Just some quick tips. It’s slow. Give it time. The descaling process takes over 20mins. When it’s done the light still stop flashing. Don’t add more water. Don’t press any buttons. Just let it figure out it’s done. Takes annoyingly long. Once it’s done blinking all you do is rinse the water container and fill it once it’s been cleaned. Then place it back and press the start button and it will be orange then press the start button one more time. I’d rinse it a few times to make sure the descale stuff is out.
Does the flashing orange stop when it’s done descaling or just keep flashing like mine is? The water/solution is pumped through but it’s still flashing orange and doing nothing. I expected a green light to indicate it’s done
My Vertuo plus won't start the cleaning or descaling process.. the orange light starts to blink, then it just goes to a Red light. I've tried factory resetting and it still does the same.
Hi Sue, I am sorry to hear of the problems you are experiencing with your Vertuo Plus machine. Please can you send us a private message through your preferred social media channel including your member number and full primary address, and I will look into this further for you. Thank you.
Hi, Marleni. Once rinsing is complete the button will be blinking orange every 2 seconds. To take the machine out of descaling mode, hold the button and lever down simultaneously until the light either starts blinking green or becomes steady green. If you need additional assistance, please call Nespresso directly, 800.562.1465, and a machine expert will be happy to guide you.
My machine stays in the orange blinking mode too. I've followed the video 3 times and also tried not refilling the watertank, but my machine just turnsoff after a while and when i turn it on agian, it is still in the orange blinking mode.. When i leave the rinsing/descaling program, the machine still shows the half red and half orange sign.. can anyone help?
Over time and usage, the hardness of water may cause mineral build up in your machine which can affect the temperature, the flow and overall performance of your machine. Furthermore, mineral build up can also negatively impact the taste of your coffee, often making it more pungent. It's not recommended to use other solutions as Nespresso Descaling kits are specifically designed to work with our machines for the best results. Other descaling methods or competitive products haven’t been tested so we’re unable to advise their effectiveness or effect they may have on your machine.
Same thing happened to me the first time I did it. What the video doesn’t tell you is that the cycle will continue as long as there’s water in the tank. I kept adding water!😂. Fill the tank, but don’t add any more water, as soon as the machine gets to the bottom it should stop. Then press the lever down and the button for 3 seconds and it should go back to green light. Hope that helps.
These machines are the sh*ttest! I've had mine replaced three times. Just descaled following these ridiculously convoluted instructions and now it's lit up red and won't work.
My Vertuo plus won't start the cleaning or descaling process.. the orange light starts to blink, then it just goes to a Red light. I've tried factory resetting and it still does the same.
![Nespresso - [네스프레소/Nespresso] 라테 러버들의 필수템 에어로치노 파헤치기 | KR](/img/n.gif)
Just some quick tips. It’s slow. Give it time. The descaling process takes over 20mins. When it’s done the light still stop flashing. Don’t add more water. Don’t press any buttons. Just let it figure out it’s done. Takes annoyingly long. Once it’s done blinking all you do is rinse the water container and fill it once it’s been cleaned. Then place it back and press the start button and it will be orange then press the start button one more time. I’d rinse it a few times to make sure the descale stuff is out.
Kurzesgagt guy!!!!!!❤❤❤❤
That’s the first thing I thought when the video began !! 😂😂 that’s him???
Perfect Video! Right when I needed it :)
We're glad to hear that 🥰
Does the flashing orange stop when it’s done descaling or just keep flashing like mine is? The water/solution is pumped through but it’s still flashing orange and doing nothing. I expected a green light to indicate it’s done
Hello, we're sorry to hear about the problem you're facing. Please identify your location so that the respective team can assist you.
Utah, USA. I went through the entire descaling and rinsing process and it’s still showing a red and yellow light.
We're sorry to hear that. Would you please call us at 1-800-562-1465 when you are near your machine? Our machine experts will be happy to help!
My Vertuo plus won't start the cleaning or descaling process.. the orange light starts to blink, then it just goes to a Red light. I've tried factory resetting and it still does the same.
2:00 descaling
I did entire descaling/rinse process but the green/red light is still on. Any idea why? 🙏
Hello, and thanks for reaching out. Please identify your location, so the respective team can assist you.
@@nespresso Illinois
We're disappointed to hear this! Please give us a call directly, 1-800-562-1465, and a machine expert can assist you.
Excited to get my new Vertuo plus but it is stuck in rinse mode. Ive done it three times now and still blinking orange. It wont open.
Hi Sue, I am sorry to hear of the problems you are experiencing with your Vertuo Plus machine. Please can you send us a private message through your preferred social media channel including your member number and full primary address, and I will look into this further for you. Thank you.
How long does it blink for during descaling process? Mine won’t stop blinking but doesn’t do anything after that.
We're sorry to hear about the issue you're experiencing. Please let us know where you are contacting us from, so we could further assist you.
@@nespressoHi from Texas,USA. vertuo Plus machine
Hi, Marleni. Once rinsing is complete the button will be blinking orange every 2 seconds. To take the machine out of descaling mode, hold the button and lever down simultaneously until the light either starts blinking green or becomes steady green. If you need additional assistance, please call Nespresso directly, 800.562.1465, and a machine expert will be happy to guide you.
thank you!
Mine is doing the same thing and I keep adding water and never stops blinking orange - does it just take one container of water through?
My machine stays in the orange blinking mode too. I've followed the video 3 times and also tried not refilling the watertank, but my machine just turnsoff after a while and when i turn it on agian, it is still in the orange blinking mode..
When i leave the rinsing/descaling program, the machine still shows the half red and half orange sign..
can anyone help?
We're disappointed to hear this, and we'll be happy to help. Please call us to speak with a machine expert at 800-562-1465.
Is there a specific capsule for descaling ?
Over time and usage, the hardness of water may cause mineral build up in your machine which can affect the temperature, the flow and overall performance of your machine. Furthermore, mineral build up can also negatively impact the taste of your coffee, often making it more pungent. It's not recommended to use other solutions as Nespresso Descaling kits are specifically designed to work with our machines for the best results. Other descaling methods or competitive products haven’t been tested so we’re unable to advise their effectiveness or effect they may have on your machine.
It's that me Nespresso
Easy video !
Thank you! We hope you found it useful as well 😊❤️
How do you get out of rinse mode lol
Same thing happened to me the first time I did it. What the video doesn’t tell you is that the cycle will continue as long as there’s water in the tank. I kept adding water!😂. Fill the tank, but don’t add any more water, as soon as the machine gets to the bottom it should stop. Then press the lever down and the button for 3 seconds and it should go back to green light. Hope that helps.
@ghlmk5931 thanks! I kept adding water for some reason 😂
Mine didn’t use all the water to clean today. Just received
Hello, and thanks for reaching out. Please identify your location, so the respective team can assist you.
Wait isn’t this the Kürzgesagt guy??
Is this the kurzgesagt narrator?
These machines are the sh*ttest! I've had mine replaced three times. Just descaled following these ridiculously convoluted instructions and now it's lit up red and won't work.
Hello, and thanks for reaching out, we are sorry to hear that. Could you please identify your country, so we can further look into this?
@@nespresso US. I reached out to customer support already and they couldn't help.
We're sorry to hear this. Please DM your Nespresso account number and we'll be happy to help assist you.
Geeez...I am confused.
My Vertuo plus won't start the cleaning or descaling process.. the orange light starts to blink, then it just goes to a Red light. I've tried factory resetting and it still does the same.