Not sure what I like more about your shows -- the fact you're having so much fun or that you are excellent modelers. So I'll just enjoy. Thank you! Tom Kibbe
Wish they did!! Karyn can do this but I’m having problems anymore with shaking hands and so on. So I’m sticking to 1:20 scale trains and 1/8 scale autos!
You two are always discovering new things-I think they're new. It was fun watching the discussion, execution and displaying these wonderful little kits. They look tedious but rewarding. Further Screwing Around should include the Eccles Organ Festival Recitals in the Cathedral of the Madeleine. Some very fine pipe organ music.
So many. There was a time in about 1950 when most modelers knew mostly what was available. Not counting old wood and paper kits. But now there are hundreds of thousands if not millions
They are great looking models and you have done such a good job of them Karyn. Being a railway buff I like the look of the locomotive and will be interested to see it finished
Oh my! Love those models! I had seen those types of kits at Hammonds Toys hobby store last year. I was sceptical on picking one up, but after seeing Karyns I'll have to try one out! Thanks again for another great episode!
Start with one of the easy ones.. They go together fast, and that way you get an idea of how the more complicated ones will go. I also use a pen or pencil to cross through each step of the instructions, after completion. That way, I don't lose track of where I am when I resume the project. It will take a bit longer to assemble the more complicated ones. Good luck! Enjoy!
Interestingly it seems that they use Bachmann trains as their prototypes for the railroading models. The loco you have is a dead ringer for the ON30 mogul, right down to using the same number, there 4-4-0 is a copy of Bachmann's updated HO model which in turn is based off Rivarossi's models, and their "Complete Freight Train" uses the Bachmann Rail Chief set.
Accucraft 1:29 models were mostly taken from Rivarossi HO models. That’s how they ended up 1:29. 3x29=87. So exactly 3 times bigger. I did the show in scale and gauge. Need to redo it but that’s explained in there. The pattern models were done in 1:29 and the molds pantographed to 87.
That Concord stagecoach really is beautiful. Love the detail. Would have to keep them in a glass case to keep them clean I suppose. I'd hate to have to dust them if they were just placed on a shelf.
Those look great, too small and delicate for my old eyes but they are very Cool Great job Karyn, please show us the locomotive when you finish it Rick B aka Plastic butcher
Very cool! My husband has several of those Metal Works he built. He even built the Seattle Space Needle. But he gave that one away to a friend who was from Seattle. Anyway, gotta love those hobbies. I build model train layouts and so I really enjoy the road trips you two take and all the neat model trains. The Evanston, WY video was cool because we live only an hour and a half away and we went to that train show. Thanks for the great videos!!
I think Evanston is an hour and a half away from just about everything! No matter where you are, there it is an hour and a half away! But it’s a great train show.
Tram at 0:59 appears to be a Melbourne (Victoria, Australia) tram car No 884 of the SW6 class, built 1943. Original it would have been fitted with a pole at both ends to collect power off the overhead. The model is depicted with a pantograph. The multiple lights either side of the headlight were fitted in the early 1970's. From what I can see this tram is not listed as being in service or preserved, although sister tram 916 is shown as being in San Francisco, California.
YUP THATS THE ONE!!! Really hard to build. But looks great. Trolley poles. I can see why the used a pantograph. Looks cool. But in the real world back then it was mostly poles. On our local Kennacott line they had both! Pantograph and a higher voltage on the main. Trolley poll, center mounted that swings in both directions on the other tracks. Really impressive to watch them switch from the pole to the pantograph. Like fireworks 🎇
Keep it up! On photo-etch parts what I use is masking tape on the backs so the small parts don't get lost to the carpet monster, but don't get discouraged, the secret is to have fun!
Our friend Don has a jewelers bench. It has an apron attached across the front of the bench that you slip on like an apron. Any dropped parts stay neatly in the apron. Works great when he uses it which is never cause it’s a pain in the but. But if he’s ever mounting a 10,000 dollar diamond to his locomotive he may well use it!
