If you would paint and weather them a little, it would look great i think! Yes the bare metal has its very own charme, bute i think it would turn out awesome!
My dad used to have a business card for some soil science consultant with a little comic of people building the Tower of Pisa with one guy saying to the other "And we can save a fortune if we skip the soil tests!" That always cracked me up.
My favorite I've done is the USS Missouri, just because of its size. It's 3 sheet kit but the completed model is close to TWELVE INCHES LONG. Its absolutely massive compared to other metal earth kits. The hardest part of ships is always forming the contours of the hull.
I took the risk and chose iron man as my second model and surprisingly made it through, the legs were a pain in the ass though, I've done war machine as well
All I have to say is WOW!!! That is an amazing collection!! I only have 3 and that are all only 3 stars by the metal Earth rating. This was a really cool video and it opened my eyes to all of the sets out there. Thank you!
I know this comment is 7 years after but I had to say something because I’m almost finished with the Mars Rover for a friend who has his name on a plaque that’s supposed to go to Mars. I’ve built all types of models, my own RV aircraft and am a hobby machinist. Short of electrical, I used every skill I acquired over 50 years of working with metal except on a miniature scale. These little kits presented a very rewarding challenge with equal amounts of frustration. When I first started building it I thought there was no way I’d ever do this again but I was committed to finishing it. I have a warning for anyone, I think building them is seriously addictive. My only tip is get some tools mentioned in these comments and other videos. I only stumbled across the videos today and didn’t realize how popular they are. Thanks for sharing your models and information.
Awesome review. I remember building the Warthog , my third kit. It was the first model where I broke a piece. I realized then I wish there was a really detailed build video that showed how people actually bent and worked the metal for these kits.
Great reviews and tips. Here's one for everyone. When doing any curved surface use a appropriate size dowel and a mouse pad. Roll it like you would a rolling pin and you'll get perfect curves with no creases.
5:24 That building is probably the hardest and most fragile building I've done. It broke on several taps and I was ready to just give up but i managed to finish it. But as you said, there is several design flaws in it making it hard to make perfect.. I use tape to hold some thing in to place. Ive built around 20 puzzels :)
Just built the A-10 warthog, most frustrating thing i have ever done... I built the tie bomber and im pretty sure i glued half of it... the biggest problem i have with these are the directions being very unclear sometimes and forming circles.
I’m a plastic models for years , I’m 57 years/o and I do recommend this metal models I just recently discovered like 2 years ago but is really relaxing and satisfying hobby.
Fantastic collection thanks for sharing I just began my first model. Tiger tank. And the tracks definitely caused many curse words for me. Hats off to you sir. I will follow your work as I build my total collection if I survive the gauntlet 😬
My third metal earth model is Iron Man , the first two being R2D2 and Imperial Star Destroyer. Broken quite a few pieces and there were times I thought I would give up but I'm glad that I put it through. I would say the shin parts are virtually impossible to fit in. Overall it's an incredible artwork with minor flaws.
i'm only interested in the star wars models, but not sure how to make these things at all. i had no idea all these others existed! so cool. i'll see if i can find a how-to or at least tips-and-tricks video and see if these little beauties are something do-able for old eyes and hands.
I always add a touch of superglue whenever I have loose fitting connections like on your Snow Speeder. It is also pretty handy for reattaching parts when you accidentally bent a piece back and one too many times and it snaps and breaks on you. It truly is an invaluable tool for making these models, especially the ones with a lot of really small pieces. The only problem that I have ran into with superglue (like the super thin liquid super glue in small bottles) is how long it takes for the glue to set up. It honestly isn't a big complaint really, it would just make things a tiny bit easier to assemble in certain spots. I have experimented with hot glue for its quicker drying time, but it really doesn't seem to want to stick to the metal very well. Super glue in those really small syringes would be best for precision, and ease of use. There are other faster drying superglues, I just don't happen to have any on hand at the moment.
@@johnbangkok5004 i feel like that would end up wasting a ton of epoxy, though. Like, I just use super glue as needed, which is probably less than ten times through an entire build, and when I do use it there is typically a good stretch before I need to use it again. Seems like the epoxy would set up before I could use all of it, even if I only mixed it up in small batches. Plus it would be overkill in terms of how strong it is. That did make me think about UV resin, though. Pretty sure that stuff sets within seconds of shining the UV light on it, so that could potentially be useful. It would be difficult for some areas where you can’t get a good angle on the light to be able to set the resin, but all in all that might be one of the better options. That said, a medium viscosity super glue with a really fast dry time is still the ideal option, imo.
