2003 Ninja 500r Restoration
Вставка
- Опубліковано 1 січ 2025
- I bought a 2003 Kawasaki Ninja 500r for $360 and got it back on the street. Total cost was as follows:
360 Bike
212.37 Title,registration
76.76 insurance for a year
86.50 Brake/clutch lever, air filter, ignition coils, brake pads, carburetor rebuild kit
120.80 Spark plug wrench, carb cleaner,battery
13.63 Grease
10.71 spark plugs
12.79 Fuses, o-rings,magnet pan
47.00 coolant, gloves, feeler gauge
43.42 oil, oil filter
21.66 plastic welder kit
8.95 screwdriver
12.03 hose, clamps, brake fluid
35.22 speedo cable
28.47 paint
26.19 paint, sander
24.64 air filter oil
Problems:
Carbs need rebuild
Front fairing missing
Upper fairing destroyed
Front fork leaks
Broken Coil
Bad oil
Bad coolant
Bad air filter
Old tires
Old chain
Windshield fogged
Dry rot hoses
Front rotor worn
Needs brake pads
Gas cap leak
Sticky/reversed throttle
Missing hoses
Bent left handlebar
Missing fuses
Valve clearance
Front brake wont work
Clutch lever bent
Evap system missing
Got an 02 ninja I worked on for 2 years running now it’s a process but worth the struggle and learning experience good job man
What handle bars are compatibal with this bike
How did u fix the handlebars mine is bent on the right side I don’t wanna break it lol
@@weskaufman9173 i bent it back but theyre not made super well so they ended up snapping. Had to buy new bars on ebay
@@RuckProductions35 okay good to know I’ll just get new ones
@@RuckProductions35 it's the left thats bent in the video? is that after or before you bent it back? Mine is bent worse like 15 degrees, it won't survive bending back?
@@womplestilskin even if it does bend back it may snap with no warning while you're riding, that's about what happened to mine. Your life depends on that lever not malfunctioning while riding, I recommend just buying a new one if yours is bent
@@RuckProductions35 Thanks, you're 100% for this, and replying on comments. I do wish you expanded this video, but it's also nice and concise.
Where'd you order the parts from?
Most parts can be found on ebay, but some of them are oem and others are extremely cheap Chinese parts so buyer beware. I ended up not using some parts i ordered like the carb rebuild kits that arent oem are basically trash for the most part.
@@RuckProductions35 thanks for the information...