Overhead DVD advent 17' Pacifica install

Поділитися
Вставка
  • Опубліковано 28 бер 2018
  • Alleycat Electronics effingham DVD pacifica

КОМЕНТАРІ • 10

  • @charitygritts6030
    @charitygritts6030 2 роки тому

    I just purchased a 2017 Chrysler Pacifica that had an aftermarket Advent DVD player put in. It did not come with the auxiliary cord for the sound or the headphones of course. Can I just purchase any auxiliary cord to get the sound to work?

    • @kyleharden5260
      @kyleharden5260  2 роки тому

      the advent unit has a built in wireless FM modulator that can be turned on via the wireless remote. The button I believe is in the bottom corner of the remote. IR is the headphones on/off , seems like it is labeled fm. otherwise the specific cable for the audio out is specific to the unit and located above, then could be extended to the front aux like I do on all these pacificas

  • @mguerramd
    @mguerramd 3 роки тому

    I want to get 12V power out of my overhead console to power a Valentine One radar detector. It's a much cleaner install than running a power cord up from the dash or center console unit. Do you have a video showing how to remove the overhead console? Mine is a 2017 Pacifica Limited.

    • @kyleharden5260
      @kyleharden5260  3 роки тому +1

      easiest location to get an acc power in your Pacifica will be the power point down low, then hide it along pillar. I would doubt you will find anything above usable.

    • @mguerramd
      @mguerramd 3 роки тому

      @@kyleharden5260 ok thanks

  • @celticokie
    @celticokie 3 роки тому

    What is the unit mounted to? Is there a support above the headliner ?

    • @kyleharden5260
      @kyleharden5260  3 роки тому

      there is a support, I fabricate my own bracket

    • @celticokie
      @celticokie 3 роки тому

      @@kyleharden5260 Can you tell me how or what you used as a bracket, and how you secured it, thanks. Although, I am installing a 10" Rockville

    • @kyleharden5260
      @kyleharden5260  3 роки тому +1

      @@celticokie I make a bracket that pushes into place on the support, part of the bracket fits into the backside opening of the support the rest lies underneath the support and is fastened to the support. the steel support is a hardened material that is very difficult to drill into. best of luck!!

    • @hussainimca
      @hussainimca 2 роки тому

      @@kyleharden5260 do u have any pictures how it look like inside the headliner? could you plz provide more details.