Depending on the control system you are on. If you are wired directly into this specific control card, your IP address on your computer must be on the same address. For example, you will need to set your IP address on your computer to 192.168.1.XX (XX being any number, try using 99, or 101, something between 10 and 120). This typically solves this issue. Make sure your computer is not connected to another network or wifi with the same IP, or it will not find your device. And make sure you have a good cable to start with.
This video is targeted for ribbon cable and power cable connections. What remote are you referring to? You can contact our office for additional support www.maxxlite.com
Good video with good explanations..
That was very informative. Thank you for taking the time.
How do you fix the LAN connection from computer to screen
Depending on the control system you are on. If you are wired directly into this specific control card, your IP address on your computer must be on the same address. For example, you will need to set your IP address on your computer to 192.168.1.XX (XX being any number, try using 99, or 101, something between 10 and 120). This typically solves this issue. Make sure your computer is not connected to another network or wifi with the same IP, or it will not find your device. And make sure you have a good cable to start with.
@@haithamsitto I Will Try This then i will get back to you
What is the E100 error code in LED board?
These do not have E100 error code or other error codes.
The the remote is not responding
This video is targeted for ribbon cable and power cable connections. What remote are you referring to? You can contact our office for additional support www.maxxlite.com