Donald Byrd it’s a great tool and affordable 👍🏼! Hopefully the new E-words working at horizon hobbies nowadays don’t discontinue this shit just like the 086 pipe and the dynamite 5th work stand and other things I can go on and on ! We need more people to e-mail the shit out of them and request the good shit back!
on the clutch shoe bolts I use a little anti seize on the bolts it will not sling off plus the copper or silver compound in it will stop the rusting but that's me nice job on the 5th scale keep it up I always enjoy watching your videos....nitro gas forever
shiner-RC exactly that’s good to and I have used Anti-seize as well in the past for this. It may even be in my past videos. This brake grease I used is very similar and same purpose
Kevin’s RCAddiction513 I’m very happy to hear that but just remember that you have many Gas ⛽️ brothers out there and you definitely have me if you ever get stuck with anything or have any questions? I will do my best to help out .
SCOPOD!!!! BRAHHHRR!))))) The clutch adapter was not removed. But I realized that the DDM crankshaft Zenoach 62ss sharpened, TC is short. And the clutch is installed in the standard way. Ps. Unscrew the drain valve. Interested in what his carving.
Richard Liu yes that’s true but thank goodness for King 👑 Motors and Rovan and even Primal RC because there prices on some of there stuff is even more cheaper then 1/8 scales and that will help out many young newbies out or a guy that’s a wrencher and just wants to build something there own and spend the rest of the money they saved on a sick ass Gas ⛽️ Engine! You can get or start out in the 5th scale hobby with a Baja between the $300 and $400 dollar range. You can also get a Roller version for cheap and install what ever engine you like and electronics .
Nitro Wave if it’s a Nitro set up ? Please do not leave any nitro in the tank at all ever, only when running the engine is when there should be fuel in the tank!! With Gas it’s all about what fuel your running!! Fuel can stay in the tank much longer then a Nitro but like I said it’s all about what fuel your running. I run Ethanol free CAM-2 💯 octane so that fuel or any fuel that’s Ethanol free gas/petrol is best to use because you’re fuel lines and diaphragms in the carburetor will not harden up so you stay running and start up easily as well . Almost all the fuel in the USA at the gas stations today are using 10 and 15% ethanol in the fuel. This new blend of fuel will go bad within 30 days and sometimes even under that. It will also eat away at anything that’s rubber. Even when I use cam-2 mixed with Amsoil Dominator oil I won’t let fuel sit in my fuel tank more then a week that’s just because I’m crazy like that . It’s so easy for me to take out any fuel from the tank with a Nitro fill bottle. Hope that answers your questions
BOTAJELL Thanks So much bro.. that information really did, answered everything..🖒🙌🏽 Would you also recommend me buying the.. Star Tron Enzyme Fuel Treatment? I think iv seen you use it in your past videos.
Nice build brother..👌🏽 I need your help bro...I just ordered a ROVAN 5T after watching a lot of your videos and I would like to know what type of batteries can I use for the receiver? 2s lipo maybe? Thank you brother.!!
Jorge Figueroa bro F that lipo crap! Why do you want to risk having your Rc or house go up in 🔥 Fire god forbid ?? Bro get a 2 S LiFe 4,200 vamp power battery or the 2S 4,100 LiFe Dynamite battery. You can use those. Get the dynamite before there all gone and hard to get or get the Vamp battery?
Go to the dollar store and buy this cleaner called .. "Awesome" it cleans oil and grease great ( it will clean oil from your blue jeans) and only cost 1.00 then clean it with "Acetone" .
Jhon I own an xmaxx and a couple losi cars a losi ten scbe and a losi baja rey Im only 13 but I love working on rcs I do it every dat after school Im thinking one day going to gas but not yet love your vids Ik im a e word but Ik how to wrench🔧 anyways keep on wrenching and making videos💪👍🏻🔧
RC tuner nice 👍🏼 bro!! I like how you are already! Your going to make a fine RC mechanic that runs RCs with real breathing engine one day I can feel it!! Please let me know one day when your ready or if you ever have any questions? Because I would love to have another Gas ⛽️/ Braaaaap Brother like yourself on our side!! Until then keep up the great work that you are already doing!!