Really cool video, thanks. I bought a couple of these at a star wars themed store on a whim thinking that they were for kids and it would be a fun quick little thing. I had no tools to speak of, I'm currently using fingernail scissors (plus some folding) to separate the pieces off of the sheets and tweezers to put the things together. I have some needle-nose pliers but I like the tweezers as they feel a bit more precise to me. The rounded parts are the hardest for me, I've had more success making a pretty rough shape to connect and then adjust into a better circle. I did an x-wing first (not the one you have though, apparently there are two x wings), then I did the first order snowspeeder, and recently I picked up the model t. Unfortunately none of these are on your list, I was hoping to get a feel for how difficult these are in relation to the rest. At first I was surprised that they weren't that easy, but I think I've gotten the hang of them (at least the ones I've done). Yours all look great. In particular I think the tanks and the capitol building look the coolest so I might go for one of these next.
I purchased the Captain America shield today. It was my first one. Wasn’t too difficult. I just don’t like the way they designed it. The shield has a huge split down the middle that runs about three quarters in, and you are to put the two ends together and “close” the split. Finished product you can still easily see the split down the middle if you’re really looking. Still really fun. Nice collection, I’ll be purchasing more!
I just started one and I have another one after that. neither of them are the ones in your video though. I can already tell it takes patience and delicate hands. I don't think ill have the patience to do anymore after.
I built a small pirate ship model as my first and quickly realized that there were a few parts of instruction that probably should’ve been done either earlier or later than it says to. Otherwise, these are my favorite thing to do, especially the colored ones
Cones can be difficult but they can also be really really easy if you use the sharpened end of a pencil to form them, just a little trick I picked up along the way of starting these before I had a jewelers tool set but I still use a pencil for cones.
I'm surprised you thought the Neuschwanstein Castle was simple. That thing drove me crazy from start to finish. We must have gotten different versions of the Dubai hotel. I finished that one in less than 15 minutes while watching TV. I thought it was as easy as the Eiffel Tower. [EDIT: Your model is the Iconx version. Haven't built that yet but it looks hard. I made the ME version.] Those are my only disagreements. Thanks for posting this video. Anybody thinking about getting into Metal Earth models should watch this first so they don't try to start out with a Tie Fighter or something and get frustrated right off the bat.
kdog909 I started with the tie bomber and im pretty sure i super glued half of it... Just finished the A-10 warthog and it made me want to smack anyone i saw...
Fellow Communist (nice user name!) I started with the Darth Vader Tie Fighter. Turned into a super-glued mess as well. Start with easy ones like the Metal Earth Eiffel Tower (15 minutes, no frustration), and work your way up from there. Other super easy ones, other than what's mentioned in the video, include the Metal Earth Arc de Triomphe and Burj al Arab (not the Iconx versions) If you like Star Wars, the Imperial Star Destroyer is the easiest (guy in video seems to agree). Takes maybe 30-40 minutes, with very little difficulty
Wow nice collection, I’m building my first one, the Freightliner FLC truck and it’s hard as hell! I just bought my second, it’s the English Armor, and your comments on the iron man model have me a bit worried haha
I used a highlighter cap to bend the curved pieces of the roof of Himeji. I like how it turned out, but you are right there are problems with it. I got mine from Banggood at $4.00.
I just finished Optimus Prime, 2 sheets and managed without too much trouble but after that i can understand the stress you got into with some of the pieces you show.
I mostly agree with your assessments, and Iron Man WAS a PITA - but it came out awesome so worth it - but I think the ICONX Saint Basil's Cathedral is a very close second - and also one of the most impressive models I have.
I'm doing my first model right now and it's the Himeji Castle, so I think it's a pretty fun thing and I'm going to do as many as I can! I find this video pretty helpful. Also you said iron man was a pain in the ass, and I though, 'what, in the movies or in the model, cause he's a pain in the ass in both'
The first metal earth design i got was the Leaning Tower of Pisa and it pretty wack, i thought i was bad but luckily i heard that he also had design issues with it.