@@ToyManTelevision That's cheating! But also an excellent idea to use while building models, I've always used masking tape on PE frets while cutting the parts free, also use the old Waldron PE bending tool when working PE, but now I think Trumpeter has a PE tool that looks like they copied the Waldron tool and is a bit more pricey to purchase too. But like I said KEEP IT UP AND HAVE FUN, BECAUSE YOUR DOING GREAT WORK ON YOUR METAL EARTH PROJECTS!!! Now I'd like to see you do updates on those too while your having fun goofing around in your attic!
Thanks for sharing! I tried to do the Saturn V rocket and lost patience with it. It probably wasn't the best one to start with and I didn't do well. Maybe I'll try it again in the future.
No with these you need to start on the easy ones. Really easy if you get over the learning curve. Get the trolley. Comes with a tool you need and really shows you how to build these. After a few it’s actually sort of easy. And really fun.
I used to buy them in Iowa at a Hobby and craft store in the Big Mall in Desmoines. I have most of the Star Trek ones . I havent built any except the original Enterprise. Sadly I assembled the engine struts backwards, then broke it trying to repair it. I believe I purchased a replacement. I do have the HogWarts Express as well as several other trains. My first one was a TRAIN. I love the detail and think its awesome they finally colorized some of them. Do you remember the Tin toys from the 50's and 60's? They remind me of those. I used to disassemble them to see what made them work.
Yup the ones in the 50’s had Japanese printing inside. Because they were made from reused metal that was intended for food cans but never used. Fun to find them in antique stores. And look at the printing inside.
Now that is really interesting, I can see why Karen has problems with eye strain right now. I think a magnified hood and light would be in order for putting these together. They're in Seattle you say I'll have to look the next time I'm down that way.
OK Karyn ! You’ve Caught me off-guard ! Now you got to do is do a little demonstration on one of the more easier ones ! I know you have to use snips like we usually use in model railroading ! Especially when you’re cutting ‘Track’ that’s only on “N” or “Z” scale !!! Not a Lotta good for HO because it’s too thick but, I think I have one ! And just out of curiosity, didn’t you do the (“command module, service module, & the lunar module”) too at an earlier date when you first introduced us to them ???? If I remember correctly those three were some of the kits that came out along with the Star Wars & others ! 🌊🐺
Hey wonderful job Karen I myself have built a few form there star wars line and a oil tanker and off shore oil platform a D9 bulldozer and a few others I use them to get out of a slump I build scale models as a hobby just for fun my way of goofing off lol
The Parts that fly when you clip them I will take a storage tote lay it on its side and clip my small parts close to the back wall so I am covered on 5 sides less chance of losing them great video thank you for sharing
I had to laugh when I read the title. My wife has the addiction too. she has built several and plans to do more. She is presently working on a 1/350 Titanic. If you have time stop by our channel and check it out.
Yup. Good times. Years ago the rage was to do these huge ships in about 1:12 scale. I saw several including a Titanic. Part of the upper decks lifted off and you got in and laid down. Then someone would close it up putting the upper decks back on. The “captain” could see out through an opening. Then off you go sailing your queen marry or whatever. I wonder if anyone is still doing that.
I am a child of styrene models. Can only imagine what the other stuff was like. My father and uncle were into model air planes. Ones that had fairly large wing span for the day.
The celluloid was mostly the same and they kept making them until like 1965 or so. More brittle but when you opened the box this weird stink came out. Smells like a paper mill if you’ve ever smelled that. And over time it usually warped. Johan cars usually ended up with the “Johan” smile. Warped to the point the whole model had a “smile” to it
I am sure I probably built celluloid models but just don’t have a recollection. Some of the plastics had not so pleasant smells associated with them. Looking forward to your next adventure.
Take a look at the Metal Earth freight train set. You may notice that it copies, piece for piece, a Bachmann HO scale BNSF beginner set, right down to the fictional paint scheme that Bachmann created on the caboose.