Botajell! TGN sells a velocity stack similar to the one that was discontinued by DDM! Check it out! It has the back lip that you like. I prefer the inclined shread stack😎 it has a cone on the plenum that I feel would help keep anything from getting sucked into the motor should any debris get in between the filter and velocity stack. I could be wrong though but I like them anyway lol
That's from the same supplier that DDM was getting them from they don't make them anymore which sucks so I make my own from DDM's AF310. DDM bought all the guys stock be had left. Hopefully someone will start production on them again
Dang I'm late :( as I've said many times before this truck is gunna be killer!!!! 👍👍 this vid is what i need to end off a good day!!! Im wondering Is it possible you could measure the size of the reed block on the scz??🍻🍻
Karrie Bhurgari seems to be 1 1/2 by 1 1/2. Let me know you need me to remove the reed tomorrow? My fat ass is in bed now. Got to be at work early tomorrow
BOTAJELL is that the plate that mounts the intake manifold?? Because I want the inner size that the reed fits in from inner wall to inner wall not the outer wall
I have a 70 Maverick that does the 1/8 at 98.2 mph A bit of a good toy and actually came from a little old lady for 150 dollars 20 years ago. A bit of billet and what Im talking about would work with no hp limit.
caged lion I have not driven my RCMAX yet but I have friends that have them and RCMAX is just different!!! SkoPod is good once you get them started and there a work horse . It will and can run all day!!! They should make a generator with that engine lol 😂. I wish that I could use a different carburetor on mine to help it a bit but they don’t fit and I may use a FID Pull Start to help my Hand 🤚 Out because there a bitch to start sometimes. But I love my SkoPod. Trevor Simpson used to have some bad ass head kits and intake and exhaust manifolds some time ago and I wish I had them so I can truly compare the performance to my RCMAX engines or my SF engines. My SkoPod 62is Bone Stock Zen engine unlike my RCMAX and others I have
Great job John very good info for all us gas/nitro heads keep it up 👌💪
YOU have taught me some good shit. I never knew DYN had a clutch tool. With these mitts of mine I've cracked a piston.
Donald Byrd it’s a great tool and affordable 👍🏼! Hopefully the new E-words working at horizon hobbies nowadays don’t discontinue this shit just like the 086 pipe and the dynamite 5th work stand and other things I can go on and on ! We need more people to e-mail the shit out of them and request the good shit back!
Forgot about the bell, now I have reason to tear down all. It pays to watch every min. Thanks
Nice job thank you 4 sharing
I love seeing your subscribers count go up you truly deserve it every video you put out I learn something new keep it going great job
Ernie S thank you brother!!
Lots of great information here! Keep it up Bro!!
on the clutch shoe bolts I use a little anti seize on the bolts it will not sling off plus the copper or silver compound in it will stop the rusting but that's me nice job on the 5th scale keep it up I always enjoy watching your videos....nitro gas forever
shiner-RC exactly that’s good to and I have used Anti-seize as well in the past for this. It may even be in my past videos. This brake grease I used is very similar and same purpose
In door race night!!! bumped can't wait, but she will be COLD!!! No heat and doors opened.
Ron Marsh good luck to you brother
over 1000 subscribers in a week! your at 5314 subs man your blowing up big time! great job!
the only thing beter than working on my 1/5 scale is watching you work on yours
you do this like a boss my friend! nice tutorial!
My big homie BOTAJELL! ! ! 👍👊👊
HillbillyNitro USA sup bro hope all is well!
Wow bro looking good. I'm actually learning some new stuff here. Can't wait to here that engine ripping.
Looking nice bro. Can’t wait for Li bash
I can’t wait to see this beauty running
Kevin’s RCAddiction513 thanks Kev!
No problem brother thank you for sharing ur knowledge because I may have gave up on my fifth scale if it wasn’t for ur channel
Kevin’s RCAddiction513 I’m very happy to hear that but just remember that you have many Gas ⛽️ brothers out there and you definitely have me if you ever get stuck with anything or have any questions? I will do my best to help out .
I saw you at that show and seen what you felt. Do it man. You have and got it.
SCOPOD!!!! BRAHHHRR!)))))
The clutch adapter was not removed. But I realized that the DDM crankshaft Zenoach 62ss sharpened, TC is short. And the clutch is installed in the standard way.
Ps. Unscrew the drain valve. Interested in what his carving.
