Just a quick note for future viewers, most auto parts stores will let you borrow their ball joint removal kit, which includes the sockets for both the small and large Mopar ball joints.
I've had them for probably 20 years, so not sure where those specific ones came from. I just checked and Rock auto has them for $7-$20 depending on manufacturer. I just looked up a 70 dart, suspension, alignment cam. The Moog part number is K8243A and is a pair.
What size are your wheels and drums? I have the 5x4 inch small bolt pattern. It looks like you do too. On their website it says not recommended for rims with 9 inch drums and that’s what I have but it looks similar to yours. I have a 1968 Dodge Dart 270 slant six.
I have 15" rallye wheels with large bolt pattern that I'm putting on. I'm guessing that if you use 14" wheels, you might not have space inside them for the calipers.
Wow, great video! I’m currently doing a front disc brake conversion on my 1967 Dart GT. I’m sure your in depth videos will come in handy, thank you!
Just a quick note for future viewers, most auto parts stores will let you borrow their ball joint removal kit, which includes the sockets for both the small and large Mopar ball joints.
Did you warn me not to over-tighten anything? To be honest, I kinda zoned out a bit, but didn't notice the warning.
Not on this one. It was all disassembly, so by all means, go all Dr. Torque on it.
I'm pretty sure I could rip the threads out on the upper joint. I'm that good.
You could have used your press to push out the old bushings as well.
I always have trouble getting those bushings aligned straight with the press ram
Where did you buy your camber bolts? I have my ball joints and bushings. Thank you.
I've had them for probably 20 years, so not sure where those specific ones came from. I just checked and Rock auto has them for $7-$20 depending on manufacturer. I just looked up a 70 dart, suspension, alignment cam. The Moog part number is K8243A and is a pair.
@@YoshimoshiGarage Perfect. I was searching "camber bolt". I found them under alignment cam. Thanks!
What size are your wheels and drums? I have the 5x4 inch small bolt pattern. It looks like you do too. On their website it says not recommended for rims with 9 inch drums and that’s what I have but it looks similar to yours. I have a 1968 Dodge Dart 270 slant six.
I have 15" rallye wheels with large bolt pattern that I'm putting on. I'm guessing that if you use 14" wheels, you might not have space inside them for the calipers.
@@YoshimoshiGarage Okay thank you
Did the kit come with upper ball joints?
The kit did not come with the upper ball joints, bushings or camber bolts - I bought those separately.
Pirate Jacks stuff is junk!