Have you done the Cessna 182 floatplane I done the Cessna 182 floatplane it was pretty long but it was easy model to build the chairs were the hardest part for the rest was easy except the tabs were really hard to bend I must have to use my hands against the table to get it and I use super glue for the struts and the floats
Great video. I got some of the Star Wars models when we went to Disney World and then bought a collection of monuments (Big Ben, Eiffel Tower, etc.)Having a really hard time with them. Got any tips?
I definitely recommend starting with the monuments. You need tweezers and/or needle nose pliers, some round items to bend curved parts on (screw driver shafts, pencil, dowel rods etc) possibly some glue. I like to bend the pieces back and forth until they fall off the sheet but some people prefer wire cutters. I don't know what else to recommend right now, try searching Metal Earth Tips and Tricks. Good luck!
I love althe notre dame in color one and the black and gold piececool pirate ship and the massuve castle from gane of thrones is huge i love metal earth over any other brand cause jts very detailed models but small so they look amazing cause kf the size and all the detail
I don’t think you covered the Star Wars at-at. I’m working on it now. It’s a bitch for my first go at these models. What did you think of that particular one?
I am on my fifth kit. I built the F4u Corsair, B17 Bomber, Star Trek Enterprise, and Cessna 172. I am working on the dragonfly now. Of all of these, the Cessna was the most difficult. It is only one sheet, but it had some real challenges. The rear window of the cabin has to be bent before attaching that section to the sides. If it is not bent, the tabs for the wings will be too far apart. The attachment for the propeller is weird and kept falling off. I would attach it last. Finally, the bottom of fuselage required manipulating it between the sides to fit six tabs. I found this impossible. I got the back four tabs into their slots and just bent the front part into position.
Built my 1st today - the Red Barron tri wing plane. Wish someone would show more step by step builds on utube- at least the hard parts - like the spark plugs in the engine - Arg !!
I want to point out that the Fascinations website has difficulty levels listed for all their models. Problem is, I think they come up with the ratings based on number of pieces and/or steps. Not very reliable. I just finished a model (Shanghai Financial Center) that only had seven pieces and four steps that turned out to be extremely hard.
These are difficult kit ! View it as a challenge. I've just finished the Hogwarts Express Iconx and it a real challenge. The hand rail along the boiler are so small it is impossible not to bent them. Nice result .
hey great collection. i have been buying these since last year and i got around 50 of them, but only got 3 done. what do you use to glue some parts in if in case it breaks of or something? thanks.
on occasion I've needed glue and I've had great success with model CA glue. So far I've always gotten away with using it on the tabs on the inside so it's never been visible. plus with CA glue you put it on, maneuver the parts exactly where you want them, then spray or dab on the accelerator and it dries instantly.
Some of these metal earth models are expensive. The prices start from $6.00 to $34.00 depending on model, license, level, gold, color, and attractiveness according to what metal earth model you buy off from Amazon Prime.
you show the Imperial Star Destroyer but don't mention where its ranked.. i threw mine in the trash.. the top and bottom halves were NEVER going to fit.. so frustrated
jeff hightshoe just finished building the ISD. Fitting the top and bottom was the most satisfying part. Don’t give up if you are frustrated. Maybe you did not put the middle parts in correctly
I "completed" the Delorean in about 10 hours with nippers and tweezers. I broke three parts but the rest still fit. It was my first one and and really fun but pretty difficult
I just build my first.. The millennium falcon.. Which i saw and bought at disneyland Paris saturday.. I never even heard of metal earth😝 i thought i would do it in no time.. But its actiually pretty though. Then i got on yt and found this video.. Awsome Collection man! And your pain in the butt and ass comments made me laugh out loud🤣
A few days ago I built the X-Wing as my first model of these. To almost perfect condition. Took just over 4 hours. With my right hand in a SERIOUSLY immobilizing casting after I had broken my wrist. Is the X-Wing model just that easy or can I actually say I've got some skills at this kinda stuff?
you must have a pretty sore butt
so much pain
Well I haven't built any new models in months so it's all healed now. lol
🤣🤣🤣
If you would paint and weather them a little, it would look great i think! Yes the bare metal has its very own charme, bute i think it would turn out awesome!
I was going to coment this after he said it 5+ times lol
"Leaning tower of Pisa has some design flaws" hahahaha
lmao
Yeah us Italians forgot to put the foundation 😂 measure 1 cutta 3 or issa other way round oh well moto benne jussa turna you head
My dad used to have a business card for some soil science consultant with a little comic of people building the Tower of Pisa with one guy saying to the other "And we can save a fortune if we skip the soil tests!"
