander.. lol
Santa Cruz actually made a limited run of the Bart board a couple years back, and this actually looks better than theirs lol
Ha thanks! Yeah I've seen theirs, it's nice. I'm more of a diy guy 👊👌
I found the Santa Cruz deck for cheap so I just bought the bart deck
good find!
I think it's criminal how much people online are charging for the Santa Cruz Simpsons boards!
How much did this cost in total
L
all the parts probably around $75
but the labor and the time spent to do everything is the biggest cost
as Smithers would say:
I want it, I want it, I want it, I want it, I want it, I want it, I want it, I want it, I want it.
Iron gording I’m the person you made this skateboard for
Enjoy!
I just opened the box with the skateboard and it cool and thanks for the sticker
It god
Blue eyes?
3:20 a turkish flag ha ?
Haha looks like it! It was a surprise to me too
Iron Gordon - Art please do a DİY PENNY BOARD !!
Fine but get better trucks...
If I wanted to ride an unfunctional board, I'd be a longboarder...........
Ha!
@@IronGordon Just joshing ya. 😜Good work!
Appreciate it👊
Oha len 2.3 de Türk bayrağı çıkıyor köpekler
türk bayrağına çok benzer. Bu bir Amerikan şirketi Vakıf isimleridir. Bunun için google çeviri kullandım
@@IronGordon teşekkür ederim bilgi için güzel de bir video ama yine de inanamadım hangi vakıf olduğunu merak ediyorum .Bunun için google çeviri kullandım
@@IronGordon thank you for the information is also a video but I still wonder which foundation I could not believe. I used google translation for this
@@emredemirtas1533
Learn to pronounce
Vakfı, Amerika Birleşik Devletleri'nde Kaliforniya'dan bir kaykay markasının adıdır. Türk bayrağını logo olarak kullanmaları çok komik.
Bir kaykay mı yapıyorsun?
dont buy amazon trucks!! 🥵
dont buy anything skateboarding things on amazon!
That watch though 🤮
What size is the deck before you cut it?
I think it was an 8 inch. Here is a video I just did where I provide a downloadable template to make this board ua-cam.com/video/6i989wUn6XE/v-deo.html
Iron Gordon - Art Ol thanks can’t wait to make one of these
Bro your so underrated
Appreciate it man, thank you. New video out tomorrow, check back in and let me know what you think!
You’re*
I love this video
You’re *
Oskar Slater ok Oskar
Skateboarding, the Simpsons, making stuff, and making UA-cam videos. 4 of my favorite things rolled into one video.
After you watch this here's skateboard themed painting I did ua-cam.com/video/MGS0QQTp2H4/v-deo.html
And here's how to cut your own
ua-cam.com/video/6i989wUn6XE/v-deo.html
I buy this for 50$
@@b1eed1337 thank you but I'm hanging on to this one right now
When you said "ok google" my Google assistant came on 😂
Ha Ha! I had to put my phone in a different room when I was editing the video
Well if I saw that in the wild I would think it was a BART board , so I’d saw you did a good job. 🤘🏻
What size board do you use to cut the pattern? And how big is it after cutting the mold? Is it small or big? I wanted to make one for me to walk.
bro start selling then I need one it the perfect board for me
How long are these cruisers I was thinking of making one that is short enough to fit in a back pack like 19-20 inches or maybe a cargo bag.
I think they came out to be like 24” but you could cut it down to be as short as you want. You would just need to re-drill the bolt holes for the trucks
Dude!!! Your version is way the hell better than the cruiser that came out for Santa Cruiz 👍🏽
jeez now I cant wait to see the graphics on the nxt video! it came out so great and so true , you did an amazing job man and I enjoyed the first part humor you too. Blue eyes... pfff 😁
I'm starting the graphic today... Should be take too long to get done, hopefully 😅. I know right that was the first time I have ever heard of his eyes being blue! Thanks for watching
The first time I swam this I screamed dad were building Bart Simpson skateboard
Ese más bien parece una penny board en vez de skateboard
Hola , en verdad quedó chida , parece nueva.
what are the measurements to cut the skateboard?
I made one! Although it was only the deck, I bought a bart Simpson sticker off of amazon for the bottom of the deck. Now a great art piece on my wall!
Very cool!
sweet man
this is dope!!! nice job dude!!
👌NICE 👍
It almost looks like the skateboard of killua
It does!
The basis I see is that it's a prolonged cemetery headstone but making it from a popsicle common board was a good idea for concave & kicktail for reinforcement 😎 like many to all 80's boards sold today have modern concave 😎
Edit: I bought a Lozenska 26 inch skateboard 🛹 destined for pets but it resembles the Bart Simpson skateboard nearly 💯 but not 💯 (rounded corners at the tail)yet close enough.They came with 6mm risers I added another 6mm risers & use Sector 9 Nineballs wheels 61mm 78a and 32 Contact Patch WORKS THE BEST with these 😎💯
Early 90’s? Lol no dude, we had double kick decks already in 1990. Bart’s board is based on the “pig shape” of the early 80’s.
Surprised I've never seen anyone else do this till now, very cool my man will definitely have to make myself one now
One of my fab sk8board characters also TMNT Michelangelo.
Awesome video liked keep up the good work and stay connected and sorry for the inactivity 🙏🏼
Thank you for liking and commenting I appreciate you!