Feels like 5th scale rc car is the most expensive one in the entire rc car hobby
Richard Liu yes that’s true but thank goodness for King 👑 Motors and Rovan and even Primal RC because there prices on some of there stuff is even more cheaper then 1/8 scales and that will help out many young newbies out or a guy that’s a wrencher and just wants to build something there own and spend the rest of the money they saved on a sick ass Gas ⛽️ Engine! You can get or start out in the 5th scale hobby with a Baja between the $300 and $400 dollar range. You can also get a Roller version for cheap and install what ever engine you like and electronics .
Looks good , gettin close to the finish line . Lol
J C yes sir
My g340 is going on the 5t this weekend john. Thats if my clutch comes in. Im excited got my dynamite kill switch in today as well! #brapsallday
stacey weaver nice 👍🏼 bro!! I can’t wait to see and hear it! I’m excited for you brother!
Thanks bro im excited i will forsure try to make a video of breaking it in.
Got a lil vid of john
Ment lil vid up lol
Heyyyy big boss I miss more or yuor wrenching 🛠🛠🛠🏎💥💥💥🇵🇹🇵🇹🇵🇹🇺🇸🇺🇸🇵🇷🇵🇷
If time is there id go with engine of chioce, front end of choice, your own frame and rear straight axle with a chain. Chains work well on gsxr s.
I had a picco 26 max on a t maxx years ago. Was awesome.
Looking good man
Whitto’s Rc thank you
NiCe Beast Right There⛽
Quick random question bro, how long should fuel be left in the gas tank?.. before it should be replaced/Taken Out?
Nitro Wave if it’s a Nitro set up ? Please do not leave any nitro in the tank at all ever, only when running the engine is when there should be fuel in the tank!! With Gas it’s all about what fuel your running!! Fuel can stay in the tank much longer then a Nitro but like I said it’s all about what fuel your running. I run Ethanol free CAM-2 💯 octane so that fuel or any fuel that’s Ethanol free gas/petrol is best to use because you’re fuel lines and diaphragms in the carburetor will not harden up so you stay running and start up easily as well . Almost all the fuel in the USA at the gas stations today are using 10 and 15% ethanol in the fuel. This new blend of fuel will go bad within 30 days and sometimes even under that. It will also eat away at anything that’s rubber. Even when I use cam-2 mixed with Amsoil Dominator oil I won’t let fuel sit in my fuel tank more then a week that’s just because I’m crazy like that . It’s so easy for me to take out any fuel from the tank with a Nitro fill bottle. Hope that answers your questions
BOTAJELL
Thanks So much bro.. that information really did, answered everything..🖒🙌🏽
Would you also recommend me buying the.. Star Tron Enzyme Fuel Treatment?
I think iv seen you use it in your past videos.
Can't wait to hear and see this monster rip
👍👍👍👍
that engine is a tourqe monster big john
Dana Checrallah yes she is !!
oh yea bro you are gonna be able to pull four 8s x-maxx around like nothing i know how they run on mopeds
I literally love your vids! I've got 1 nitro car but will be having another 1 soon. can i join the engine brothers!???
N-E-RC hell yes !! Your already my NITRO Bro so no worries lol 😆!! Listen if you ever need any help or questions? Just let me know
Thanks!!I have 1 question. I can turn the flywheel both ways, is that normal? I don't have pulstart btw. Thanks!!
N-E-RC sure you can go back and forth with the flywheel why do you ask?
Nice build brother..👌🏽
I need your help bro...I just ordered a ROVAN 5T after watching a lot of your videos and I would like to know what type of batteries can I use for the receiver?
2s lipo maybe?
Thank you brother.!!
Jorge Figueroa bro F that lipo crap! Why do you want to risk having your Rc or house go up in 🔥 Fire god forbid ?? Bro get a 2 S LiFe 4,200 vamp power battery or the 2S 4,100 LiFe Dynamite battery. You can use those. Get the dynamite before there all gone and hard to get or get the Vamp battery?
BOTAJELL sounds good bro I will do that...thanks for replying..God bless you brother..👍👊
Go to the dollar store and buy this cleaner called .. "Awesome" it cleans oil and grease great ( it will clean oil from your blue jeans) and only cost 1.00 then clean it with "Acetone" .
