Brushless Mario Kart Top Speed Driving Carrera RC. Crazy Fast!
Вставка
- Опубліковано 25 тра 2020
- So here is the first top speed driving with my Mario Kart.
I have bought it directly from Carrera RC homepage.
Here is a link to their homepage carrera-toys.com for purchasing Mario Kart:
carrera-toys.com/en/product/3...
I have upgrade this toy to brushless system and also done some other modifications such as ball bearings in the rear axle and air intakes for cooling the ESC and also put air intakes back in the rear seat for cooling the motor.
I have also a custom made throttle and brake pedal made of 3mm carbon fiber and aluminum pipe for my Mario.
This job took about 1 month to complete and I am very satisfied and proud with the result :).
The original top speed is about 12-13 km/h or 7-8 mph with 7.4V battery.
If you have any questions, put a comment down below.
So enjoy and thanks for watching!
Big thanks to my friend Thomas who filmed this video ;).
My equipment for this run -
Motor: Quickrun 2435 4500kv
ESC: EZRUN Max10 60A
Battery: VP Lipo 1000mha 11.1 volt 3S
Servo: Savöx SW-0250MG mini 5kg/0.11sec
Radio: Sanwa M12S - Авто та транспорт
I would really love to make this build. Could you make a how to list of parts and the method used?
If you can give me your email, I can try and send pictures of the build. I use the hobbywing ezrun max 10 esc, A smaller savöx servo SW-0250MG and hobbywing quickrun motor 2435 4500 kv.
Hi mate I have the bowser one for these karts. What do I need to do this?
Hi friend.
This is the equipment inside the cart, hobbywing ezrun max 10 esc, A smaller savöx servo SW-0250MG and hobbywing quickrun motor 2435 4500 kv.
You have to cut away much plastic material to give room for the esc and esc cables. I even had to solder the esc cables in a down angle position on the contacts on the esc to save room to get the top lid on. If you can use a smaller esc maybe you dont have to cut as much. It is very narrow room for the esc and cables. The reciever, servo and motor was easy to make it work. Hope this info helps, otherwise write back to me. If I could email you pictures of the build?
What pinion gear did you use, thanks
Hi Lawrence. I use the original pinion gear.
Thanks for watching 😃.
Do you Know how to open the controller ?
You mean the original controller? In that case yes. First you loosen the screw that holds the battery cover in place, then you have to use a smaller flat screw driver on those small black edges under the controller, 2 in the front, 2 in the back. Use the screw driver and bend a little, the 2 in front you bend forward, the 2 in back you bend backwards and at the same time use a another small flat screw driver and get in between the controller halfs to help it a little and do the same on all sides. It is a little stubborn but it can be done. I have done it a few times. Hope this info helps.
@@rc-jatodaniel I bought a used kart , a new battery lifepo but the car doesn't work. Only moves the front wheels and Mario with right stick. Left stick doesnt move back wheels. The controller makes a sound of a loose or broken part inside. I think the problem is the controller not the car.
@@Alexis-yk3gu Ok, try and take the controller apart and see if you can find the problem inside as you think. Otherwise you have either get a another controller as spare part or if you maybe instead want to upgrade the kart with a real ESC, servo and radio.
Number of model, please
Try this - Carrera RC 370162107X Mario Kart Mario Articelnr:2303856 Fabricationnr: 370162107X EAN: 9003150116448
このギャップが可愛い