Behringer XENYX X2222 usb mixer 👉How TO.??😓

Поділитися
Вставка
  • Опубліковано 5 лис 2024

КОМЕНТАРІ • 31

  • @aaronsmith593
    @aaronsmith593 5 років тому +5

    Mad scientist laboratory........ I'm going to rule the World with sound ha hah!!!

  • @mcirill
    @mcirill 2 роки тому

    WD40 - I wondered why it was so shiny! Lots of cool tips here how to employ the features. Thanks!!!

    • @zebbach
      @zebbach  2 роки тому

      Thanks for watching!

  • @daniel344able
    @daniel344able 4 роки тому +1

    Tanks a lot for sharing I do absolutely learn from you. Tanks a lot sir.

    • @zebbach
      @zebbach  4 роки тому +1

      I'm glad you found this video helpful

  • @wmextra
    @wmextra 3 роки тому

    Thank you for the knowledge

  • @ChumlyPage
    @ChumlyPage 2 роки тому

    thank you ....

  • @hobonickel840
    @hobonickel840 Рік тому

    Thanks for the lesson and content...
    What cables are you using in this video or do you recommend ... did those come as a set? and what is the cable called you used to loop distortion?

  • @EstudioSalaSecreta
    @EstudioSalaSecreta 9 місяців тому

    how can I see the sub 1-2 outs signal level on level meter without suming it to the main signal?
    im sending it as isolated Chanels to my interface and would like to set the levels properly

  • @chris197761
    @chris197761 3 роки тому

    I have the same unit 3 yrs now use during weekend, have not fully explore the capability of the mixer, like inserts at the back panel, aux return. I have a query about the usb interface if it is stereo or mono, want to do panning for our recordings. Thank you for sharing.

  • @peteryousef5177
    @peteryousef5177 2 роки тому

    hello, please i have question. if i connect Trs to 1/4" Male TRS to 1/4" Female TS Insert Direct-Out Adapter ? can change insert to work a direct our ?
    or
    sec ,way if i connect TRS male to adapter Ts female to trs male. can change the insert to work a direct out ?
    i have the same mixer

    • @zebbach
      @zebbach  2 роки тому +1

      ??? Hi... Why you use male to female to get male back?For insert you need Y cable
      You need duble ring jack to put in mixer(send in) 11:30 time please watch on video ...only Y cable will works....nothing else .. .

    • @peteryousef5177
      @peteryousef5177 2 роки тому

      @@zebbach i have personal monitor mixer and i need to connect ike that without effect on sound on mixer or remove Half Ts

    • @zebbach
      @zebbach  2 роки тому

      @@peteryousef5177 Hey..is lot of outputs to do that min 6 out..????+ any send 12more ...I still can't understand what you are looking for ...
      before was insert now you lookig for out ?? 😁if you decide ... let me know at the moment i'm confused...🙃🙃
      🤫

    • @peteryousef5177
      @peteryousef5177 2 роки тому

      @@zebbach yes i need to change from insert to work as direct out

  • @davidmulholland6054
    @davidmulholland6054 8 місяців тому

    Hi, do you still need an amp to put these through to use Live?

    • @maerok1
      @maerok1 Місяць тому

      No, only your P.A

  • @skstudios5632
    @skstudios5632 Рік тому

    I’m facing difficulty in getting right output from iPad input. Could someone help me please? I’m with a charity, would need some advice please. Happy to share more info thru DM.

  • @mariovalente7089
    @mariovalente7089 2 роки тому

    Hi I just bought this mixer and when I record a track from a stereo input (for example from a cd player) to the pc in audacity the signal is recorded only through the left channel in mono, if set in stereo on audacity, it records me in stereo , but from the mixer the signal comes to me only from one channel and precisely from the left one. For example on the main it never records only when I turn up the left channel, if I turn up the right main there is no signal to the pc. I recently bought it and would like to understand if it is normal or defective. Thanks in advance for your help

    • @zebbach
      @zebbach  2 роки тому

      If you have stero track ( on player use spliterL-R) put input on ch 1(Left) and on ch2 ( right) in mikxer make pan hard left on ch1 and hard right on ch 2 on mixer . On ch 1 open send 1 on ch 2 send 2 . NOW .... you if you take the signals from aux send 1 and aux send 2(you will need two 1/4 inch cables) you have stero on 2 cables L and R.Set up DAW one track stero and put calbes 1 and 2 correctly to the interface ... you will have stero fom mikser. in DAW..OR....put stero mixs from payer in stero ch of mikser ( 4 channels on left side of mikser) open send 1 ...on send one aux is sygnal (probably mono) try to put on the spliterster ( stereo to mono L +R ) check if you have a stero there (I personally don't believe).To have stero inDAW you need USB cable to conect mixer to comp you always have one track to your DAW.... ONLY ONE stero track to record in DAW. I'm afraid that you will need to get the driver from Pre sonus URL(driver to X2222) .once installed your DAW will see the entire mixer as one track(stero).Without USB cable you always have stereo out on the 4 mixer outputs on back of unit...

  • @kennyyybunny
    @kennyyybunny 3 роки тому

    I have a problem with mine. If I connect a mic with XLR I can get input sound but using the line in jack tsr I have no signal. Is there any reason why? Thank you

    • @zebbach
      @zebbach  3 роки тому +1

      hi...please check it on another device with tsr conection input ....try another cabl ....you need mono jack not
      stero..

  • @talina-vocalcoach7385
    @talina-vocalcoach7385 4 роки тому

    you have not demonstrated how to record with USB. How to instal drivers.

    • @etiennnelacroix4653
      @etiennnelacroix4653 3 роки тому

      go to behringer site, download the driver, after that you should see it as an input in your DAW. Works well. Be mindful of what he says around 18:40 in the video

  • @longdongsilver4719
    @longdongsilver4719 4 роки тому

    How to what?

  • @thenemophilist8559
    @thenemophilist8559 4 роки тому +2

    This is a parody, right? Wtf??? 🤣

  • @bikemike9789
    @bikemike9789 4 роки тому

    Scheiss Musik.

  • @terryleewest11
    @terryleewest11 2 роки тому

    cant understand A word of mumbling you are saying. try english!!!

    • @zebbach
      @zebbach  2 роки тому +1

      My American friends have no problem understanding me at all, if you have -sorry