What type of loc tite you use, ready to buy some!!
vincent berry anything Blue sometimes Permatex and sometimes Loctite
Jhon I own an xmaxx and a couple losi cars a losi ten scbe and a losi baja rey Im only 13 but I love working on rcs I do it every dat after school Im thinking one day going to gas but not yet love your vids Ik im a e word but Ik how to wrench🔧 anyways keep on wrenching and making videos💪👍🏻🔧
RC tuner nice 👍🏼 bro!! I like how you are already! Your going to make a fine RC mechanic that runs RCs with real breathing engine one day I can feel it!! Please let me know one day when your ready or if you ever have any questions? Because I would love to have another Gas ⛽️/ Braaaaap Brother like yourself on our side!! Until then keep up the great work that you are already doing!!
BOTAJELL thx bro I will do👍🏻
Botajell! TGN sells a velocity stack similar to the one that was discontinued by DDM! Check it out! It has the back lip that you like. I prefer the inclined shread stack😎 it has a cone on the plenum that I feel would help keep anything from getting sucked into the motor should any debris get in between the filter and velocity stack. I could be wrong though but I like them anyway lol
Alien Bounce that would be cool bro and great news if they are the same. Can you please send me a link here
Its out of stock i called them a month ago they said they will be making more but havent seen any yet! www.tgndistributing.com/velocity-stack.html
That's from the same supplier that DDM was getting them from they don't make them anymore which sucks so I make my own from DDM's AF310. DDM bought all the guys stock be had left. Hopefully someone will start production on them again
MGP CUSTOMS what a shame!! What’s up my good buddy? Maybe you are your friend can start fabricating them ???
BOTAJELL my bad on getting hopes up! I was just scrolling the website and saw it
Is the high HP Door slammer build soon.
WeberBuilt Weber lol maybe?
Im learning ya
💥⛽🔥😍
Only 5th scale 👍🏼👊🍻🍻
BOTAJELL 🍻🍺good idea
Only 5th scale lol
Dang I'm late :( as I've said many times before this truck is gunna be killer!!!! 👍👍 this vid is what i need to end off a good day!!! Im wondering Is it possible you could measure the size of the reed block on the scz??🍻🍻
Karrie Bhurgari sure brother but what do you mean? Just the reed or the width of the crankcase from one end to the other where the reed is?
BOTAJELL I want the inner square that the reed fits in. I want the length and width thanks bro!!
Karrie Bhurgari seems to be 1 1/2 by 1 1/2. Let me know you need me to remove the reed tomorrow? My fat ass is in bed now. Got to be at work early tomorrow
BOTAJELL is that the plate that mounts the intake manifold?? Because I want the inner size that the reed fits in from inner wall to inner wall not the outer wall
Karrie Bhurgari the outer is almost 1 3/4
Need a bumper for my 30.5 cc king motor 1/5 scale whats the best one to get and we’re from
What kind of king motor RC you got? What model/ What Platform?
I have a 70 Maverick that does the 1/8 at 98.2 mph A bit of a good toy and actually came from a little old lady for 150 dollars 20 years ago. A bit of billet and what Im talking about would work with no hp limit.
How does the sko pod compare to your rc max
caged lion I have not driven my RCMAX yet but I have friends that have them and RCMAX is just different!!! SkoPod is good once you get them started and there a work horse . It will and can run all day!!! They should make a generator with that engine lol 😂. I wish that I could use a different carburetor on mine to help it a bit but they don’t fit and I may use a FID Pull Start to help my Hand 🤚 Out because there a bitch to start sometimes. But I love my SkoPod. Trevor Simpson used to have some bad ass head kits and intake and exhaust manifolds some time ago and I wish I had them so I can truly compare the performance to my RCMAX engines or my SF engines. My SkoPod 62is Bone Stock Zen engine unlike my RCMAX and others I have
My friend even uses a stock Zen SkoPod 62 in his big ass RC AirPlane ✈️ and he told me it’s his most reliable engine
First
I just tried to order the clutch tool itts disc any other suggestions
And the work I have seen you do blows most to the side.
or a vintage funny car
WeberBuilt Weber now that’s bad ass!!!
with a jackshaft the engine can be centered and have an ultra narrow rear axle. jr dragsters us a chain
Im just A butterball truck driver with wishes.
What espresso machine do you have
Bryan Miranda DELTA
Gary McLoughlin that’s it that’s what keeps me going No joke!! Zeeeeeaah coffee ☕️! I’m having one right now as we speak Any ?’s lol 😝
And glass molds of anything is basic but bit of work. been there.
Hi
4th