VW Golf 7 rear bumper removal and parking sensor replacement - Tutorial

Quick, simple and detailed instruction on how to remove the rear bumper and replace the parking sensors at the VW Golf 7.
difficulty: easy
estimated time: 30mins
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
This channel uses affiliate links. As an Amazon Associate, I earn from qualifying sales by using these links. There are no additional costs for you.
53-Piece 1/4" Socket Set amzn.to/3nmbJh5
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
VW Golf 7 door panel removal: • VW Golf 7 door panel r...
VW Golf 7 Side mirror removal: • VW Golf 7 removing sid...
VW Golf 7 headlight removal: • VW Golf 7 remove and i...
VW Golf 7 headlight bulb replacement: • VW Golf 7 headlight bu...
VW Golf 7 front bumper removal: • VW Golf 7 front bumper...
Golf 7 Tutorials: • VW Golf 7
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Musik:www.frametraxx.de/info/gemafr... Point of View von Frametraxx
www.frametraxx.de/info/gemafr... Bless me von Frametraxx

[@cjp57]

Excellent. I particularly like your method of putting still shots with graphics followed by you demonstrating exactly what to do. It works well. Cheers

[@i-car-us]

Thanks a lot! I am trying my best to explain it as simple and fast as possible.

[@carlmason4153]

Excellent video my friend, very professional, thanks so much 👍

[@i-car-us]

Thank you, sir 🫡 trying my best

[@johnblanning2500]

Very good. Please show the clips at the top of the bumper, your arm was in the way! I like the way the video was made.

[@ScratchingiCARus]

At what point? Min

[@DannyKorff]

Very good. Thank you very much my friend.

[@juanmi646]

Thanks for sharing, a very usefull video.

[@sebastianpedersenskar9227]

Thank you for making this video!

[@i-car-us]

My pleasure

[@grahamgarnett8338]

Brilliant, well edited and shot video. Cheers.

[@i-car-us]

Thank you, sir🫡

[@1inyong]

You are my Hero! thx!

[@kklkhs]

Thank you so much!

[@harryberry474]

Very good pictures and video looKs pretty easy, only thing I'd do differently would have been the use of nylon/plastic tools instead of metal screwdriver to prevent scratching paint or breaking electrical connectors.

[@roysam2710]

Thank you for sharing. Top

[@i-car-us]

👍

[@aslamsabat1684]

brilliant nate
thanks pal

[@i-car-us]

Thx

[@fmoyasoulat]

Excelente explicación 😎👌🏼👌🏼👌🏼

[@i-car-us]

Thank you sir🫡, and thank you for the subscription. I appreciate that🫶

[@nigelevans1215]

Wow what a flaf looks quite easy to damage stuff

[@nichanpress8586]

tu peut maide je. veux acheter cette parchoc

[@ThePandeo]

Hi, any advice on the plastic rivets. The two middle screws rounded off straight away and won't turn 😢

[@i-car-us]

Lever them out. If the brake, get new ones

[@98watt]

How do you remove the reflectors and put them on a new bumper? I am replacing a damaged bumper cover with new.

[@i-car-us]

Press the hooks in the inside together a bit and take it out

[@SteveHiemstraAKAspeg]

Are these the same as the blind spot sensors? When replacing them, do they need any calibration? If so, can you DIY?

[@i-car-us]

No, parking sensors aren't blind spot sensors.
No calibration is necessary when replacing the parking sensors

[@someone-gb2ec]

Omg german over enginering😂

[@harryberry474]

@someone-gb2ec...Tell that to the people that have water damage because of inferior or lack of proper seals and sunroof leaks due to poorly designed drains. Sunroof leaks, Door Speaker leaks, Rear hatch latch drain tube breakage leaks, Rear Side Vents @4:53 (you can see them) leaks they're big rectangular objects behind the bumper cover plastic frame with no seal. If you take of rear bumper you'll want to take them out clean the area & vents and reinstall with silicone sealer around the frames and inspect for standing water there's a rubber plug behind the vents where you can drain the water out (if there is any) this is very common source of water intrusion also inspect tail light seals while you have them out.
Over Engineered? I think Not