Mode for grouped data (descending order)

How to find the mode for grouped data in decreasing order.

[@austinmash5209]

I suggest that you delete this video cause you failed to get the correct values for D1 and D2

[@rachelraterta85]

I learned how to find the mode for grouped data in decreasing order and it is fast and easy to understand.

[@mfadhilal-fatih1427]

Tell me pls

[@shyakaenock4049]

What if the mode class is at the last raw. How do you get D2.??

[@wzupppp]

Short and simple, thanks a lot.

[@MwansaJoy-wb9jq]

It's data is in decending order

[@lancemjjl]

what if the D sub 2 doesnt have any number above them

[@joseliacasajuras3390]

This video really helps me thank you sir

[@kaedehara8992]

I learned how to get the mode for the grouped data but in a decreasing order.
-Amorsolo

[@lovelyannmanaytay5780]

In this video, I learned how to get the mode for the grouped data in decreasing order
Venus

[@frederiklabad3603]

I have learned how to find the mode for grouped data in decreasing order

[@maesaluba8695]

This vedio helps me alot

[@InquisitorBoomBoom]

This saves me alot time and easier to digest the information. In my college class, it takes about one hour but still cannot understand a damn thing.

[@aisabaringsabrido5083]

Paano po pag dalawa ang highest frequency?

[@richardadamwais9734]

just english

[@james-vj8og]

i didnt get in time for a class so thank you so much for this video!

[@xianwhite5538]

Baliktad ka naman. Mali mali mga tinuturo mo. Si D1 ay 14-8=6
D2 ay 14-7=7

[@emmanuelescol]

Try to check whether the class intervals are written in ascending or descending order.

[@elladeguzman7054]

How to interpret this the final answer?

[@MaEloisaBCula]

How to find the frequency?

[@ellecamilet9833]

What if there are two mode
Example the frequency 14 is in grouped 26-30 and in 16-20 what are you going to do?

[@emmanuelescol]

In my class, I simply prepare examples with one mode. This formula is best with one mode.

[@lazyjuice8796]

Where do you get 0.5???

[@monop7777]

(2)

[@Yleonor2]

Its a rule

[@kimarvinmutia2913]

for this video, i learned how to find the mode for grouped data in decreasing order.

[@merianegalang6813]

Same

[@AbhishekMishra-nd5do]

Metoo

[@iyallanto8599]

Lodi kita kuya

[@peanutsband27]

Naol lodi si kuya

[@ErronAgarcio]

What if there's two same high numbers in frequency?

[@gabriellefelofaustino1910]

In solving the i...where did you get 21 and 16?

[@jenniferofalla3875]

Sam question here,i repeat many times but i didn't get it😔

[@AppleMaeTCambe]

Upper and Lower boundary
Upper 20 + 1 = 21
Lower 16
21 - 16 = 5

[@smtccbr]

Paano po nakuha yung (35/13)?

[@phelokazithole39]

There is only one thing that I struggle to understand, that 0,5
where is it coming from?

[@haddes_yolo]

it is the lower class boundary

[@sadhnamehndidesigns2336]

Sir upar se class start krke ek question solve kriye jese 21-25 first ho uske bad neeche jaye

[@Rose-zp3ki]

how to compute mode, if the highest frequency is in below?

[@知否知否]

If the highest frequency number have two?

[@mikunakano2226]

thank you very ur saving me

[@jnahnnagoles9208]

I have learned how to find the mode for grouped data in decreasing order.

[@gregapat2117]

How did you get the frequency?

[@mr.acemanditv5972]

I think D1 will be difference between modal class subtract to upper class 14-8=6 D1 is 6 D2 is 7.

[@MwansaJoy-wb9jq]

No it's 7 because the class boundary is arranged in decending order

[@ardztayag]

the i(interval) is wrong.the right way to get it is by counting the spaces from the lowest class to the modal class and that is the interval can you please me? im confused

[@emmanuelescol]

Example: 16 - 20 means 16,17,18,19,20 How many numbers? It's 5. So i = 5. "i" is also the difference between two consecutive lower limits or consecutive upper limits .
Example: 21 - 16 = 5; 25 - 20 = 5

[@侯善平]

How to understand the formula when D1 is zero or D2 is zero or both D1 and D2 are zero？

[@OninabResources]

It's not possible for this assumption.

[@RaiaDecampong]

Sir how did you get the 2.69?

[@princesspineda8884]

Thanks po sir

[@irishreyes5786]

hello i hope im not too late to ask this but what if the modal class is in the bottom like really at the last column? how will i get the D1?

