hey oliver, I'm just about to see which machine I should buy. to choose from: bishop packer acus m1 I am currently using the inkjecta nano ultra lite can you recommend me one?
Just had both my hands done. Strangely didn’t hurt getting done. Stinging and swelling the itch is unreal .2 days later. But fuck me when the scabs start itching is the worst part of a tattoo, ever. And I’m pretty much covered 🤣 class work mate love these type tattoos ❤️
@@Cody2nd i do know and understand, but there’s also nothing wrong with trying different volts and see why these artists do such a good job by using them the first place
I prefer hz display over going by voltage like with the acus or any machine since hz display is showing the exact cps of or how many times the needles hitting the skin . 1hz= 1cps ,80hz=80cps,120hz=120cps it's really an easier system to dial in than going by voltage from machine to machine since 3 different machines at the same voltage can each be running roughly +/- 5-50 cps differently or more depending apon the motor parameters with machines ranging from being 10v,12v,18v machines etc. Sticking with the acus and dialing things in this may help you or anyone with or looking into one as far as understanding the motor settings and the capable power/torque output of each mode/motor it basically being 6 motors in 1. m-3=1w / m-2=3w /m-1=5w / m-0=9w / m+1=10w /m+2=12w. Where the torque output of m-1=5w motor setting is similar to the motor driving a bishop wand shader/packer ,where the m+1=10w setting would be similar to the torque output of the motor driving the sol nova .for good references points that can help dial things in quicker. Hope this helps in some way .
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Your work is unreal 👌👏👏👏
hey, what,s up from Guelph, Ontario, Canada.
Your vdos are the best and so informative.
keep up the great work.
The fact you still use the bishop sometimes even tho you're on the acus pro team is a testament to both machines. Cheers for keepin it real bruv 🤙
Good work bro 👏 Shut out from California.
Why bishop ? Not acus M1 ?
Damn watching it take shape is insane! Good shit Man! 💯💯
what machine do you use?
Thanks for sharing very helpful video.....!!!!!!
hey oliver, I'm just about to see which machine I should buy.
to choose from:
bishop packer
acus m1
I am currently using the inkjecta nano ultra lite
can you recommend me one?
Looks like, I just found my master OLIVER! Heaven with fire 🔥. hahaha.
Melhor canal do UA-cam 🙌🙌👏👏👏
Hi, can I ask you what type of stroke do you use?
3.7 :)
what needle do you use friend?
Just had both my hands done. Strangely didn’t hurt getting done. Stinging and swelling the itch is unreal .2 days later. But fuck me when the scabs start itching is the worst part of a tattoo, ever. And I’m pretty much covered 🤣 class work mate love these type tattoos ❤️
Proper piece Brother!
What voltage are you running?
What sort of hand pressure do you use when shading?or do you use none and just guide the machine?im really struggling with it.
Thanks!
Thank you for another great session !! Do you always use pendulum shading to saturate the skin?
Awsome as usual. Please do the podcast with Acus people.
Hello O! How much Voltage do you have while shading?
5
@@hunter8203 when did he say that brodie? what time’s the stamp?
@@dreaming_insanity 1:20:19
@@dreaming_insanity just before
@@Cody2nd i do know and understand, but there’s also nothing wrong with trying different volts and see why these artists do such a good job by using them the first place
I prefer hz display over going by voltage like with the acus or any machine since hz display is showing the exact cps of or how many times the needles hitting the skin . 1hz= 1cps ,80hz=80cps,120hz=120cps it's really an easier system to dial in than going by voltage from machine to machine since 3 different machines at the same voltage can each be running roughly +/- 5-50 cps differently or more depending apon the motor parameters with machines ranging from being 10v,12v,18v machines etc. Sticking with the acus and dialing things in this may help you or anyone with or looking into one as far as understanding the motor settings and the capable power/torque output of each mode/motor it basically being 6 motors in 1. m-3=1w / m-2=3w /m-1=5w / m-0=9w / m+1=10w /m+2=12w. Where the torque output of m-1=5w motor setting is similar to the motor driving a bishop wand shader/packer ,where the m+1=10w setting would be similar to the torque output of the motor driving the sol nova .for good references points that can help dial things in quicker. Hope this helps in some way .
Great work as always
Do you ever line with grey wash?
We’re r u from
From the UK!
Another one brother🔥 love doin hands
i like thank!
Sick dude!
What brand carts you using ?
He never replies .. So I gave up and unsubscribed
9 bug pin in a 7 mag shader tube??
Fuck I'm paying for for my hand piece about the same kind of tattoo for 500 for 4 hours when it might only take 2 hours
Incredible
foooda d mais
Wow
Well done looks tight but a scary nun….bit of an odd tat I wouldn’t choose it myself but hey whatever.