Відео

Can your printer make it interior hollow and still keep the exterior body strong?

cool man. great walkthrough. thanks.

My Tronxy XY2-pro won't Z off and keeps turning off and on . What is the fix

Thanks a lot. Great video

Why is it blue and black, where'd the 3 colors go?

how much time does it takes to print the head ?

Dude, you are a Life Saver! Thank you!

Good afternoon Jeff wanted to ask you a couple of questions can u get back to me regarding the 3d printing thank you

👍👍👍 this was supper helpful, thanks for sharing.

Hi jeff, i instal the BL Touch in mi Tronxy but the screen no on, plis help. Sorry for my english.

This is a lie there is nothing for the v10 motherboard this video needs to be removed

my issue is my SVG font file is over 400kb =(

Thank you so much!! I was unsure of how to choose the settings and how to interpret the result after.

Danke. Durch dein Video habe ich es geschafft meine Kamera zum laufen zu bringen. Sehr schön erklärt. Vielen Dank

Can't compile anything out of the F4xx-SIM480x320-firmware from the tronxy git hub, only getting errors. I've compiled a firmware based on the " TheThomasD Marlin-2.1.x-tronxy-x5sa-400 " and changed some code for the X5SA , but cant flash it , Printer ignores the .Ctb file. Tried connecting via STM32CubeProgrammer , but it wouldn't connect ( believe that the Cxy-446-v10-220413 Board doesn't have the boot jumper like other similar boards ) Starting to accept the idea that the original tronxy X5SA board can't be used for anything ( And I have two here) Should I trash them? I can't tolerate the original firmware

The N32 doesn't work with Alex's firmware and a BL Touch unfortunately. The second the probe hits the bed, the temp readings for both the bed and the extruder hit 0, which causes a "Kill printer reason - MINTEMP" error if you're printing. I would just make it so it doesn't even level the bed, but the BL Touch is now my Z axis sensor, regardless if acting as a bed leveler or a sensor.

Outstanding video. Watching this helped me solve my problem that I was having. Thank you.

Great pal, u gave ma great idea then; what if I switch from black to transparent, and then different shades of tranparent colors? And what if I move it to Sketchup or else and do a real 3D piece, look

I've done a very similar routine for my setup -except, I place a very small peg in each outermost corner of the build plate (if it's shorter than your first layer height, the slicer will likely not include them in the gcode - even if they do print, they're extremely tiny and easy to remove between prints). I then grouped all 4 pegs with the inset. I did all components the same way. That way, once I imported them into the slicer, all I had to do was center them. It saved me from having to go through the entire alignment process you shared here. - My way is completely separate prints per color too, though (make sure you keep the bed from cooling down between prints). This means you can do it on absolutely any FDM printer.

Geez, I can't concentrate on your video with that smoke decorator going off.

How do you make it rehome after swapping the filament? I can never get the old one out and the new one in without moving the x-axis.

Tried to download the files but it will not work the url file isn’t showing up. Can you please help?

There are some serious problems with STEP 3 ... It might perfectly work for single motor Z-axis, but how should I manually synchronously lift the bed when having the dual motor Z-axis? TronXY X5SA 500 Pro with Chitu FW.

Hi Jeff, thank you for sharing your knowledge with us. Much appreciated. I have the Anycubic kobra max and have had a bunch of small issues that prevent me from completing the project I got into 3D printing. One of them is the stringing I face with PETG. I ran this test and like the others cited, it does not get to a nice smooth line like you show in your print. On the heavy side it is like a protruding wall and on the best side it has the long curved upward strings. We don't get that nice flat side like you show. I'm sure we need to make an adjustment in the setting but what one and what direction?

Hi, will netfabb automatically repair it?

Yesterday I was afraid I had to buy a new board, one video later and my XY2pro is moving again. I wasn't aware I needed to flash a bootloader before the firmware, I somehow deleted that. Thank you so much and enjoy the coffee.

Thank you, Sir. I don't know what I would have done without you! Granted my SD card reader was messed, which i ended up fixing and now I am a pro at firmware flashing! Thank you for getting it out there. I have XY3SE 2E. If you have any suggestions on upgrades or firmware and where you have ended up now, please let me know! Thank you.

Thank you jeff, you are a godsend!

I am still a little confused, won't the print head have problems with 3 colours on the same layer?

Bed does not have to be level, it has to be parallel with the back and forth movement of the print head. There has to be a consistent distance from the bed to the nozzle. If bo the the travel and the bed are ad 45degrees, it would print fine. Level is just the convenient word we use, it is a single word as opposed to the multi-word description of what you are doing, but parallel would be a better description of what you are doing. But, other than this minor symantics, the concept is absolutely vital and you are 100% correct. And a very good video, I wouldn't change anything, Level is the right word, although not strictly correct.

Halllo, tou have original firmware kingron kp5 v1

Hey Jeff, awesome work! I’m inclined to try something similar with my tronxy crux 1, don’t know what to expect but I think your videos are going to help in my journey :)

wow. all this time suffering with this printer. gone. thanks so much. perfect prints every time now. great video.

Dude, change your smoke alarm battery. 🤣

Ive tried printing this thing 4 times and it just wont adhere to my bed. Prints anything else fine, minus the stringing issues, but the first line it tries to print just wont stick. Any ideas?

would love to see a video about the Disney font and how did you get the letters close to each other.

there is no legacy camera option in my updated pi os, in raspi config using command line , interfacing options, no camera mention anywhere, os was installed in March 2024 so is not old

I've been having problems with my XY 2 pro and went down a rabbit hole trying to fix it. I was getting the prints skipping position on the bed fore and aft like it was loosing the Y position of the motor and I was getting the blower shroud chewed up exactly like @7:45 in this video. I worked out that the problem was the offset adjustment nut on the underside of the print bed (which I had completely forgotten about) was no longer correctly tensioned, allowing the print head to sag down only a millimetre or two and that was enough to catch the blower shroud on the print job and causing the belt to jump teeth and loose the y axis position as well as completely mangle the blower shroud.

3 weeks with problems. I ordered new BI metal V6 heatbreak and the tips are awesome. THX!!!!

The board on this printer burn very fast, and this is the 2nd time replacement, so the board is expensive as I have to pay 70GBP each time

Thanks. Do you have the block diagrams for the motherboard so I can repair the motherboard's hardware? When I turn on the printer, start heating the hot end and only stop when it reaches a maximum of 275. The thermostat is able to keep reading, so the failure is with the relay swish. So, do you have information about the diagram so I can find out when this switch is so I can change it, or any other advice?

It does what you need to do, I’m pretty happy with it, it don’t know why usb in the isn’t working. The usb in the back is useful for the vacuum pump to suck air from my filament bags.

does this work with tronxy crux 1?

Was getting serious slicer issues until watching your video. Big thank you dude! I'll have more hair thanks to you 👍

Good functional print Jeff

Such bad build quality on mine. Screen peeling away. Horrible interface and even worse app.

didn't work on mine! just ignored it! fixed it with a new board and probe and firmware! (cost $100.) software doesn't work either.

Thank you for this! Only tutorial that got my pi cam working!

Hi Jeff, thanks for your videos. Please answer the question why the .cdb disappeared in VS code. And is it possible to fix it?

Thank you very much for the excellent class. He saved my life twice! A big hug from Brazil.