GOOD VIDEO VERY INTERESTING AND INFORMATIVE THANK YOU BOTH. KAREN THIS IS GREAT HOBBY THANK GOODNESS FOR YOUR SCREWING AROUND TIME AND YOUR BOTH EFFORTS AND ALLOW US THE SUBSCRIBER TO GET TO SEE YOUR GOOD COLLECTION AND WATCH YOU GROW IT AND YOR COMMENTS AS WELL THANK YOU AGAIN FOR YOUR VIDEO AND YOUR INFORMATION AND COMMENTS VERY INTERESTING TO SEE THANK YOU AGAIN BE SAFE AND CAREFUL YOU TWO. JIM KAMMERER OF PHILADELPHIA PA GREAT VIDEO. 👍👍👍👍👍👌👌👌👌
I am just, "Gob-Smacked" by Bride of Toy man's amazing talent. and skill. I knew Karyn was crafty but this takes talent, "kicked-up notches un heard of." As Emeril would of said. Keep up with the "way-cool" minis. Greg and Jeanne
These are incredibly tricky to build, but if you start with the easy ones and move up there are techniques which are easy to master. But some people jump in and buy a really complicated kit first and can never build it
@@ToyManTelevision yea that's great advice. I got frustrated in a level easy kit as my first build but eventually perseveared and got more confident and patient with each build..
Hum... I’m sure that would work. Scan the plans. The photos of the sheets. Blow up on a copy machine at kinkos contact cement to foam core, exacto and bingo!!!!!
Glad to see that you are putting your education first! Both Dale and I worked in education, so we know that your studies must come first! Do stop by as often as you can, and binge-watch when you have some time. Best of luck!
1950! I may be old but not quite that old. I started building models in the 60’s. Mostly rockets missiles, and ships. Those were the days and I wasn’t that good.
Ken Shores that’s when model building took off in the US. Celluloid plastic had opened a new market, plastic models. But celluloid acetate smelled bad and warped. Celluloid models had Already taken off in Britain and Japan. Then in about 1960 styrene plastic came out. And boom! International fad! Every company releasing models as fast as they could. My grade school had model contests. As did most! Bigger than video games today.
Wow how amazing! Looks like a ton of fun.
They are a challenge, for sure! But... I decided to put myself up to the challenge, just to see if I could!
Not sure what I like more about your shows -- the fact you're having so much fun or that you are excellent modelers. So I'll just enjoy. Thank you! Tom Kibbe
Hi Tom. Your current year gets a kick out of building bows metal earth models. I’ve never attempted one but it’s tempting
So cool Karyen! The detail! Probably too small for my big mitts and older eyes. Wonder if they have larger scale kits? Thanks again for the videos!
Wish they did!! Karyn can do this but I’m having problems anymore with shaking hands and so on. So I’m sticking to 1:20 scale trains and 1/8 scale autos!
Fantastic; and never boring! I reckon my wife would enjoy building a loco or a coach. Loved it.
Those are some neat small models good luck with them Mrs Karyn
Thanks! Fun to do!
Beautiful! Those are really nice!
Well done!
She’s on the mogul right now. Looking great. Now that it’s taking shape we can see it’s HOn3. Anyway looking so good’.
You two are always discovering new things-I think they're new. It was fun watching the discussion, execution and displaying these wonderful little kits. They look tedious but rewarding.
Further Screwing Around should include the Eccles Organ Festival Recitals in the Cathedral of the Madeleine. Some very fine pipe organ music.
I like the tedious part... Keeps my mind occupied!
Good episode. Enjoy watching different kinds and types of model kits that are available.
So many. There was a time in about 1950 when most modelers knew mostly what was available. Not counting old wood and paper kits. But now there are hundreds of thousands if not millions
Very cool!!! Great work!
She’s working on the mogul right now. And I’m editing. Hum. I’m jealous. I wanna play!
Super cool great job I never seen these I need to keep my eye out and buy one because they look fun thanks
Start with the small trolley. Builds in about an hour. Comes with tweezers.
They are great looking models and you have done such a good job of them Karyn. Being a railway buff I like the look of the locomotive and will be interested to see it finished
She is about half way. Just put the cylinders and side rods on. Definitely HOn3.
Oh my! Love those models! I had seen those types of kits at Hammonds Toys hobby store last year. I was sceptical on picking one up, but after seeing Karyns I'll have to try one out!