[@emmanuelescol]

the frequency is 0

[@Aly-iw8ow]

grabe bat ngayon ko lang kayo nakita HUHUHHUHU

[@Aly-iw8ow]

edi sana natapos ko na to kagahapon pa WHUAHHAHHA SALAMAT PO GALING kahit english AHHAHAHHA

[@cyrilbarliso5649]

Your answer is not the same on my book even if they had same values

[@emmanuelescol]

yeah. I followed the steps from other sources in finding Di and D2. D1 is the highest frequency minus the frequency of the next lower class while D2 is the highest frequency minus the frequency of the next upper class.

[@cyrilbarliso5649]

@@emmanuelescol what do u mean by lower class?.. is it like for example 26-30 then its lower class is 21-30?? Its bcz it has smaller value?

[@emmanuelescol]

@@cyrilbarliso5649 yes.

[@emmanuelescol]

@@cyrilbarliso5649 Yes.

[@cyrilbarliso5649]

@@emmanuelescol oki tnx

[@حازم-ف1ل]

Thank you😴😴

[@kellypaschal1697]

You wrong

[@lovelylegada2735]

Paano po nakuha ang 35/13?

[@hydrogen4912]

what if there are the same frequency like, the highest frequency is 6 and there are also other 6 which modal class will i choose?

[@jmjournal]

Both

[@antoniussugianto7973]

Sir i think D1 = 6 and D2 = 7

[@jhnryvlgn]

agreed

[@breachcodm2221]

ye

[@MiguelEmbonJrPM]

how come. please enlighten me 🙏

[@collbaconnoobe]

​@@jhnryvlgn bruh its D1 = 7 and D2 = 7

[@collbaconnoobe]

bruh its D1 = 7 and D2 = 7

[@xianwhite5538]

Mali!!! Si D1 dapat ay Exceeding tapos si D2 Succeeding..

[@emmanuelescol]

Try to check whether the class intervals are written in ascending or descending order.

[@freja2640]

Paano niyo po nakuha yung 35/13?

[@shei_la13]

Sir paano po makocompute ang mode if there are 2 modal classes? Thank you po.

[@emmanuelescol]

You cannot use this formula.

[@marichu8722]

Have question sir, how about if the highest frequency of the mode is place at the top ? Should my D2 is 0?

[@jonielaineborillo1838]

SIR MALI NAMAN PO ITO. BALIKTAD YUNG D1 AND D2. TAPOS SA ISANG COMPUTATION IBA YUNG FREQUENCY MO SIR

[@emmanuelescol]

Thanks. I used the same data but I used other authors in computing the mode.

[@antoniussugianto7973]

@@emmanuelescol sir i think D1 = 6 and D2 = 7

[@eleazartimbrizuela4045]

how did you get the (35/13)????

[@lovelylegada2735]

Same question

[@imgray143]

It's the calculator ✌️😅. It's the 7/15 × 5 = 35/13

[@Rxnch]

My formula have different symbols than yours. My formula is:
Mode = La + [D1/D1+D2] i

[@antoniussugianto7973]

He made mistake, it should be D1 = 6 and D2 = 7

[@shawalnyaroya3501]

@@antoniussugianto7973 he made a mistake i didnt finish watching

[@bienmarlatoja7404]

Pano po pag yung highest frequency ay nasa taas po

[@emmanuelescol]

zero ang frequency above that highest frequency

[@bienmarlatoja7404]

@@emmanuelescol thank you

[@christiannuque2810]

Thanks man help a lot

[@ugbogoroejiro259]

Thank you,it was so easy to understand

[@ley3136]

Thank u

[@creppermint384]

how to compute the mode if the highest frequency is second to the lowest?

[@Faomidigitalmarketing]

You can still get your mode, what if mode is the last class interval

[@rodenaepil6821]

thank

[@ethanbiagcong8357]

i learned how to find the mode for grouped data in decreasing order.

[@qusaykahla388]

Thank you so much

[@hcirejhy]

Thank you, ,,👏👏

[@felipebriana5227]

Very clear explanation!

[@anamare8410]

why did you minus the lower limit to 0.5?

[@clarkemploymentreport3282]

To get the lower boundary

[@gadaha15]

How to get the (i)

[@emmanuelescol]

subtract two consecutive lower limits. examples: 21-16 = 5, 26-21 = 5, 31-26 = 5

[@bulletgasm8219]

Mali Yung D sub 1 mo

[@newgist9ja288]

I thought i would be 4