Japanese Excavator Factory | Yanmar Construction Equipment production in Japan
Вставка
- Опубліковано 11 бер 2022
- Excavator Factory | Yanmar Construction Equipment production in Japan.
Yanmar compact construction equipment gives you maximum performance in urban development projects.
Cities are cramped, complex spaces, so whichever way you look at it, you're going to need better quality equipment, equipment with better power,
better maneuverability, better fuel efficiency, better environmental credentials, and better durability.
It's the capabilities of our people and their hearts, tenaciously committed to developing and making better quality equipment that delivers that quality.
The number of parts required for a single machine is around 400. The parts required for each process are sorted into sets and supplied to each line.
Presswork turns steel plates into parts. Massive presses up to 1,000 tons and 3D lasers are used to fabricate all sorts of parts, from those weighing 130 kilograms, to ones small enough to fit in the palm of your hand. We utilize Yanmar Construction Equipment's proprietary pressing technology to form 1.6 millimeter steel plates into deep concave shapes, like that of a saucepan.
Welding thin steel plates from 2.3 to 4.5 millimeters thick. Generally, handling parts that require exterior quality, like covers, or parts that need to be airtight, like hydraulic fluid tanks.
Painting. Singlehandedly performing the entire process, from mixing and preparing the paint to finishing the fine details.
The task is to make the exterior of the machine - its “face” - look
as good as possible.100 to 170 parts per machine are sorted into three lines by drying temperature: high, normal, and low. Mixing paint for rustproofing and painting the fine areas that machines cannot handle is all done by hand. As a process that affects the exterior quality of the product, it requires a great deal of skill to cover the entire surface evenly with a coat only 0.06 mm thick.
Backhoe assembly.
Currently, there are 16 models in the backhoe product line. The specifications are different, for the countries where they will be used, and as requested by customers, so in fact there are over 200 different patterns. The assembly of all of these on a single line is one of the unique features of Yanmar Construction Equipment. Each process takes around 7 minutes, passing on the machine to the next process without any delays.
Loaders and carriers assembly.
Painted parts, purchased parts, and other parts are sorted into eight processes for assembly to complete the loaders and carriers. In order to improve our production efficiency, we introduced a conveyor line in 2016. There are fewer parts compared to backhoes, so while the number of employees is smaller, each member of this elite team plays a pivotal role with many responsibilities keeping them on their toes as they work.
0:02 welding
1:22 painting
2:41 assembly line - Авто та транспорт
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
I half expected Andrew Camarata to make a cameo welding up some stuff….😂
😂😂 you made my day. Camarata loves yanmar, so do i!
Ha Ha, dude right!?
Janpan IN. RI. Sopir Kowal. Kowad. Kowau. 90. Unit. Lewat Lst. Atg. Mico Tibah Pelabuhan Perak Pelabuhan Merak. Surabaya Semarang Manado Medan Kalimantan Utara Pantura Jember
THEY MAKE GREAT EQUIPMENT THE ENGINES LAST FOREVER
Yanmar made motors for komatsu and I can't get parts and no one will give me the the crossover numbers to yanmar. Fixing to be a boat anchor.
Ok the bes perodak japan ...disel ...terbaik /
The title is misleading. The video is a mix of manufacturing in Japan and elsewhere.
New subscribed from Somalia
I love you Japan
Thank you dear
Damn good machines!
ありがとうございます ❤
Yanmar products are of good quality
The paint will be better than jcb
素晴らしい仕事でした
very good
Yanmar top
Excellence work ❤
De esa fábrica de Japón salió la máquina que cambio mi vida ..
Mi yanmar vio 70 !!
Yo siempre pienso que trabajar está bien pero yo estube en esta marca y la estimo mucho pero yo el vendedor valoraba mucho la diversión por qué no el resto de la fábrica pensó como yo ??
Arigatho koncoku Friends..... 🇮🇩 🇮🇩🇮🇩Aishiteru.... Lurd...
I want one👍👍👍
Good luck without our steel 😂😂😂
How much are 13 ton machine prices?
Give me one mini-escalator
Rite baz naxim ..
Quá chất
Very very good☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺👍👍👍
Người Nhật giỏi thật
👍
Sore wa dorekurai shinmasu ka ?
Hello, I need spare parts for a yanmar mini excavator.
You gotta oder and pay they won't just fall in your lap
Need to make everything engines transmissions in the USA not just assemble!If we can do it with aerospace why not these.
Half of this footage isn't even from the Japan factory.
😮😮😮😮
can we get
Y y y
My from 🇮🇩
Столько дерма напихали🤦♂️
Hello
Hello friends... My from 🇮🇩
@@mobilalkidspetualang2041 hello
What you make which country are yo from
You expect too much if you want it made in the United States! Labor unions have killed manufacturing costs! Taxes have skyrocketed on big business in the United States as well 🙄! No cheap labor , no cheap manufacturing!
Look Deeper.Don't blame labour unions.Blame Corporate greed.Wages have stagnated,cost of living skyrocketed,Government beuracracy starting a business,legislative red tape.The price of a lot of goods has never came down,yet its manufactureded in cheap 3rd world countries,corporations are getting richer while the living wage is shrinking and jobs disappear.it's now about human exploitation,getting more and paying less.
They make these in Georgia., USA.
This is ASV in America!!! Stupid title
Whatsapp do you have?
Aku Ora Nana freids
Aku Ora Nana freids
Hello
Hy freids... I from 🇮🇩