Thanks again for another great episode!
Start with one of the easy ones.. They go together fast, and that way you get an idea of how the more complicated ones will go. I also use a pen or pencil to cross through each step of the instructions, after completion. That way, I don't lose track of where I am when I resume the project. It will take a bit longer to assemble the more complicated ones. Good luck! Enjoy!
@@karynfelix-the-Cat thanks for the tip! I'll purchase the locomotive of course, but I'll pick up a couple easy ones as well to cut my teeth on.
They are cool i half built 35 to 40 of those
@@robertemmons2260 Just not the fingers!
Interestingly it seems that they use Bachmann trains as their prototypes for the railroading models. The loco you have is a dead ringer for the ON30 mogul, right down to using the same number, there 4-4-0 is a copy of Bachmann's updated HO model which in turn is based off Rivarossi's models, and their "Complete Freight Train" uses the Bachmann Rail Chief set.
Accucraft 1:29 models were mostly taken from Rivarossi HO models. That’s how they ended up 1:29. 3x29=87. So exactly 3 times bigger. I did the show in scale and gauge. Need to redo it but that’s explained in there. The pattern models were done in 1:29 and the molds pantographed to 87.
That Concord stagecoach really is beautiful. Love the detail. Would have to keep them in a glass case to keep them clean I suppose. I'd hate to have to dust them if they were just placed on a shelf.
No kidding! Display cases are essential!!
Thanks to you lovely couple ,... I’ve just bought the stage coach ...!
Hi. That’s a hard one! Once you get the hang of these they are easy to figure out. I think it’s their best model though.
Those look great, too small and delicate for my old eyes but they are very Cool
Great job Karyn, please show us the locomotive when you finish it
Rick B aka Plastic butcher
Yup. She’s building it right now!
Very cool! My husband has several of those Metal Works he built. He even built the Seattle Space Needle. But he gave that one away to a friend who was from Seattle. Anyway, gotta love those hobbies. I build model train layouts and so I really enjoy the road trips you two take and all the neat model trains. The Evanston, WY video was cool because we live only an hour and a half away and we went to that train show. Thanks for the great videos!!
I think Evanston is an hour and a half away from just about everything! No matter where you are, there it is an hour and a half away! But it’s a great train show.
Tram at 0:59 appears to be a Melbourne (Victoria, Australia) tram car No 884 of the SW6 class, built 1943. Original it would have been fitted with a pole at both ends to collect power off the overhead. The model is depicted with a pantograph. The multiple lights either side of the headlight were fitted in the early 1970's.
From what I can see this tram is not listed as being in service or preserved, although sister tram 916 is shown as being in San Francisco, California.
YUP THATS THE ONE!!! Really hard to build. But looks great. Trolley poles. I can see why the used a pantograph. Looks cool. But in the real world back then it was mostly poles. On our local Kennacott line they had both! Pantograph and a higher voltage on the main. Trolley poll, center mounted that swings in both directions on the other tracks. Really impressive to watch them switch from the pole to the pantograph. Like fireworks 🎇
Keep it up! On photo-etch parts what I use is masking tape on the backs so the small parts don't get lost to the carpet monster, but don't get discouraged, the secret is to have fun!
Our friend Don has a jewelers bench. It has an apron attached across the front of the bench that you slip on like an apron. Any dropped parts stay neatly in the apron. Works great when he uses it which is never cause it’s a pain in the but. But if he’s ever mounting a 10,000 dollar diamond to his locomotive he may well use it!
@@ToyManTelevision That's cheating! But also an excellent idea to use while building models, I've always used masking tape on PE frets while cutting the parts free, also use the old Waldron PE bending tool when working PE, but now I think Trumpeter has a PE tool that looks like they copied the Waldron tool and is a bit more pricey to purchase too. But like I said KEEP IT UP AND HAVE FUN, BECAUSE YOUR DOING GREAT WORK ON YOUR METAL EARTH PROJECTS!!! Now I'd like to see you do updates on those too while your having fun goofing around in your attic!