That always cracked me up.
I chuckled a little when he said that too.
I thought he said Pizza. lol
You know a model is difficult when this guy says pain in the ass instead of pain in the butt.
Desi, What about my metal models? www.kickstarter.com/projects/timeformachine/the-most-beautiful-construction-set-in-the-world
🤣🤣🤣
They’re literally fucking impossible to put together. I don’t know how the hell this guy did it
From what I got out of this is don't do them drunk or on low amounts of sleep.
Yup. I did the parthenon in that condition... ended up stabbing my finger tip in the same spot like 6 times.
My favorite I've done is the USS Missouri, just because of its size. It's 3 sheet kit but the completed model is close to TWELVE INCHES LONG. Its absolutely massive compared to other metal earth kits. The hardest part of ships is always forming the contours of the hull.
Thank you posting your lovely collection. Wonderfully detailed and intricate designs. I have just ordered my first model, Titanic. Feeling excited :)
I took the risk and chose iron man as my second model and surprisingly made it through, the legs were a pain in the ass though, I've done war machine as well
Check out these metal models) www.kickstarter.com/projects/timeformachine/the-most-beautiful-construction-set-in-the-world
My first model is terminator endoskeleton, probably not a good first one………
All I have to say is WOW!!! That is an amazing collection!! I only have 3 and that are all only 3 stars by the metal Earth rating. This was a really cool video and it opened my eyes to all of the sets out there. Thank you!
I know this comment is 7 years after but I had to say something because I’m almost finished with the Mars Rover for a friend who has his name on a plaque that’s supposed to go to Mars. I’ve built all types of models, my own RV aircraft and am a hobby machinist. Short of electrical, I used every skill I acquired over 50 years of working with metal except on a miniature scale. These little kits presented a very rewarding challenge with equal amounts of frustration. When I first started building it I thought there was no way I’d ever do this again but I was committed to finishing it. I have a warning for anyone, I think building them is seriously addictive. My only tip is get some tools mentioned in these comments and other videos. I only stumbled across the videos today and didn’t realize how popular they are. Thanks for sharing your models and information.
Awesome review. I remember building the Warthog , my third kit. It was the first model where I broke a piece. I realized then I wish there was a really detailed build video that showed how people actually bent and worked the metal for these kits.
Good work thanks for the vid. My 1st was a B-17 I gave to my wife’s grandfather who jumped out of one in WWII. I think it took
This stuff is actually really fun if you have lots of patients and you did a great job.
Great video man, well done on all of them.... IRON man the best, looks very impressive. Do you do a twitch stream... you should, on your builds.
Great reviews and tips. Here's one for everyone. When doing any curved surface use a appropriate size dowel and a mouse pad. Roll it like you would a rolling pin and you'll get perfect curves with no creases.
5:24 That building is probably the hardest and most fragile building I've done. It broke on several taps and I was ready to just give up but i managed to finish it. But as you said, there is several design flaws in it making it hard to make perfect.. I use tape to hold some thing in to place. Ive built around 20 puzzels :)
Just built the A-10 warthog, most frustrating thing i have ever done... I built the tie bomber and im pretty sure i glued half of it... the biggest problem i have with these are the directions being very unclear sometimes and forming circles.
I’m a plastic models for years , I’m 57 years/o and I do recommend this metal models I just recently discovered like 2 years ago but is really relaxing and satisfying hobby.
Fantastic collection thanks for sharing I just began my first model. Tiger tank. And the tracks definitely caused many curse words for me. Hats off to you sir. I will follow your work as I build my total collection if I survive the gauntlet 😬
How many times exactly did he "that was a pain in the but"?
!LOL
Nic Cage does model making
Wow! You have an awesome collection...i just bought a Tiger I model (my first model)and had just started placing a couple of pieces.
My third metal earth model is Iron Man , the first two being R2D2 and Imperial Star Destroyer.
Broken quite a few pieces and there were times I thought I would give up but I'm glad that I put it through.
I would say the shin parts are virtually impossible to fit in.
Overall it's an incredible artwork with minor flaws.
well, accidently tapped this video, just subscribed, not an accident
i'm only interested in the star wars models, but not sure how to make these things at all. i had no idea all these others existed! so cool. i'll see if i can find a how-to or at least tips-and-tricks video and see if these little beauties are something do-able for old eyes and hands.
