I had same issue as many others. I followed instructions, exported from FontSquirrel as SVG file but it saved the font file needed in HTML (MicroSoftEdge in my case). Properties showed it as an .svg file but TinkerCad still would not accept it. I then renamed it with an .svg extension and it finally loaded! It appeared in the TinkerCad file picture box with two .svg extensions....nevertheless it worked!
Hi Jeff. Great video..thanks for the tips! I'm having an issue though and wondering if you know what I'm doing wrong? I've followed your instructions however I can't seem to get Font Squirrel to download as svg even though svg is the only thing one checked in Font Format. It downloads but gives me 2 html docs, a style sheet, a text doc and a folder with 2 more style sheets. I've tried 2 different fonts so far with same results. Any suggestions?
So one of your html files should be the .svg file mine comes up as a Firefox html document and a Microsoft edge html document. It the Microsoft document on mine thats the svg file. If your on windows right click on properties its should list as a svg.if not try to rename it.
Please explain how to get fonts from my font manager software into Tinkercad. Is it possible to directly load fonts from a font manager? or does the font file have to be converted to import SVG? How is that done? Once in Tinkercad, I want to make 3D font from my licenced $$$ font, then "place/export" the Tinkercad 3D version into vector software & continue with layout design.
Thank you for your time and effort. just wondering is there any way we can make led letter boxes ? I want to put some led strips back of these letter so that i can use it as glow sign.
I guess with zero infill and a printer that has good bridging. It could be done. Or print upside down and split the model so the bottom is printed and print the top half upside down with no infill and glue together after you install the leds. Probably need transparent filament.
you would probably design the lettering with a void inside it. Create the word you want then rotate the lettering face down, then duplicate the word. Take the dup and adjust dimensions until it is smaller by enough that it will fit well into/inside the existing solid lettering, change the dup to a hole instead of a solid. Align both using the alignment tool, then sit the hole version inside the solid version and group to cut out the letting on the inside. Make sure your hole version is slightly taller than the solid lettering and sticks out so it completely cuts out the back of the solid lettering.
hey, ty alot for vid, do u know if tinkercad webpage is having issues with that? i cant make it work svg fonts, i used it 4 days ago, but now its not working anymore
word for the wise get rid of avg antivirus its the worst one you could ever have .. look at you task manger and see how much ram and cpu it uses in the background
I am from Rhode Island and this video helped me very very much... Thank you
I'm new to 3d printing. And this helped me a lot.
Big Thanks I’ve been wanting to find out how to do this forever
I had same issue as many others. I followed instructions, exported from FontSquirrel as SVG file but it saved the font file needed in HTML (MicroSoftEdge in my case). Properties showed it as an .svg file but TinkerCad still would not accept it. I then renamed it with an .svg extension and it finally loaded! It appeared in the TinkerCad file picture box with two .svg extensions....nevertheless it worked!
life saver
Sending a big thank you for this video😊
I'm from Brazil and your video helped me a lot, thank you very much
thanks for sharing! super helpful!
Thank you fella, actually bloomin works!
This was extremely helpful! BIG THANK YOU
Jeff and Janet... how does that always happen. Couples with alliterative names, lol.
Yea I know this video is a tad old, however
This helped me SOO much!
Great vid
Thanks! That is amazing!
superb thanks
This helped me a lot. But the thing I had trouble on before watching the video was the file ripe because tinkercad allows 3 tapes of files
thanks a lot 👍👍..
Hi Jeff. Great video..thanks for the tips! I'm having an issue though and wondering if you know what I'm doing wrong? I've followed your instructions however I can't seem to get Font Squirrel to download as svg even though svg is the only thing one checked in Font Format. It downloads but gives me 2 html docs, a style sheet, a text doc and a folder with 2 more style sheets. I've tried 2 different fonts so far with same results. Any suggestions?
Hi Candice, did you find out how to fix that issue, as i am having the same problem
@@charleneamber8738 unfortunately no
So one of your html files should be the .svg file mine comes up as a Firefox html document and a Microsoft edge html document. It the Microsoft document on mine thats the svg file. If your on windows right click on properties its should list as a svg.if not try to rename it.
Did you select 'Expert' and select 'SVG'? That was the step I first missed?
@@jeffs3dcorner I still lose as to get the svg file when I right click i dont get properties ?
The video is great, but once i download it from Font Squirell i dont seem to have the svg file. What could i be doing wrong?
Please explain how to get fonts from my font manager software into Tinkercad. Is it possible to directly load fonts from a font manager? or does the font file have to be converted to import SVG? How is that done? Once in Tinkercad, I want to make 3D font from my licenced $$$ font, then "place/export" the Tinkercad 3D version into vector software & continue with layout design.
You can use a different software to write the name, then close the letters together then import as svg
Hi, awesome video! Is there a way to create an inlay for those letters?
Thank you for your time and effort. just wondering is there any way we can make led letter boxes ? I want to put some led strips back of these letter so that i can use it as glow sign.
I guess with zero infill and a printer that has good bridging. It could be done. Or print upside down and split the model so the bottom is printed and print the top half upside down with no infill and glue together after you install the leds. Probably need transparent filament.
you would probably design the lettering with a void inside it. Create the word you want then rotate the lettering face down, then duplicate the word. Take the dup and adjust dimensions until it is smaller by enough that it will fit well into/inside the existing solid lettering, change the dup to a hole instead of a solid. Align both using the alignment tool, then sit the hole version inside the solid version and group to cut out the letting on the inside. Make sure your hole version is slightly taller than the solid lettering and sticks out so it completely cuts out the back of the solid lettering.
its very nice thx
Hi there, my tinkercad drop down menu doesn't look the same... I'm not sure why I'm not able to do this.
thank you so much
hey, ty alot for vid, do u know if tinkercad webpage is having issues with that? i cant make it work svg fonts, i used it 4 days ago, but now its not working anymore
let the beardie roam for a few hours... he will likely find your cricket...lol
my issue is my SVG font file is over 400kb =(
This is not working for me. idk what i'm doing wrong. Nothing comes up for it to be a svg file.
would love to see a video about the Disney font and how did you get the letters close to each other.
❤️🦗
word for the wise get rid of avg antivirus its the worst one you could ever have .. look at you task manger and see how much ram and cpu it uses in the background
I keep trying to maximize your screeb
i have
The volume on your video is WAY too low. I had to set my speakers all the way to the highest setting and still had trouble hearing the video.
Could barely hear you...
Sorry my audio is better in newer videos