Thanks for sharing! I tried to do the Saturn V rocket and lost patience with it. It probably wasn't the best one to start with and I didn't do well. Maybe I'll try it again in the future.
No with these you need to start on the easy ones. Really easy if you get over the learning curve. Get the trolley. Comes with a tool you need and really shows you how to build these. After a few it’s actually sort of easy. And really fun.
I used to buy them in Iowa at a Hobby and craft store in the Big Mall in Desmoines. I have most of the Star Trek ones . I havent built any except the original Enterprise. Sadly I assembled the engine struts backwards, then broke it trying to repair it. I believe I purchased a replacement. I do have the HogWarts Express as well as several other trains. My first one was a TRAIN. I love the detail and think its awesome they finally colorized some of them. Do you remember the Tin toys from the 50's and 60's? They remind me of those. I used to disassemble them to see what made them work.
Yup the ones in the 50’s had Japanese printing inside. Because they were made from reused metal that was intended for food cans but never used. Fun to find them in antique stores. And look at the printing inside.
@@ToyManTelevision I forgot about those! Yes I remember that. I remember getting a few " recycled" toys.
I bought one of those and I thought I was going to build it. NOT ANYMORE! 🙁 Way to delicate for my big paws! 🐾
They are tiny. And smaller than that. Then you need to fold at right angles and stick a tab in a slot. Did I mention and it’s tiny?
Nice work! I too, have gotten bit by metal earth bug! Love 'em! Want another challenge: try miniature dollhouse models.
Hadn’t heard of those. Wow. They are amazing.
You can find them on amazon.
I bought one a few months ago (Ford Mustang) I forgot I had it till now. I guess i'll have to get started on building it.
Better to start with simple ones. As it’s a learning curve. Not sure on the mustang how hard it is.
Now that is really interesting, I can see why Karen has problems with eye strain right now. I think a magnified hood and light would be in order for putting these together.
They're in Seattle you say I'll have to look the next time I'm down that way.
Yes! The magnifying hood and light are a wonderful idea! Christmas is right around the corner, and I will put this on my Santa list! Thanks!
OK Karyn ! You’ve Caught me off-guard ! Now you got to do is do a little demonstration on one of the more easier ones ! I know you have to use snips like we usually use in model railroading ! Especially when you’re cutting ‘Track’ that’s only on “N” or “Z” scale !!! Not a Lotta good for HO because it’s too thick but, I think I have one ! And just out of curiosity, didn’t you do the (“command module, service module, & the lunar module”) too at an earlier date when you first introduced us to them ???? If I remember correctly those three were some of the kits that came out along with the Star Wars & others ! 🌊🐺
Hey wonderful job Karen I myself have built a few form there star wars line and a oil tanker and off shore oil platform a D9 bulldozer and a few others I use them to get out of a slump I build scale models as a hobby just for fun my way of goofing off lol
Yea these are so fun! And boy do they make a bunch of them! Antique cars coming soon!
The Parts that fly when you clip them I will take a storage tote lay it on its side and clip my small parts close to the back wall so I am covered on 5 sides less chance of losing them great video thank you for sharing
I must try that! But... When I flip one of those tiny parts, I have had it land on me! Physics are amazing sometimes!
I had to laugh when I read the title. My wife has the addiction too. she has built several and plans to do more. She is presently working on a 1/350 Titanic. If you have time stop by our channel and check it out.
Yup. Good times. Years ago the rage was to do these huge ships in about 1:12 scale. I saw several including a Titanic. Part of the upper decks lifted off and you got in and laid down. Then someone would close it up putting the upper decks back on. The “captain” could see out through an opening. Then off you go sailing your queen marry or whatever. I wonder if anyone is still doing that.
great video toy man :)
Thanks!!!! Karyn’s building as we speak. And I’m editing. What’s with that? I wanna play too
I am a child of styrene models. Can only imagine what the other stuff was like. My father and uncle were into model air planes. Ones that had fairly large wing span for the day.