I always add a touch of superglue whenever I have loose fitting connections like on your Snow Speeder. It is also pretty handy for reattaching parts when you accidentally bent a piece back and one too many times and it snaps and breaks on you. It truly is an invaluable tool for making these models, especially the ones with a lot of really small pieces.
The only problem that I have ran into with superglue (like the super thin liquid super glue in small bottles) is how long it takes for the glue to set up. It honestly isn't a big complaint really, it would just make things a tiny bit easier to assemble in certain spots. I have experimented with hot glue for its quicker drying time, but it really doesn't seem to want to stick to the metal very well. Super glue in those really small syringes would be best for precision, and ease of use. There are other faster drying superglues, I just don't happen to have any on hand at the moment.
Epoxy glue 2 parts
@@johnbangkok5004 i feel like that would end up wasting a ton of epoxy, though. Like, I just use super glue as needed, which is probably less than ten times through an entire build, and when I do use it there is typically a good stretch before I need to use it again. Seems like the epoxy would set up before I could use all of it, even if I only mixed it up in small batches. Plus it would be overkill in terms of how strong it is.
That did make me think about UV resin, though. Pretty sure that stuff sets within seconds of shining the UV light on it, so that could potentially be useful. It would be difficult for some areas where you can’t get a good angle on the light to be able to set the resin, but all in all that might be one of the better options. That said, a medium viscosity super glue with a really fast dry time is still the ideal option, imo.
Have you done the James webb? That one took me forever.
I got a few of those online just now.. they look so neat and fascinating
Really cool video, thanks. I bought a couple of these at a star wars themed store on a whim thinking that they were for kids and it would be a fun quick little thing. I had no tools to speak of, I'm currently using fingernail scissors (plus some folding) to separate the pieces off of the sheets and tweezers to put the things together. I have some needle-nose pliers but I like the tweezers as they feel a bit more precise to me. The rounded parts are the hardest for me, I've had more success making a pretty rough shape to connect and then adjust into a better circle.
I did an x-wing first (not the one you have though, apparently there are two x wings), then I did the first order snowspeeder, and recently I picked up the model t. Unfortunately none of these are on your list, I was hoping to get a feel for how difficult these are in relation to the rest. At first I was surprised that they weren't that easy, but I think I've gotten the hang of them (at least the ones I've done).
Yours all look great. In particular I think the tanks and the capitol building look the coolest so I might go for one of these next.
I purchased the Captain America shield today. It was my first one. Wasn’t too difficult. I just don’t like the way they designed it. The shield has a huge split down the middle that runs about three quarters in, and you are to put the two ends together and “close” the split. Finished product you can still easily see the split down the middle if you’re really looking. Still really fun. Nice collection, I’ll be purchasing more!
I just started one and I have another one after that. neither of them are the ones in your video though. I can already tell it takes patience and delicate hands. I don't think ill have the patience to do anymore after.
Damn i dont know how he manages to build these tiny models when his finger be shaking like a stripper... much props and respect ✊ to him
isn’t it… shaking like a stripper in church?
Feels like I just went through a miniature museum.
I just tried to put the World Trade Center together and two tabs broke and it wouldn’t even bend and line up right so I gave up
I built a small pirate ship model as my first and quickly realized that there were a few parts of instruction that probably should’ve been done either earlier or later than it says to. Otherwise, these are my favorite thing to do, especially the colored ones
I didn't know Nicolas Cage was into these kits.
Where’s the CSM for the Lunar Module LM?
Cones can be difficult but they can also be really really easy if you use the sharpened end of a pencil to form them, just a little trick I picked up along the way of starting these before I had a jewelers tool set but I still use a pencil for cones.
Can you do more video on metal earth
You are literally too good I found the mars rover very hard but that is probably because it’s the first model I’ve ever built in this category
I'm surprised you thought the Neuschwanstein Castle was simple. That thing drove me crazy from start to finish.
We must have gotten different versions of the Dubai hotel. I finished that one in less than 15 minutes while watching TV. I thought it was as easy as the Eiffel Tower. [EDIT: Your model is the Iconx version. Haven't built that yet but it looks hard. I made the ME version.]
