Just had to thank you for the clear and helpful demonstration - I finished a cedar shingled, alternating overlap corner repair on my garage and other than operator error with a couple shingles not being level, it turned out great!
thank you for sharing the knowledge! so, i noticed you didn't wrap the vapor barrier behind the siding on the left or under the door trim. wouldn't water find its way through those seams?
TheWarrior831 I used the black roofing paper, which you can use to help keep costs down.
10 років тому
Thanks for the great video. We live in the Chicagoland area and just installed Cedar shingles from a local roofing company that was selling them ( www.abedward.com/cedar/ ) and it turned out great! We first watched this video to actually see the process of how they were installed. Thanks again!
wrong bar to begin with, they make a great bar that is 2 feet long , multiple teeth and is much flatter and its not pretty easy when you doing it off a roof ladder on a full dormer
Shop Our Amazon Store: amzn.to/39CM9ss
Just had to thank you for the clear and helpful demonstration - I finished a cedar shingled, alternating overlap corner repair on my garage and other than operator error with a couple shingles not being level, it turned out great!
Thanks for watching. Hope this video helped you out.
thank you for sharing the knowledge! so, i noticed you didn't wrap the vapor barrier behind the siding on the left or under the door trim. wouldn't water find its way through those seams?
TheWarrior831 I used the black roofing paper, which you can use to help keep costs down.
Thanks for the great video. We live in the Chicagoland area and just installed Cedar shingles from a local roofing company that was selling them ( www.abedward.com/cedar/ ) and it turned out great! We first watched this video to actually see the process of how they were installed. Thanks again!
If you have a large area to do, you're going to want to snap a chalk line to keep a straight line while laying the shakes down.
How do you remove siding shingles directly above a window?
Used a pry bar for the molding.
I need a pry baaaaar.
Thanks for watching.
I need a pry baaaahr.
Thanks for watching.
wrong bar to begin with, they make a great bar that is 2 feet long , multiple teeth and is much flatter
and its not pretty easy when you doing it off a roof ladder on a full dormer
If you don't have one of those this is a different way of doing it.
perhaps have another person hold the camera while you're demonstrating -- bouncing around away from the topic made me nauseous
Not sure but it is made for pellet stove pipe.