The celluloid was mostly the same and they kept making them until like 1965 or so. More brittle but when you opened the box this weird stink came out. Smells like a paper mill if you’ve ever smelled that. And over time it usually warped. Johan cars usually ended up with the “Johan” smile. Warped to the point the whole model had a “smile” to it
I am sure I probably built celluloid models but just don’t have a recollection. Some of the plastics had not so pleasant smells associated with them. Looking forward to your next adventure.
Nice job,putting that together.what scale is Mickeys wheel?
Tiny!! Tinker bell scale? Hum. I’d say the real one is 150 feet. About. The model is about 4 inches. 150x12=1800/4=450. So 1:450 about.
Take a look at the Metal Earth freight train set. You may notice that it copies, piece for piece, a Bachmann HO scale BNSF beginner set, right down to the fictional paint scheme that Bachmann created on the caboose.
They do that right? Watch Tuesday as we show side by side the metal earth stage coach and the $175 Spanish model it’s based on.
Wow thay look cool
The stage is the best. Just wow!!!!!!
GOOD VIDEO VERY INTERESTING AND INFORMATIVE THANK YOU BOTH. KAREN THIS IS GREAT HOBBY THANK GOODNESS FOR YOUR SCREWING AROUND TIME AND YOUR BOTH EFFORTS AND ALLOW US THE SUBSCRIBER TO GET TO SEE YOUR GOOD COLLECTION AND WATCH YOU GROW IT AND YOR COMMENTS AS WELL THANK YOU AGAIN FOR YOUR VIDEO AND YOUR INFORMATION AND COMMENTS VERY INTERESTING TO SEE THANK YOU AGAIN BE SAFE AND CAREFUL YOU TWO. JIM KAMMERER OF PHILADELPHIA PA GREAT VIDEO. 👍👍👍👍👍👌👌👌👌
She’s now doing dioramas in little tins. With lights and everything. We need to do a show. I’ve got them on Facebook
I am just, "Gob-Smacked" by Bride of Toy man's amazing talent. and skill. I knew Karyn was crafty but this takes talent, "kicked-up notches un heard of." As Emeril would of said. Keep up with the "way-cool" minis. Greg and Jeanne
She’s building the mogul right now. We were going swimming but she wanted to build instead. Kids. Always with the models.
just saw these at Hobby Lobby.
David Prins they are really fun. The hard ones are really small parts and tricky. Which is why they are fun when you get them figured out
I got hooked too. Mainly cuz I like to build Lego kits but I wanted something more challenging and less wallet killing
These are incredibly tricky to build, but if you start with the easy ones and move up there are techniques which are easy to master. But some people jump in and buy a really complicated kit first and can never build it
@@ToyManTelevision yea that's great advice. I got frustrated in a level easy kit as my first build but eventually perseveared and got more confident and patient with each build..
Surprised she hasn't built 844!
John Kuzma soon!
I believe that the airplanes can be converted into a foam board rc airplane using the model for reference
Hum... I’m sure that would work. Scan the plans. The photos of the sheets. Blow up on a copy machine at kinkos contact cement to foam core, exacto and bingo!!!!!
@@ToyManTelevision have you heard about Flite Test check them out
I have the tardis which I haven’t stared because it’s intimating.
They are tricky. Start with the little trolley. Cool kit and much easier to start with.
Hay toyman sorry I have not stopped in in a while schools been hard
Glad to see that you are putting your education first! Both Dale and I worked in education, so we know that your studies must come first! Do stop by as often as you can, and binge-watch when you have some time. Best of luck!
Thanks and good day
How many metal earth kits has your wife put together
Hum.... six I think. Working on one right now!
@@ToyManTelevision ok cool i have built between 35 ore 40 of them i am getting ready to built one right now
1950! I may be old but not quite that old. I started building models in the 60’s. Mostly rockets missiles, and ships. Those were the days and I wasn’t that good.
Ken Shores that’s when model building took off in the US. Celluloid plastic had opened a new market, plastic models. But celluloid acetate smelled bad and warped. Celluloid models had Already taken off in Britain and Japan. Then in about 1960 styrene plastic came out. And boom! International fad! Every company releasing models as fast as they could. My grade school had model contests. As did most! Bigger than video games today.