Those are my only disagreements. Thanks for posting this video. Anybody thinking about getting into Metal Earth models should watch this first so they don't try to start out with a Tie Fighter or something and get frustrated right off the bat.
kdog909 I started with the tie bomber and im pretty sure i super glued half of it... Just finished the A-10 warthog and it made me want to smack anyone i saw...
Fellow Communist (nice user name!) I started with the Darth Vader Tie Fighter. Turned into a super-glued mess as well.
Start with easy ones like the Metal Earth Eiffel Tower (15 minutes, no frustration), and work your way up from there. Other super easy ones, other than what's mentioned in the video, include the Metal Earth Arc de Triomphe and Burj al Arab (not the Iconx versions)
If you like Star Wars, the Imperial Star Destroyer is the easiest (guy in video seems to agree). Takes maybe 30-40 minutes, with very little difficulty
Someone wanna cou t how much times he said "It was a pain in the butt" ha.
we need an updated video about this!
Amazing video and collection!!! I ordered the Titanic model. Super excited!
Check out this) www.kickstarter.com/projects/timeformachine/the-most-beautiful-construction-set-in-the-world
Dr. McCoy: Damn it Jim! I'm a Model Builder, not a Watch Maker.
Wow nice collection, I’m building my first one, the Freightliner FLC truck and it’s hard as hell! I just bought my second, it’s the English Armor, and your comments on the iron man model have me a bit worried haha
loved the iron man comment on making a man cry those look great nice job friend
I used a highlighter cap to bend the curved pieces of the roof of Himeji. I like how it turned out, but you are right there are problems with it. I got mine from Banggood at $4.00.
I just finished Optimus Prime, 2 sheets and managed without too much trouble but after that i can understand the stress you got into with some of the pieces you show.
Great collection! I've had some parts that did come a bit loose, like the cannons you mentioned. A Small drip of superglue will do the trick there!
Kinda defeats the purpose
I mostly agree with your assessments, and Iron Man WAS a PITA - but it came out awesome so worth it - but I think the ICONX Saint Basil's Cathedral is a very close second - and also one of the most impressive models I have.
+jlazell hey I think that was a Skyhopper up there? What can you say about that one? Planning on getting my friend one
I'm doing my first model right now and it's the Himeji Castle, so I think it's a pretty fun thing and I'm going to do as many as I can! I find this video pretty helpful.
Also you said iron man was a pain in the ass, and I though, 'what, in the movies or in the model, cause he's a pain in the ass in both'
i have the golden gate bridge and i was wondering would it be hard to put together, thanks for sharing going to order more on ebay.
I thought the buttresses on the Notre Dame model as being super hard to keep looking straight.
What about the lamda shuttle?
Big Ben is the name of the bell that actually name of the building is called Elizabeth Tower
how you clean your metal earth models?
a tip for round pieces or making a cone is using jewelers ring plyers
The first metal earth design i got was the Leaning Tower of Pisa and it pretty wack, i thought i was bad but luckily i heard that he also had design issues with it.
@Guan Wang It won't let me reply to your comment???? But I got the gold models at Amazon.
If you try the iron man and get scratches on it just say he was in battle
where is the Avro Lancaster they make?
..that's awesome dude!..i didn't even know they made buildings like that!..the lunar lander looks sweet!..how much was it?
Hey awesome ranking!! How would you rate the Hubble Telescope? Is it difficult?
Have you done the Cessna 182 floatplane I done the Cessna 182 floatplane it was pretty long but it was easy model to build the chairs were the hardest part for the rest was easy except the tabs were really hard to bend I must have to use my hands against the table to get it and I use super glue for the struts and the floats
Amazing collection! nice work!
did you see the big Iron Man model that has a ton of sheets and selling for about 50 bucks on aliexpress?
Great video. I got some of the Star Wars models when we went to Disney World and then bought a collection of monuments (Big Ben, Eiffel Tower, etc.)Having a really hard time with them. Got any tips?
I definitely recommend starting with the monuments. You need tweezers and/or needle nose pliers, some round items to bend curved parts on (screw driver shafts, pencil, dowel rods etc) possibly some glue. I like to bend the pieces back and forth until they fall off the sheet but some people prefer wire cutters. I don't know what else to recommend right now, try searching Metal Earth Tips and Tricks. Good luck!
"You're a better man than me, Gunga Din."
I just put together the enterprise d and it looks flawless no problems with the stand or anything! looks better than their model on the site
I love althe notre dame in color one and the black and gold piececool pirate ship and the massuve castle from gane of thrones is huge i love metal earth over any other brand cause jts very detailed models but small so they look amazing cause kf the size and all the detail
Oh also did you use glue?
I don’t think you covered the Star Wars at-at. I’m working on it now. It’s a bitch for my first go at these models. What did you think of that particular one?
I made world trade 1 as my first model. It was definitely a good one to start with. Only took me about 15 minutes.
Can you make a list in the video description of your ranking (easiest to hardest)? Awesome video!
+lawrobi Good idea! I'll rank them in the Description.
I am on my fifth kit. I built the F4u Corsair, B17 Bomber, Star Trek Enterprise, and Cessna 172. I am working on the dragonfly now. Of all of these, the Cessna was the most difficult. It is only one sheet, but it had some real challenges. The rear window of the cabin has to be bent before attaching that section to the sides. If it is not bent, the tabs for the wings will be too far apart. The attachment for the propeller is weird and kept falling off. I would attach it last. Finally, the bottom of fuselage required manipulating it between the sides to fit six tabs. I found this impossible. I got the back four tabs into their slots and just bent the front part into position.
man your origami skills are on some crazy next level shit!
cool! I just finished the Yamato battleship. probably the hardest one I've done so far
Built my 1st today - the Red Barron tri wing plane. Wish someone would show more step by step builds on utube- at least the hard parts - like the spark plugs in the engine - Arg !!
i just made my first one, the tiger tank, my most annoying struggle was getting a nice crisp 90degree bend with the insertion tabs, how did u do it?
I hated that last step where u connect the bottom
IKR!!!
Erik Binnix I know it's hard
I want to point out that the Fascinations website has difficulty levels listed for all their models. Problem is, I think they come up with the ratings based on number of pieces and/or steps. Not very reliable. I just finished a model (Shanghai Financial Center) that only had seven pieces and four steps that turned out to be extremely hard.
Notice the use of pain in the butt and pain in the ass
why are you doing all of these on like no sleep or late at night lol
Has any of you done the lighthouse one?
Did you skip R2-D2?
What do you do when you break a piece? I broke a few of mine on the X-Wing
You forgot the whithouse in the description
I haven't built the white house but the Capitol building is listed.
where did you got those gold models?
These are difficult kit ! View it as a challenge. I've just finished the Hogwarts Express Iconx and it a real challenge. The hand rail along the boiler are so small it is impossible not to bent them. Nice result .
just out of curiosity, this metal earth models seems very elegant
and sturdy, other than this brand what do u suggest to try?
hey great collection. i have been buying these since last year and i got around 50 of them, but only got 3 done.
what do you use to glue some parts in if in case it breaks of or something? thanks.
on occasion I've needed glue and I've had great success with model CA glue. So far I've always gotten away with using it on the tabs on the inside so it's never been visible. plus with CA glue you put it on, maneuver the parts exactly where you want them, then spray or dab on the accelerator and it dries instantly.
Some of these metal earth models are expensive. The prices start from $6.00 to $34.00 depending on model, license, level, gold, color, and attractiveness according to what metal earth model you buy off from Amazon Prime.
you show the Imperial Star Destroyer but don't mention where its ranked.. i threw mine in the trash.. the top and bottom halves were NEVER going to fit.. so frustrated
jeff hightshoe just finished building the ISD. Fitting the top and bottom was the most satisfying part. Don’t give up if you are frustrated. Maybe you did not put the middle parts in correctly
I "completed" the Delorean in about 10 hours with nippers and tweezers. I broke three parts but the rest still fit. It was my first one and and really fun but pretty difficult
Good video! Look to get into these
I just build my first.. The millennium falcon.. Which i saw and bought at disneyland Paris saturday.. I never even heard of metal earth😝 i thought i would do it in no time.. But its actiually pretty though. Then i got on yt and found this video.. Awsome Collection man! And your pain in the butt and ass comments made me laugh out loud🤣
Yes sir. I got like 30 of these done. Tedious
A few days ago I built the X-Wing as my first model of these.
To almost perfect condition.
Took just over 4 hours.
With my right hand in a SERIOUSLY immobilizing casting after I had broken my wrist.
Is the X-Wing model just that easy or can I actually say I've got some skills at this kinda stuff?
What tools did you use to get everything so perfectly round, I can't even do it on the Mars rover.
New Game: Every time he says "Pain in the ...." Drink